含钒高强度船体结构钢的连续冷却转变
Effect of finish rolling temperature on the continuous cooling transformation of V-alloyed high strength hull steel
查看参考文献11篇
|
文摘
|
利用热模拟实验机模拟了中板控制轧制工业生产工艺,测定了一种钒微合金化船体结构钢经不同温度多道次变形后的动态CCT曲线,讨论了终轧温度和冷却速度对组织、γ/α相变及CCT曲线的影响. 结果表明:随终轧温度的降低,实验钢的动态CCT曲线整体向左上方移动,获得铁素体+珠光体组织的冷却速度范围变宽;随冷却速度的增加,γ/α相变开始温度Ar3逐渐降低,贝氏体相变开始温度Bs以抛物线形式变化;铁素体晶粒随终轧温度降低或冷速的增加而细化. |
|
其他语种文摘
|
The dynamic continuous cooling transformation (CCT) diagrams of a kind of V-alloyed high strength hull steel were determined by the use of a thermo-simulating machine after multi-pass deformation designed to simulate the industrial controlled rolling procedures for the production of plates at different temperatures. The effects of finish rolling temperature and cooling rate on the microstructure, y/a transformation and CCT diagrams of the hull steel were investigated. The results show that the dynamic CCT diagrams shift to left and upper, and the region of cooling rate to obtain ferrite and pearlite is widened with decreasing finish rolling temperature. With the increase of cooling rate, the onset of y transformation ( Ar3) is lowered gradually, and the bainite start temperature Bs changes in a parabolic way. As the finish rolling temperature decreases or the cooling rate increases, the grains of ferrite are refined. |
|
来源
|
北京科技大学学报
,2006,28(9):830-834 【核心库】
|
|
关键词
|
船体结构钢
;
钒微合金化
;
动态CCT曲线
;
终轧温度
|
|
地址
|
1.
北京科技大学冶金与生态工程学院, 北京, 100083
2.
北京科技大学材料科学与工程学院, 北京, 100083
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-053X |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家教育部高等学校博士学科点专项科研基金
;
国家自然科学基金资助项目
|
|
文献收藏号
|
CSCD:2431976
|
参考文献 共
11
共1页
|
|
1.
徐平光. 高强度低合金中厚钢板的现状与发展.
机械工程材料,2001,25(2):4
|
被引
10
次
|
|
|
|
|
2.
蔡庆伍. 控轧控冷工艺对Nb-V钢的组织性能析出行为的影响.
钢铁,2002,37(3):32
|
被引
9
次
|
|
|
|
|
3.
de Andres C G.
Mater Charact,2002,48:101
|
被引
3
次
|
|
|
|
|
4.
Manohar P A. Continuous cooling transformation behaviour of microalloyed steels containing Ti.
ISIJ Int,1996,36(12):1486
|
被引
24
次
|
|
|
|
|
5.
Manohar P A. Continuous cooling transformation behaviour of high strength microalloyed steels for linepipe applications.
ISIJ Int,1998,38(7):766
|
被引
18
次
|
|
|
|
|
6.
Ouchi C. The effect of hot rolling condition and chemical composition on the onset temperature ofγ/αtransformation after hot rolling.
Trans ISIJ,1982,22:214
|
被引
9
次
|
|
|
|
|
7.
Zhao J C. Continuous cooling transformation kinetics versus isothermal transformation kinetics of steels:a phenomenological rationalization of experimental observations.
Mater Sci Eng,1995,15:135
|
被引
2
次
|
|
|
|
|
8.
Lagneborg R. The role of vanadium in microalloyed steels.
Scand J Metall,1999,28:186
|
被引
28
次
|
|
|
|
|
9.
Mekkawy M F. Effect of finish-rolling temperature on microstructure and strength of V-and Ti-microalloyed steels.
Scand J Metall,1990,19:246
|
被引
3
次
|
|
|
|
|
10.
Medina S F. Static recrystallization of hot deformed austenite and induced precipitation kinetics in vanadium microalloyed steels.
ISIJ Int,1994,34(8):689
|
被引
4
次
|
|
|
|
|
11.
范建文. 细晶强化Q345中板的控轧控冷工艺研究.
轧钢,2003,20(1):11
|
被引
8
次
|
|
|
|
|
了解气象卫星更多信息，请访问