帮助 关于我们

返回检索结果

1m望远镜光电测光用滤光片接口改造
The Reconstruction of Filter-shelf on 1m Telescope

查看参考文献0篇

文摘 云台1m RCC望远镜终端滤光片接口原设计为手动切换,因滤光片远离操作控制设备,使用很不方便.经改造现成为用单片机控制的程控系统,并可由主控计算机经RS232口远程控制.滤光片架改为直流电机驱动,由光电开关定位.系统已于2005年11月23日投入试用.本文给出了实现方法和接口基本数据格式.
其他语种文摘 The interface of filter on 1M Telescope of Yunnan Observatory was controled by the hand before. It was not convenient for use. Now a system controled by a micro process unit is reconstructed. The filter-shelf can also be controled by a remote computer through the interface of RS232. Filter-shelf is drived by a direct current motor and positioned by photoelectricity switch. The system has been operated from 23/11/2005.
来源 天文研究与技术 ,2006,3(3):304-309 【核心库】
关键词 单片机 ; 滤光片架 ; 程控
地址

中国科学院国家天文台云南天文台, 云南, 昆明, 650011

语种 中文
文献类型 研究性论文
ISSN 1672-7673
学科 天文学
文献收藏号 CSCD:2412192

参考文献 共 0

引证文献 1

1 和寿圣 基于ASCOM标准的CCD自动观测系统 天文研究与技术,2013,10(4):386-391
被引 5

显示所有1篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关

iAuthor 链接
伦宝利 0000-0002-1714-2094
版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号