|
多环环间混杂复合材料飞轮离心应力分析
ANALYSES OF THE CENTRIFUGAL STRESS OF MULTI-RING INTERMIXING COMPOSITE FLYWHEEL
查看参考文献9篇
文摘
|
采用平面应力假设,给出了计算多环环间混杂复合材料飞轮的离心应力和初始极限转速的方法,并采用二维轴对称的有限元分析验证了计算方法的合理性,可作为初步设计多环环间混杂复合材料飞轮的依据.本文的算例分析还表明,无论单一纤维或混杂的复合材料飞轮,空心结构的初始极限转速和储能密度均高于相应的实心结构的结果;且对于空心结构,有利于通过选择合适的混杂方案,实现一定意义上的"等强度"设计. |
其他语种文摘
|
Based on the hypothesis of plane stress, a method is proposed for calculating the centrifugal stress and initial ultimate rotating speed of the multi-ring intermixing composite flywheel. 2D axisymmetric FEM is used to verify the effectiveness of this method. It can provide the reference for the elementary design of the multi-ring intermixing composite flywheel. The results also show that the initial ultimate rotating speed and energy-storage density of a hollow structural flywheel are both higher than of the solid structural flywheel of whether a single material or an intermixing material. As to hollow structures, it can realize an equal-strength design through the selection of a suitable material sequence. |
来源
|
复合材料学报
,2004,21(4):157-161 【核心库】
|
关键词
|
复合材料飞轮
;
环间混杂
;
离心应力
;
有限元
|
地址
|
1.
中国科学技术大学力学与机械工程系, 材料力学行为和设计重点实验室, 合肥, 230027
2.
中国科学院力学研究所, 北京, 100080
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1000-3851 |
学科
|
一般工业技术 |
基金
|
国家自然科学基金资助项目
|
文献收藏号
|
CSCD:1594116
|
参考文献 共
9
共1页
|
1.
宫能平. 复合材料飞轮的三维应力分析.
复合材料学报,2002,19(1):113-116
|
被引
16
次
|
|
|
|
2.
Lee S Y. Process model [J].
Journal of Composite Materials,1990,24(12):1270-1298
|
被引
15
次
|
|
|
|
3.
Cai Z. Winding and consolidation analysis for cylindrical composite structures [J].
Journal of Composite Materials,1992,26(9):1374-1399
|
被引
11
次
|
|
|
|
4.
秦勇. 复合材料空心飞轮多环套装整体变形及应力简化精细分析.
复合材料学报,2003,20(5):95-99
|
被引
11
次
|
|
|
|
5.
秦勇. 纤维束张紧力缠绕复合材料飞轮的预应力简化分析.
复合材料学报,2003,20(6):87-91
|
被引
11
次
|
|
|
|
6.
秦勇. 计及复合材料飞轮内孔卸载影响的多厚环套装的简化分析[J].
复合材料学报,2004,21(2):117-122
|
被引
5
次
|
|
|
|
7.
Gents G. Theory and Practice of Advanced Flywheel Systems [M].
Kinetic Energy Storage: Theory and Practice of Advanced Flywheel Systems,1985:101-118
|
被引
1
次
|
|
|
|
8.
Tutuncu N. Effect of anisotropy on stresses in rotating discs [J].
International Journal of Mechanical Science,1995,37(8):873-881
|
被引
8
次
|
|
|
|
9.
Sung K H. Optimum design of multiring composite flywheel rotor using a modified generalized plane strain assumption [J].
International Journal of Mechanical Science,2001,43(4):993-1007
|
被引
5
次
|
|
|
|
|
|