帮助 关于我们

返回检索结果

热障涂层材料性能和失效机理研究进展
Progress in research on the material properties and failure mechanisms of thermal barrier coatings

查看参考文献80篇

文摘 热障涂层材料破坏由大尺度屈曲和层离机制产生,而这些机制又是微裂纹形核、扩展及相互连通结果的积累。由于特殊制备工艺和使用环境,材料性能涉及到许多特殊机制。近半个世纪的研究,人们对其性能有了充分认识。综述近几年的研究结果,内容包括:热生长氧化现象及其热力学描述;热生长应力与材料失效的联系;材料破坏机理与性能控制参数组织的联系;微缺陷演化产生的材料屈曲和层离所需的能量释放率;破坏准则、服役寿命预计模型和评价标准等。
其他语种文摘 The failure of thermal barrier coatings is controlled by a sequence of events of micro-crack nu-cleation, propagation and coalescence, which accumulate prior to the final failure by large scale bucking and spalling. With special manufacturing approaches and operating environments, several specific mechanisms are involved, which have been well studied in the research in the last half century. This paper reviews the understandings and recent progress related to this field. It includes that thermally grown oxidation and its thermodynamic description, the relationships between grown stresses and material failure mechanisms, the relationship between the interface cracking, governing material properties and microstructure morphological features, the energy release rate in the micro-crack evolution for buckling and spalling of TBCs. The material fracture criteria, and the prediction models of coating life and the systematic approaches to evaluate TBC performance.
来源 力学进展 ,2003,33(4):548-559 【核心库】
关键词 热障涂层 ; 热生长氧化 ; 屈曲 ; 层离 ; 股役寿命 ; 微组织 ; 能量释放率
地址

中国科学院力学研究所, 北京, 100080

语种 中文
文献类型 研究性论文
ISSN 1000-0992
学科 化学工业
基金 国家自然科学基金
文献收藏号 CSCD:1166903

参考文献 共 80 共4页

1.  Schulz U. Some recent trends in research and technology of advanced thermal barrier coatings. Aerospace Science and Technology,2003,7:73-80 被引 75    
2.  Evans A G. Mechanisms Controlling the Durability of Thermal Barrier Coatings. Progress in Materials Science,2001,46:505-555 被引 188    
3.  Miller R A. Oxidation-based model for thermal barrier coating life. J Amev Ceram Soc,1984,67:517-521 被引 19    
4.  Maricocchi A. PVD TBC experience on GE aircraft engines. NASA CP 3312,1995:79-89 被引 1    
5.  Bose S. Thermal barrier coating experience in gas turbine engines at Pratt & Whitney. NASA CP 3312,1995:63-77 被引 1    
6.  DeMasi-Marcin J T. Protective coatings in the gas turbine engine. Surf Coating Tech,1994,68/69:1-9 被引 35    
7.  Hillery R. Coatings for high temperature structural materials. Coatings for high temperature structural materials,1996 被引 1    
8.  Strangman T E. Thermal barrier coatings for turbine airfoils. Thin Solid Films,1985,127:93-105 被引 12    
9.  Mumm D R. Characterization of a cyclic displacement instability for a thermally grown oxide in a thermal barrier system. Acta Mater,2001,49:2329-2340 被引 21    
10.  Wright P K. Mechanisms governing the performance of thermal barrier coatings. Current Opinion in Solid State and Materials Science,1999,4:255-265 被引 23    
11.  Wright P K. Influence of cyclic strain on life of a PVD TBC. Mat Sci Eng. A,1998,245:191-200 被引 15    
12.  Shum D K M. Fundamental solutions for microcracking induced by residual stress. Engr Fract Mech,1990,37:107-117 被引 1    
13.  Eaton H E. Sintering studies of plasma-sprayed zirconia. Surf Coating Tech,1987,32:227-236 被引 2    
14.  Meier S M. Thermal barrier coating life prediction model development. ASME J of Engineering for Gas Turbines and Power,1992,114:258-263 被引 10    
15.  Kingery W D. Introduction to Ceramics. Introduction to Ceramics,1976 被引 39    
16.  Rigney D V. Proc of the Workshop on Thermal Barrier Coatings. Proc of the Workshop on Thermal Barrier Coatings,NASA CR3312,NASA Lewis Research Center,1995:135-150 被引 1    
17.  DeMasi-Marcin J T. Mechanisms of degradation and failure in a plasma deposited thermal battier coating. ASME Paper 89-GT-123,1989 被引 1    
18.  Lee E Y. The effect of bond coat oxidation on the failure of thermal barrier coatings thermal spray industrial applications. Proc of the 7th National Thermal Spray Conference,Boston,Mass,Materials Park,1994:55-59 被引 1    
19.  Fauchais P. Heat. Int J Therm Sci,2000,39:852-870 被引 7    
20.  Busso E P. A mechanistic study of oxidation-induced degradation in a plasma-sprayed thermal barrier coating system. Acta Mater,2001,49:1515-1528 被引 17    
引证文献 17

1 田永生 ZrO2热障涂层研究进展 中国机械工程,2005,16(16):1499-1503
被引 11

2 许宝星 平头压痕试验确定热障涂层弹性模量的方法研究 应用力学学报,2006,23(1):72-75
被引 1

显示所有17篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号