碳颗粒尺寸对自发渗透原位制备TiCp/Mg微观组织的影响
Effect of carbon particle sizes on microstructures of TiCp reinforced magnesium matrix composites by in situ reactive infiltration process
查看参考文献20篇
|
文摘
|
利用原位反应自发渗透技术制备了组织均匀且致密度高的TiCp/Mg复合材料, 研究了原位反应温度以及碳颗粒尺寸对制备的TiCp/Mg复合材料微观组织的影响.结果表明: 当使用大尺寸碳粒子(≤100μm)时, 随着反应温度的提高, 原位生成物TiCp的含量增加, 但有残留反应物Ti和C的存在; 碳粒子尺寸减小(≤30μm)时, 原位反应较完全, 不再有残留物存在; 原位反应产物组织中, 增强相TiCp主要呈互穿网络状、颗粒状以及片状等形态; 增强相的尺寸随碳粒子尺寸的减小而减小, 在碳颗粒尺寸为1.5μm时TiC更易呈现等轴颗粒状, 尺寸约为0.5～2.0μm. |
|
其他语种文摘
|
The highly dense TiCp/Mg composites were fabricated by in situ reaction of (Tip+Cp) preform and spontaneous infiltration of molten Mg into TiCp (in situ reactive infiltration process). The effects of processing temperature and carbon particle size on the microstructures of as-fabricated magnesium matrix composites were investigated. The results show that the amount of product TiCp phase increases with increasing processing temperature by using carbon particle with size of less than 100 fun. However, there are un-reacted Ti and C phases existing within microstructures in this case. When carbon particle size is reduced to some critical size of about 30 fim, the reaction between Ti and C almost completes and no retained Ti and C present. For the microstructures of TiCp/Mg composites, the reinforcement TiC phase has several morphologies, ie interpenetrating network, spheroid-shape and flakeshape, etc. The particle size of the reinforcement TiC decreases with reducing carbon particle size, and there are more 0.5～2.0 fim TiCp with spheroid-like morphology formed when carbon particle size is reduced to 1.5 ftm. |
|
来源
|
中国有色金属学报
,2004,14(4):614-619 【核心库】
|
|
关键词
|
原位反应自发浸渗
;
镁基复合材料
;
碳化钛
;
碳颗粒尺寸
;
显微组织
|
|
地址
|
中国科学院,金属研究所, 沈阳, 110016
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1004-0609 |
|
学科
|
一般工业技术 |
|
基金
|
中国科学院金属研究所新入所骨干人员科研启动基金
;
辽宁省自然科学基金
|
|
文献收藏号
|
CSCD:1648439
|
参考文献 共
20
共1页
|
|
1.
李荣华. 镁基复合材料研究现状与展望.
材料导报,2002,16(8):17-19
|
被引
12
次
|
|
|
|
|
2.
Hryn J N. Magnesium Technology 2001[M].
Warrendale,2001
|
被引
1
次
|
|
|
|
|
3.
Lee D W. Synthesis of nano-structured titanium carbide by Mg-thermal reduction[J].
Scripta Materialia,2003,48:1513-1518
|
被引
2
次
|
|
|
|
|
4.
李劲风. 金属基复合材料(MMCs)的原位制备.
材料科学与工程,2002,20(3):453-456
|
被引
3
次
|
|
|
|
|
5.
Dong Q. Synthesis of TiCp reinforced magnesium matrix composites by in situ reactive infiltration process[J].
Materials Letters,2004,58(6):920-926
|
被引
18
次
|
|
|
|
|
6.
陈礼清. 原位反应渗透法TiCp/Mg复合材料的制备和性能.
材料研究学报,2004,18(2):193-198
|
被引
6
次
|
|
|
|
|
7.
Dong Q. Analysis of in situ reaction and pressureless infiltrating process in fabricating TiC/Mg composites[J].
Journal of Materials Science & Technology,2004,20(1):3-7
|
被引
8
次
|
|
|
|
|
8.
Aghajanian M K. A new infiltration process for the fabrication of metal matrix composites[J].
SAMPE Quarterly,1989,20(4):43-46
|
被引
9
次
|
|
|
|
|
9.
Aghajanian M K. The fabrication of metal matrix composites by a pressureless infiltration technique[J].
J Mater Sci,1991,26:447-454
|
被引
34
次
|
|
|
|
|
10.
Lee K B. Reaction products of Al-Mg/B4C composite fabricated by pressureless infiltration technique[J].
Mater Sci Eng A. A,2001,302:227-234
|
被引
15
次
|
|
|
|
|
11.
Lee K B. Characteristics of AA6061/BN composite fabricated by pressureless infiltration technique[J].
Metall Mater Trans. A,2001,32:1007-1018
|
被引
3
次
|
|
|
|
|
12.
边涛. 金属基复合材料的自发浸渗制备工艺.
材料导报,2002,16(1):21-26
|
被引
14
次
|
|
|
|
|
13.
郝元恺. 纯镁对碳化硼颗粒的常压浸渗.
复合材料学报,1995,12(3):12-16
|
被引
6
次
|
|
|
|
|
14.
Tjong S C. Microstructural and mechanical characteristics of in situ metal matrix composites[J].
Mater Sci Eng R. R,2000,29:49-113
|
被引
124
次
|
|
|
|
|
15.
李青. 无压浸渗法制备B4C／Al复合材料研究.
材料工程,2003(4):17-20
|
被引
15
次
|
|
|
|
|
16.
Srinivasa B. mechanisms and phenomenology[J].
Acta Materialia,2001,49:2373-2385
|
被引
1
次
|
|
|
|
|
17.
Contreras A. Wettability and spreading kinetics of Al and Mg on TiC[J].
Scripta Materialia,2003,48:1625-1630
|
被引
15
次
|
|
|
|
|
18.
Delannay F. Review-the wetting of solids by molten metals and its relation to the preparation of metal-matrix composites[J].
Journal of Materials Science,1987,22:1-16
|
被引
34
次
|
|
|
|
|
19.
Munir Z A. the synthesis of high temperature materials by combustion[J].
Materials Science Reports,1989,3(7/8):227-358
|
被引
1
次
|
|
|
|
|
20.
Lu W J. Growth mechanism of reinforcement in in situ processed (TiB+TiC)/Ti composites[J].
Trans Nonferrous Met Soc China,2001,11(1):67-71
|
被引
7
次
|
|
|
|
|
了解气象卫星更多信息，请访问