AM60B镁合金微弧氧化膜层的结构与性能研究
Study on structure and properties of microarc oxidation coating formed on AM60B magnesium alloy
查看参考文献11篇
文摘
|
为了提高镁合金的耐腐蚀性能,用微弧氧化方法在AM60B镁合金表面生成了氧化物膜层.利用扫描电镜、X射线衍射分析了膜层的形貌、结构和组成.研究表明,氧化膜可分为两层,外层疏松多孔,内层结构致密,膜层主要由MgO、Mg_2SiO_4和少量MgAl_2O_4相组成,从外层到内层,Mg_2SiO_4相含量减少,MgO相含量增大.与镁合金基体相比,氧化物膜层表面硬度提高7~8倍. 在质量分数为3.5%NaCl溶液中的动电位极化测试表明,微弧氧化处理使镁合金的耐蚀性能得到了明显提高. |
其他语种文摘
|
Oxidation coatings were produced on AM60B Mg alloy substrates using the Microarc oxidation (MAO) technique in order to improve the anti-corrosion property of Mg alloy. The morphology, structure and composition of oxidation coatings were investigated by SEM and XRD. The results show that there are two layers in microarc oxidation coating, of which outer layer is loose and porous, inner layer is dense in structure. The coating is mainly composed of MgO, Mg_2SiO_4 and little MgAl_2O_4. The content of Mg_2SiO_4 decreases while MgO increases from outer layer to inner layer. The surface microhardness of MAO coatings is 7 ~ 8 times higher than Mg alloy substrate. The potentiodynamic polarization test in 3. 5w.t% NaCl solution indicates that the oxidation coating enhanced evidently the anti-corrosion of the magnesium alloy. |
来源
|
材料科学与工艺
,2007,15(3):309-312 【核心库】
|
关键词
|
微弧氧化
;
镁合金
;
氧化膜
;
耐蚀性
|
地址
|
中国科学院,兰州化学物理研究所, 固体润滑国家重点实验室, 甘肃, 兰州, 730000
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1005-0299 |
学科
|
金属学与金属工艺 |
基金
|
国家自然科学基金资助项目
;
国家863计划
;
国家自然科学基金
|
文献收藏号
|
CSCD:2835314
|
参考文献 共
11
共1页
|
1.
曾小勤. 镁合金应用新进展.
铸造,1998(11):39-43
|
被引
79
次
|
|
|
|
2.
师昌绪. 加速我国金属镁工业发展的建议.
材料导报,2001,15(4):5-6
|
被引
126
次
|
|
|
|
3.
GRAY J E. Protective coatings on magnesium and its alloys-a critical review.
Journal of Alloys and Compounds,2002,336:88-113
|
被引
441
次
|
|
|
|
4.
YEROKHIN A L. Plasma electrolysis for surface engineering.
Surface and Coatings Technology,1999,122:73-93
|
被引
396
次
|
|
|
|
5.
刘建平. 微弧氧化技术及其发展.
材料导报,1998,12(5):27-29
|
被引
20
次
|
|
|
|
6.
KUHN A. Plasma anodizing of magnesium alloys.
Metal Finishing,2003,101(9):44-50
|
被引
7
次
|
|
|
|
7.
薛文彬. 镁合金微等离子体氧化膜的特性.
材料科学与工艺,1997,5(2):89-91
|
被引
31
次
|
|
|
|
8.
蒋百灵. 镁合金微弧氧化陶瓷层显微缺陷与相组成及其耐蚀性.
中国有色金属学报,2002,12(3):454-457
|
被引
80
次
|
|
|
|
9.
YEROKHIN A L. Phase formation in ceramic coatings during plasma electrolytic oxidation of aluminium alloys.
Ceramic international,1998,24:1-6
|
被引
54
次
|
|
|
|
10.
魏同波. 铝合金微弧氧化陶瓷膜的性能研究.
材料科学与工程学报,2004,22(4):564-567
|
被引
8
次
|
|
|
|
11.
武显亮. 镁合金阳极氧化膜的电化学评价.
全国腐蚀电化学进展与应用学术研讨会论文集,2000:202-206
|
被引
1
次
|
|
|
|
|