|
|
多作业状态下近海油气管线的力学分析及软件
Strength of Offshore Pipelines in Different Operation States and Analyzing Software
查看参考文献7篇
|
文摘
|
在近海管线的铺设、安装、使用过程中有多种作业状态：在位、悬跨、挖沟、提吊、铺管等。各种状态下管线的受力特点不同，加上管线结构、海况和海底土壤等因素又都很复杂，所以近海管线的强度分析难度大、内容多。分别采用解析方法、数值方法（有限元法、打靶法）和二者结合来解决理论上的（如几何非线性、动边界等）、实用性方面的难点。在理论分析的基础上，编制了符合产业部门工程师使用要求的近海管线强度分析软件。介绍了该软件进行力学分析时采用的理论以及软件界面。 |
|
其他语种文摘
|
Offshore pipelines are indispensable structures during the marine petroleum exploitation. There are manifold operation shales having to do with pipelines such as in situ operation, span, trenching, pipelaying, lifting of pipe/riser, etc. The behavior of pipelines in one state differs greatly from the others. In addition, the structure configuration, the sea severity, and the seabed soil conditions are complex. Therefore, strength analysis of offshore pipelines becomes a rather difficult and onerous task. Presently, there is a lot of technological difficulty in the course of analysis, among which are not only theoretical problems such as geometric non-linearity and moveable boundary, but also practical problems. To tackle the problems, analytical methods, numerical methods such as FEM and shooting method are adopted respectively and jointly. Based on the theoretical research, integrated software named 'Offshore Pipelines Strength Analysis' is developed. This software can carry through strength analysis of pipelines in different operating state, being up to the requirement of engineers. The theoretical background and interface of the software are presented. |
|
来源
|
中国造船
,2002,43(4):45-54 【核心库】
|
|
关键词
|
多作业状态
;
近海油气管线
;
力学分析
;
强度
;
软件
|
|
地址
|
中国科学院力学研究所, 北京, 100080
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1000-4882 |
|
学科
|
石油、天然气工业 |
|
文献收藏号
|
CSCD:1119365
|
参考文献 共
7
共1页
|
|
|
了解气象卫星更多信息，请访问