帮助 关于我们

返回检索结果

溶胶凝胶法制备仿生超疏水性薄膜
Preparation of Biomimetic Superhydrophobic Silica Film by Sol-gel Technique

查看参考文献33篇

文摘 通过溶胶-凝胶(Sol-Gel)法和自组装(Self-assembled)制备了具有超疏水性的薄膜,水滴在该薄膜上的平衡静态接触角为155°~157°,滑动角为3°~5°.通过扫描电子显微镜(SEM)观察薄膜微观表面,发现该薄膜表面分布了双层结构(Binary structure)的微纳米粗糙度的微凸体,上表层微米微凸体的平均直径为0.2 μm,下表层纳米微凸体的平均直径约为13 nm,其分布与荷叶表面的结构极其相似.用X射线光电子能谱(XPS)对薄膜表面元素进行了成分分析,结果表明,其表面存在大量的F,Cl等元素,它能显著降低薄膜表面的表面能.薄膜超疏水性的原因可能是,通过硅片经溶胶粒子表面制备的薄膜具有合适的表面粗糙度,再经过全氟辛基三氯甲硅烷(FOTMS)化学修饰后,薄膜表面能进一步降低,这两个条件的有机结合就使得薄膜产生了超疏水性.
其他语种文摘 A superhydrophobic silica film was prepared by means of sol-gel and self-assembly techniques, with a very high water contact angle (155°~157°) and a small sliding angle (3°~5°), making water droplet move readily on the surface. The film surface morphologies were observed with scanning electron microscope, and the elements on surface were determined by X-ray photoelectron spectroscopy. It was found that there were many microconvexities with binary structure uniformly distributed on the surface atop of the film with the average diameter of about 0. 2μm and nanoconvexities on the lower surface layer of the film with the average diameter of about 13 nm, and the film surface structure was similar to that of lotus surface. Many elements such as F and C1 were observed on the film surface, which could make the film surface energy decreased dramatically. The possible reason of leading to superhydrophobic properties on the as-prepared film is due to form an appropriate surface roughness after sol-gel method, and its surface energy will be further decreased after being modified with perfluorooctyltrichloromethoxysilane (FOTMS). These two formed conditions of surface roughness and low surface energy on the film will make the film formed on silicon exhibit good superhydrophobic properties.
来源 化学学报 ,2006,64(8):761-766 【核心库】
关键词 溶胶-凝胶 ; 自组装 ; 薄膜 ; 超疏水 ; 接触角
地址

中国科学院兰州化学物理研究所, 固体润滑国家重点实验室, 兰州, 730000

语种 中文
文献类型 研究性论文
ISSN 0567-7351
学科 物理学;化学工业
基金 国家自然科学基金 ;  中国科学院化学研究所分子科学中心项目
文献收藏号 CSCD:2409897

参考文献 共 33 共2页

1.  Li S H. J Phys Chem B,2002,106:9274 被引 30    
2.  Lei S T. J Am Chem Soc,2003,125:14996 被引 1    
3.  Lau K K S. Nano Lett,2003,3:1701 被引 66    
4.  Guo Z G. J Am Chem Soc,2005,127:15670 被引 44    
5.  Jin M H. Adv Mater,2005,17:1977 被引 33    
6.  Yu X. Adv Mater,2005,17:1289 被引 34    
7.  Shi F. Adv Mater,2005,17:1005 被引 19    
8.  Youngblood J P. J Macromolecules,1999,32:6800 被引 40    
9.  Chen W. J Langmuir,1999,15:2295 被引 1    
10.  Oner D. J Langmuir,2000,16:7777 被引 103    
11.  Miwa M. Langmuir,2000,16:5754 被引 104    
12.  Nakajima A. Langmuir,2000,16:7044 被引 64    
13.  Nakajima A. Adv Mater,1999,11:1365 被引 78    
14.  Scurto A M. Chem Commun,2003:572 被引 14    
15.  Martin T. Chem Commun,2002:24 被引 3    
16.  Mizutani T. Chem Commun,2003:2918 被引 3    
17.  Bhaumik A. Chem Commun,2003:470 被引 4    
18.  Mandal S. Chem Commun,2002:3002 被引 2    
19.  Schmidt D L. Nature,1994,368:39 被引 9    
20.  Abbott N L. Science,1992,257:1380 被引 11    
引证文献 25

1 李松梅 铝合金表面超疏水涂层的制备及其耐蚀性能 物理化学学报,2007,23(10):1631-1636
被引 10

2 李小兵 材料表面润湿性的控制与制备技术 材料工程,2008(4):74-80
被引 20

显示所有25篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

iAuthor 链接
郭志光 0000-0002-4438-3344
周峰 0000-0001-7136-9233
刘维民 0000-0002-8723-2247
版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号