帮助 关于我们

返回检索结果

Ni-P化学镀层在动态加载条件下的塑脆转变
Ductile-Brittle Transition of Electroless Ni-P Plating under Dynamic Loading

查看参考文献8篇

黄林国 1   李曙 2   李诗卓 2  
文摘 利用单摆划痕法的动态加载特性,研究了Ni-P化学镀层本身的塑脆转变。镀层的塑脆转变除可采用Lamy建议的塑脆转变深度D'判据外,还提出用新定义的临界法向力Fnc来表征。根据划痕深度d和法向力Fnc的大小,可把镀层在划痕过程中的力学行为分为塑性变形、塑脆转变和脆性断裂三个阶段。分析讨论了磷含量和热处理温度对塑脆转变的影响。
其他语种文摘 Ductile-brittle behaviors of electroless Ni-P plating were studied using a single-pass pendulum scratching tester with dynamic loading. As-defined critical normal force Fnc could be supposed as a new ductile-brittle transition criterion for Ni-P plating besides Lamy's suggestion of ductile-brittle transition depth D', According to the magnitudes of scratching depth a and normal force Fnc, the mechanical behaviors of deposits during grooving could be divided into three steps; ductile deformation, ductile-brittle transition and brittle fracture. Influences of phosphorus content and heat-treatment on ductile-brittle transition were discussed.
来源 材料保护 ,2003,36(6):22-24 【核心库】
关键词 Ni-P化学镀层 ; 塑脆转变 ; 动态加载
地址

1. 台州职业技术学院九峰分院, 浙江, 台州, 318020  

2. 中国科学院金属研究所, 辽宁, 沈阳, 110015

语种 中文
文献类型 研究性论文
ISSN 1001-1560
学科 化学工业
基金 国家自然科学基金
文献收藏号 CSCD:1179521

参考文献 共 8 共1页

1.  Lamy B. Effect of brittle index and sliding speed on the morphology of surface scratching in abrasive or erosive process[J]. Tribology International,1984,17(1):35-35 被引 4    
2.  Lamy B. Brittleness analysis of ceramic and polyneric materials by means of scratching experiments [J]. Journal of Materials Science Letters,1984(3):1069-1070 被引 1    
3.  Lamy B. An analysis of adhesive properties of brittle coating[J]. Journal of Materials Science Letters,1991(10):358-360 被引 1    
4.  刘家浚. 材料磨损原理及其耐磨性[M]. 材料磨损原理及其耐磨性,1993:93 被引 12    
5.  Tope N A. Evaluation of the wear properties of electroless nickel [J]. Plating and Surface Finishing,1976,10(63):30-37 被引 1    
6.  李曙. 单摆冲击划痕法[A]. 第五届全国摩擦学学术会议论文集,1992:579-585 被引 2    
7.  Rabinowicz E. Friction and wear of meterials[M]. Friction and wear of meterials,1965:168 被引 1    
8.  Moore M A. The relationship between the abrasive wear resistance. Wear,1974,28:59-68 被引 10    
引证文献 2

1 黄林国 用单摆冲击划痕法测定膜基界面结合强度 表面技术,2005,34(1):19-21
被引 3

2 柳长磊 TiC增强复合材料在不同条件下的磨损行为 材料研究学报,2007,21(6):664-668
被引 0 次

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号