|
多元纳米电压敏粉体的烧结力学研究
Kinetics in Sintering Composite Nanopowders for Varistors
查看参考文献8篇
文摘
|
采用溶液胶 - 凝胶方法合成了粉径为20nm的多元纳米电压敏粉体,将纳米粉体用冷等静压成型制备成高密度的坯体,然后对坯体进行高温烧结。分了烧结过程中多元纳米电压敏粉体的晶粒长大的动力学行为。在晶粒形成初期以表面扩散方式传质,通过实验和计算得到多元纳米粉体的晶粒长大的激活能为(364±24)kJ/mol。 |
其他语种文摘
|
The 20 nm composite nanopowders for varistors were prepared by sol-gel method .The samples of higher density were prepared by high-pressure cold-isostatic pressing and sintering at high temperature. The kinetics models of grain formation and grain growth are established. Early in sintering, the grains begin to form while atoms spreading through the powder surfaces. The activation energy obtained through experiment and the calculation for grain growth is (364±24) kJ/mol. |
来源
|
电子元件与材料
,2003,22(10):19-22 【扩展库】
|
关键词
|
纳米粉体
;
电压敏陶瓷
;
烧结动力学
|
地址
|
中国科学院新疆理化技术研究所, 新疆, 乌鲁木齐, 830011
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1001-2028 |
学科
|
电子技术、通信技术 |
基金
|
国家863计划
|
文献收藏号
|
CSCD:1232668
|
参考文献 共
8
共1页
|
1.
Wong J.
J Am Ceram Soc,1974,57:357-359
|
被引
1
次
|
|
|
|
2.
Pedro D.
J Am Ceram Soc,2001,84(8):1661-1667
|
被引
1
次
|
|
|
|
3.
Wong J.
J Appl Phys,1980,51(8):44-53
|
被引
1
次
|
|
|
|
4.
Haberco K.
J Am Ceram Soc,1993,76(1):65-71
|
被引
1
次
|
|
|
|
5.
康雪雅. ZnO压敏陶瓷的晶界结构.
材料研究学报,1996,10(3):301-303
|
被引
3
次
|
|
|
|
6.
Sletson L C.
J Am Ceram Soc,1988,71(11):909-913
|
被引
2
次
|
|
|
|
7.
Kang X Y.
Mater Res Bull,1997,32(9):1165-1171
|
被引
4
次
|
|
|
|
8.
康雪雅. ZnO压敏陶瓷的晶界结构.
材料研究学报,1996,10(3):301-303
|
被引
3
次
|
|
|
|
|
|