不锈钢在循环扭转载荷下近门槛值的疲劳裂纹扩展行为
NEAR THRESHOLD FATIGUE CRACK GROWTH BEHAVIOR IN STAINLESS STEEL UNDER CYCLIC TORSION
查看参考文献13篇
文摘
|
研究了带环状预裂纹不锈钢圆棒试样在循环扭转载荷下、门槛值附近的疲劳裂纹扩展行为,用应力强度因子表征了裂纹扩展开始的门槛值.随着裂纹的扩展,裂纹扩展速率由于裂纹面的滑移接触而减小.通过外插裂纹扩展速率与裂纹长度之间的关系,可近似得到裂纹长度为零时无裂纹面滑移接触影响的裂纹扩展速率.施加的应力强度因子范围可分解为推动裂纹扩展的有效值和由于裂纹面的滑移接触而屏蔽掉的两部分.预测了疲劳裂纹的萌生和断裂极限,预测值和实验值相当一致. |
其他语种文摘
|
Near threshold fatigue crack growth tests were conducted under torsion on circum-ferentially pre-cracked round bars of a stainless steel. The crack growth rate was decreased with crack extension because of the sliding contact of the crack faces. The crack growth rate without the influence of crack surface contact was determined by extrapolating the relationship between the crack growth rate and the crack extension to the zero crack length. The applied stress intensity factor range is divided into two parts: one is the effective value responsible for crack growth and the other is the shielding value dissolved by crack surfaces contact, The fatigue limits for crack initiation and fracture were predicted and the predicted values agreed well with the experimental results. |
来源
|
金属学报
,2005,41(7):721-726 【核心库】
|
关键词
|
疲劳裂纹扩展
;
应力强度因子
;
门槛值
;
扭转
|
地址
|
1.
北京航空材料研究院, 北京, 100095
2.
本溪钢铁集团有限责任公司, 辽宁, 本溪, 117100
3.
沈阳重型机械集团有限责任公司
4.
宝钢技术中心, 上海, 201900
5.
名古屋大学工学部, 名古屋
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0412-1961 |
学科
|
金属学与金属工艺 |
文献收藏号
|
CSCD:2107232
|
参考文献 共
13
共1页
|
1.
Pook L P. Int J Fatigue.
Int J Fatigue,1985,7(1):21
|
被引
5
次
|
|
|
|
2.
Yates J R. Fatigue Fract Eng Mater Struct.
Fatigue Fract Eng Mater Struct,1989,12:259
|
被引
3
次
|
|
|
|
3.
Yoshioka S. Trans Jpn Soci Mech Eng.
Trans Jpn Soci Mech Eng,1984,50(453):1267
|
被引
2
次
|
|
|
|
4.
Tschegg E K. Mater Sci Eng.
Mater Sci Eng,1982,54:127
|
被引
2
次
|
|
|
|
5.
Tschegg E K. J Mater Sci.
J Mater Sci,1983,18:1604
|
被引
4
次
|
|
|
|
6.
Yu H C. Fatigue Fract Eng Mater Struct.
Fatigue Fract Eng Mater Struct,1998,21:1067
|
被引
4
次
|
|
|
|
7.
于慧臣. 材料工程.
材料工程,2002(增刊):317
|
被引
4
次
|
|
|
|
8.
于慧臣. 扭转/拉伸复合载荷下的弹塑性疲劳裂纹扩展行为.
航空材料学报,2004,24(5):53
|
被引
3
次
|
|
|
|
9.
于慧臣. 不锈钢在扭转/拉伸复合载荷下的低周疲劳裂纹扩展.
金属学报,2005,41:73
|
被引
4
次
|
|
|
|
10.
Ritchie R O. Metall Trans.
Metall Trans. A,1982,13:101
|
被引
2
次
|
|
|
|
11.
Tada H. The Stress Intensity Factor Handbook.
The Stress Intensity Factor Handbook(2nd ed),1985:27
|
被引
1
次
|
|
|
|
12.
Tanaka K. Fatigue Fract Eng Mater Struct.
Fatigue Fract Eng Mater Struct,1996,19:571
|
被引
4
次
|
|
|
|
13.
Tanaka K. ASTM STP 1359.
ASTM STP 1359,1999:295
|
被引
1
次
|
|
|
|
|