帮助 关于我们

返回检索结果

H13钢的马氏体/贝氏体组织与性能
M/B Microstructure and Mechanical Properties of H13 Steel

查看参考文献7篇

谢冬柏 1   高飞 2   王福会 1   张倩茹 2  
文摘 利用ET2G型红外测温仪测定了试样的冷却曲线,并利用光学显微镜、扫描电镜以及力学性能试验设备对不同形态的H13钢贝氏体组织和力学性能进行了研究。结果表明,在等温条件下,随等温时间的延长,贝氏体含量增加,低温等温时的增加量远大于高温等温时的增加量;马氏体与贝氏体有一最佳比例,此时复相组织的力学性能最好。
其他语种文摘 The cooling curve of H13 steel sample in air was gotten by infrared thermoscope. And the different microstructures of bainite and the mechanical properties were studied by means of optical microscopy, SEM, and mechanical properties test equipment. The results show that there is more bainite if prolonging the isothermal time and the bainite increases more rapidly at lower isothermal temperature. An appropriate proportion of martensite and bainite in the combined phases can offer the best mechanical properties.
来源 金属热处理 ,2002,27(5):11-14 【核心库】
关键词 H13钢 ; 贝氏体 ; 等温淬火 ; 力学性能
地址

1. 中国科学院金属研究所, 金属腐蚀与防护国家重点试验室, 沈阳, 110016  

2. 大连铁道学院材料科学与工程系, 大连, 116028

语种 中文
文献类型 研究性论文
ISSN 0254-6051
学科 金属学与金属工艺
文献收藏号 CSCD:1035025

参考文献 共 7 共1页

1.  黄细藻. 国外铝和铝合金挤压模具的发展. 模具工业,1988(12):55-59 被引 1    
2.  刘以宽. H13钢铝合金模的研制和使用. 金属热处理,1990(2):51-55 被引 5    
3.  刘以宽. 热作模具的选材及H13钢的应用. 上海金属,1986,8(6):13-20 被引 5    
4.  Hans P Nichlos. Tool Failures from the Perspective of Heat Treatment. Heat treatment,1988(8):25-28 被引 1    
5.  李炯辉. 钢铁材料金相图谱,1981:256 被引 1    
6.  杨永俐. 热处理制度对4Cr5MoSiV1钢显微组织和力学性能的影响. 金属热处理,1990,15(6):28-32 被引 4    
7.  李仁顺. 金属的延迟断裂及防护,1992:124 被引 1    
引证文献 7

1 邹安全 H13钢组织与性能对热锻模使用寿命的影响 中国机械工程,2004,15(24):2248-2251
被引 2

2 林高用 热处理工艺对H13钢组织与性能的影响 热加工工艺,2007,36(4):46-48
被引 10

显示所有7篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号