铜-铝扩散焊及拉伸的分子动力学模拟
Molecular dynamics simulation of the diffusion bonding and tensile behavior of a Cu-Al interface
查看参考文献18篇
文摘
|
采用分子动力学方法模拟了铜-铝扩散焊过程,分析了理想平面铜-铝试件(001)晶面间扩散焊的过渡层厚度,并利用径向分布、键对分析方法分析了在不同的降温速率下过渡层的结构变化.降温速率大时,过渡层保持原有无序结构,降温速率小时,过渡层从无序结构向面心立方结构转变.还对扩散焊后的铜-铝试件进行了拉伸模拟,并与尺寸大小相近的单晶铜和单晶铝的拉伸模拟结果进行比较.结果发现焊接后的强度比单晶铝和单晶铜的强度都要小,最大应变值也小. |
其他语种文摘
|
In this paper, we use molecular dynamics simulations to study the diffusion bonding of a Cu/Al interface. The interface analyzed is that between atomically smooth (001) crystalline planes of a Cu and an Al single crystals. The thickness of the transition layer of the bonded interface is obtained. The structural change of the interfacial region under different cooling rates is analyzed by means of the radial distribution function (RDF) and the pair analysis techniques. The interface assumes an amorphous structure upon initial mechanical pressing and remains amorphous if the subsequent cooling rate is high. At lower cooling rates, however, the interface structure becomes crystalline. The diffusion-bonded Cu/Al specimen is subjected to tensile loading and its strength is compared with those of single-crystalline Cu and single-crystalline Al of the same size along the same direction. Calculated results indicate that the specimen with the interface has a lower tensile strength and a lower ductility than the corresponding single-crystalline Cu and Al specimens. |
来源
|
物理学报
,2007,56(1):407-412 【核心库】
|
DOI
|
10.7498/aps.56.407
|
关键词
|
分子动力学
;
扩散焊
;
拉伸
;
应力应变
|
地址
|
1.
北京航空航天大学物理系, 北京, 100083
2.
美国乔治亚理工学院机械工程学院及材料科学与工程学院, 乔治亚
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1000-3290 |
学科
|
物理学 |
基金
|
国家自然科学基金
;
中国科学院计算数学与科学工程计算研究所科学与工程计算国家重点实验室基金
|
文献收藏号
|
CSCD:2671338
|
参考文献 共
18
共1页
|
1.
郑立宝. 单空位体系多尺度模拟.
物理学报,2005,54:5274
|
被引
2
次
|
|
|
|
2.
Ren Ji.
Materials Letters,2002,56:647
|
被引
1
次
|
|
|
|
3.
Rodrigo H P.
Materials Science and Engineering A,2004,384:262
|
被引
4
次
|
|
|
|
4.
Liu Li.
Materials Science and Engineering A,2001,315:103
|
被引
1
次
|
|
|
|
5.
Qiang L.
Materials and Design,2003,24:493
|
被引
1
次
|
|
|
|
6.
Lu F.
Computational Materials Science,2004,29:371
|
被引
3
次
|
|
|
|
7.
李亚江. Cu/Al真空扩散焊接头显微组织分析.
中国有色金属学报,2001,11:424
|
被引
18
次
|
|
|
|
8.
Chen S D.
Scripta Materialia,2005,52:1135
|
被引
16
次
|
|
|
|
9.
Koch CC.
Materials Science Forum,1999:312
|
被引
1
次
|
|
|
|
10.
Wu H A.
Mechanics Research Communications,2006,33:9
|
被引
12
次
|
|
|
|
11.
文玉华. 纳米晶钢单向拉伸变形的分子动力学模拟.
力学学报,2002,34:29
|
被引
15
次
|
|
|
|
12.
杨全文. 纳米铜团簇凝结规律的分子动力学研究.
物理学报,2005,54:4245
|
被引
11
次
|
|
|
|
13.
Zhang J M.
Chinese Physics,2005,14:1015
|
被引
12
次
|
|
|
|
14.
乔永红.
物理学报,54:4827
|
被引
1
次
|
|
|
|
15.
Johnson R A.
Phys Rev B,1989,39:12554
|
被引
74
次
|
|
|
|
16.
Honeycutt R W.
Methods in Computational Physics,1970,9:136
|
被引
9
次
|
|
|
|
17.
Ciccotti G.
Phys Rev B,1983,27:5576
|
被引
5
次
|
|
|
|
18.
Honeycutt J D.
J Phys Chem,1987,91:4950
|
被引
238
次
|
|
|
|
|