帮助 关于我们

返回检索结果

强化处理对Al_2O_3/SiO_2陶瓷型芯高温变形的影响
Influence of Strengthening Treatment on the Deformation of Al_2O_3/SiO_2 Nano-compound Ceramic Core at High Temperature

查看参考文献5篇

赵红亮 1   翁康荣 1   关绍康 1   楼琅洪 2   李英敖 2   赵惠田 2   胡壮麒 2  
文摘 研究了强化处理对Al_2O_3/SiO-2纳米复合陶瓷型芯高温变形的影响规律,结果表明:强化处理对Al_2O_3/SiO_2纳米得合陶次型芯高温变形的影响很大,1550 ℃保温1h的高温挠度由强化前的7mm降至强化后的1mm。强化剂的浓度对陶瓷型芯高温变形的影响不明显,强化次数对陶瓷型芯高温变形的影响相对较大。强化后的陶瓷型芯中出现了莫来石新生片状晶,减少了型芯的高温变形。
其他语种文摘 Influence of strengthening treatment on the deformation of Al_2O_3/SiO_2 nano-compound ceramic core at high temperature was examined. The results showed that the strengthening treatment has great effect on the deformation of Al_2O_3/SiO_2 nano-compound ceramic core at high temperature. The deflection of the ceramic core at 1 550 V. for 1 h dropped from 7 mm to 1 mm before and af-ter being strengthened. Concentration of the strengthening agent has a little effect on the deformation of the ceramic core while the strengthening times has relatively great effect. Lamellar multite crystal microstructure appeared in the fracture surface of strength-ened ceramic core, resulting in the core deformation decrease at high temperature.
来源 特种铸造及有色合金 ,2003,0(5):7-8 【核心库】
关键词 强化 ; 纳米复合陶瓷型芯 ; 高温变形
地址

1. 郑州大学材料科学与工程学院, 郑州, 450002  

2. 中国科学院金属研究所

语种 中文
文献类型 研究性论文
ISSN 1001-2249
学科 一般工业技术
基金 中国博士后科学基金 ;  中国科学院知识创新工程项目
文献收藏号 CSCD:1207092

参考文献 共 5 共1页

1.  田国利. 高效气冷叶片的最新动向. 材料工程,1999(7):2-4 被引 1    
2.  贺靠团. 空心叶片复杂硅基陶瓷型芯的粉料粒度. 材料工程,1992(1):34-36 被引 7    
3.  赵红亮. Al_2O_3/SiO_2纳米复合陶瓷型芯材料的制备与性能. 材料研究学报,2002,16(6):650-654 被引 7    
4.  杨耀武. 强化处理对单晶叶片用氧化铝基陶瓷型芯的影响. 航空材料学报,1995,15(3):33-35 被引 10    
5.  薛明. 单晶空心叶片用AC-2陶瓷型芯的组织和性能研究. 材料工程,2002(4):33-35 被引 14    
引证文献 5

1 徐东阳 钇铝石榴石对氧化铝基陶瓷型芯高温性能的影响 航空材料学报,2011,31(2):67-71
被引 5

2 康海峰 镍基合金空心叶片浇铸用硅基陶瓷型芯的制备及性能 航空材料学报,2013,33(4):1-8
被引 4

显示所有5篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号