文摘
|
考察了玻璃纤维(GF)增强尼龙66复合材料的摩擦磨损性能,以及PTFE对复合材料摩擦学性能的影响,利用扫描电镜分析了磨损形貌。结果表明:15%GF增强尼龙复合材料的摩擦学性能改善不明显,而且磨损量高于纯尼龙;加入PTFE在摩擦过程中形成了转移膜,降低了玻璃纤维增强尼龙复合材料的摩擦磨损,改善了其摩擦学性能。 |
其他语种文摘
|
Nylon 66 composite specimens were prepared with PTFE filler and glass fiber as the reinforcement The friction and wear behavior of composite material was investigated using an MM-2000 wear tester. The addition of glass fiber did not reduce friction and wear of pure nylon effectively, but friction and wear was reduced when glass fiber was used as reinforcement along with PTFE filler. SEM analysis indicated that filled PTFE was able to form a thin, uniform and continuous transfer film which could increase the wear resistance of nylon composties. |
来源
|
机械工程材料
,2005,29(10):32-33,37 【核心库】
|
关键词
|
尼龙
;
摩擦学性能
;
磨损机理
;
转移膜
|
地址
|
中国科学院兰州化学物理研究所, 固体润滑国家重点实验室, 甘肃, 兰州, 730000
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1000-3738 |
学科
|
一般工业技术 |
文献收藏号
|
CSCD:2179149
|
|
1.
Kakureka S N. The effect of fiber reinforcement on the friction and wear of polyarnide 66 under dry rolling-sliding contact[J].
Tribology Internationa,1999,32:107-116
|
被引
3
次
|
|
|
|
2.
Wang Junxiang. Investigation of the MoS2 filler on the tribological properties of carber fiber reinforced nylon 1010 compsites[J].
Wear,2003,255:774-779
|
被引
15
次
|
|
|
|
3.
Jayashree Bijave. Influence of solid lubricants and fiber reinforcement on wear behavior of PES[J].
Tribology International,2000,33:679-706
|
被引
1
次
|
|
|
|
4.
Anne Bolvari. Wear and friction of aramid fiber and PTFE filled composites[J].
Wear,1997,203:697-702
|
被引
16
次
|
|
|
|
5.
葛世荣. 玻璃纤维增强尼龙1010复合材料的摩擦学性能研究.
摩擦学学报,2000,20:427-430
|
被引
26
次
|
|
|