微薄梁三点弯曲的尺度效应研究
THREE-POINT MICROBEND SIZE EFFECTS FOR PURE NI FOILS
查看参考文献17篇
文摘
|
应用高灵敏度的力传感器以及时间序列电子散斑干涉法,同时测出了不同厚度纯镍薄片三点弯曲试件的抗力与变形,得到薄梁中心点处的载荷与挠度曲线.应用Fleck和Hutchinson的偶应力理论,结合平面应变弯曲模型,建立了薄梁处于弹性状态和弹塑性状态的控制方程,应用Runge-Kutta法进行数值求解,并将计算得到的载荷-挠度曲线以及无量纲化弯矩-表面应变曲线和实验结果进行了比较.在理论计算过程中,没有拟合任何材料参数,所有的材料参数均来自实验测量的结果,材料特征尺度也是根据Stolken和Evans的工作给出的.结果表明:应用偶应力理论预测的结果和实验结果符合良好,而经典理论的预测结果与实验不相符合. |
其他语种文摘
|
The three-point microbend tests are performed for the pure Ni foils with different thicknesses. The deflection and load are measured by employing the sequence pulse counting method and a high sensitive micro load-sensor, respectively. All experimental results are analyzed using couple stress theory by Fleck and Hutchinson in which only rotation gradient is considered. Based on the plane-strain model we have derived the differential equations and boundary conditions, which include the effect of couple stress. The differential equations are solved by the Runge-Kutta method. The numerical results are compared with the experimental data. There is no any fitting parameter in the present theoretical calculation. All material parameters are taken from the experimental measurements. The length scale is taken from the work of Stolken and Evansl. The present theoretical predictions are in good agreement with the experimental data. |
来源
|
力学学报
,2007,39(4):479-485 【核心库】
|
关键词
|
偶应力
;
微薄梁三点弯曲
;
应变梯度
;
Runge-Kutta法
|
地址
|
1.
中国科学院力学研究所, 非线性力学国家重点实验室, 北京, 100080
2.
清华大学工程力学系, 北京, 100084
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0459-1879 |
学科
|
力学 |
基金
|
国家自然科学基金资助项目
|
文献收藏号
|
CSCD:2840004
|
参考文献 共
17
共1页
|
1.
Fleck NA. Strain gradient plasticity:theory and experiment.
Acta Metall Mater,1994,42(2):475-487
|
被引
194
次
|
|
|
|
2.
Stolken JS. A microbend test method for measuring the plasticity length scale.
Aeta Mater,1998,4(14):5109-5115
|
被引
118
次
|
|
|
|
3.
Nix WD. Mechanical properties of thin films.
Metall Trans,1989,20:2217-2245
|
被引
47
次
|
|
|
|
4.
Stelmashenko NA. Microindentations on W and Mo oriented single crystals:An STM study.
Aeta Metall Mater,1993,41(10):2855-2865
|
被引
24
次
|
|
|
|
5.
Ma Q. Size dependent hardness of silver dingle crystals.
J Mater Res,1995,10(4):853-863
|
被引
60
次
|
|
|
|
6.
Pool WJ. Micro-hardness of annealed and Work-hardened copper polycrystals.
Scripta Metal Mater,1996,34(4):559-564
|
被引
1
次
|
|
|
|
7.
Fleck NA. A phenomenological theory for strain gradient effects in plasticity.
J Mech Phys Solids,1993,41(12):1825-1857
|
被引
80
次
|
|
|
|
8.
Acharya A. On Non-local Flow Theories That Preserve the Classical Structure of Incremental Boundary Value Problems.
Micromechanics of Plasticity and Damage of Multiphase Materials, IUTAM Symposium,1995
|
被引
1
次
|
|
|
|
9.
Shizawa K. A thermodynamical theory of gradient elastoplasticity with dislocation density tensor I:Fundamentals.
Int. J. Plastwity,1999,15:938
|
被引
1
次
|
|
|
|
10.
郭香华. 用电子散斑法对纯镍薄片弯曲变形的测量.
力学与实践,2005,27(2):22-25
|
被引
5
次
|
|
|
|
11.
Fleck NA. Strain gradient plasticity.
Advances in, Applied Mechanics,1997,33:295-361
|
被引
87
次
|
|
|
|
12.
Gao H. Mechanismbased strain gradient plasticity I. -Theory.
J Mech Phys Soblids,1999,47:1239-1263
|
被引
135
次
|
|
|
|
13.
Chen SH. A new hardening law for strain gradient plasticity.
Acta Mater,2000(48):3997-4005
|
被引
1
次
|
|
|
|
14.
Chen SH. A new deformation theory with strain gradient effects.
International Journal of Plasticity,2002,18:971-995
|
被引
19
次
|
|
|
|
15.
Chen SH. Strain gradient theory with couple stress for crystalline solids.
Eur J Mech A/Solids,2001,20:739-756
|
被引
11
次
|
|
|
|
16.
Gao H. Taylor-based nonlocal theory of plasticity.
Int J Solids Struct,2001,38:2637
|
被引
1
次
|
|
|
|
17.
Lam DCC. Experiments and theory in strain gradient elasticity.
J Mech Phys Solids,2003,51:1477
|
被引
1
次
|
|
|
|
|