|
喷射轧制Fe-4.5%Si硅钢片的组织和性能
Microstructure and properties of Fe-4.5wt%Si steel produced by spray forming and rolling
查看参考文献7篇
文摘
|
采用喷射成形和轧制工艺制备了厚度为0.5 mm的Fe-4.5%Si高硅钢片,并对其密度、显微组织和电磁性能进行了测试分析。研究结果表明:在最佳的喷射成形和轧制工艺条件下,所制备硅钢片的磁感应强度B_(25)为1.544 T、B_(50)为1.641 T;铁损P_(10/50)为1.437 W/kg、P_(15/50)为3.43 W/kg,说明喷射成形轧制技术可以制备出高磁感应强度、低铁损的高硅钢片。 |
其他语种文摘
|
Using spray forming and rolling technique, the Fe-4.5wt%Si electrical steel sheet, 0.5 mm of thick, has been produced. The density, microstructure and electromagnetic properties of the sheet had been measured and analyzed. The results show that the electromagnetic properties of the electric steel sheet produced by the technique, 1.544 T(B_(25)) and 1.641 T(B_(50)) of intensity of magnetization, 1.437 W/kg (P_(10/50)) and 3.43 W/kg (P_(15/50)) of iron loss, have been improved. It is concluded that the spray forming and rolling process is a new method of making high guality silicon-electrical steel sheets. |
来源
|
材料科学与工艺
,2002,10(1):55-58 【扩展库】
|
关键词
|
喷射成形
;
硅钢片
;
轧制
;
铁制
;
磁感应强度
|
地址
|
中国科学院金属研究所, 辽宁, 沈阳, 110015
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1005-0299 |
学科
|
冶金工业 |
基金
|
国家863计划
|
文献收藏号
|
CSCD:959409
|
参考文献 共
7
共1页
|
1.
Seifert H. Mechanical properties of Fe-4.5~6.5 wt% Si double roller ribbons.
Materials Science and Engineering A,1991,133:292-296
|
CSCD被引
2
次
|
|
|
|
2.
Inokuti Y. Grain oriented silicon steel sheet with new ceramic films characterized by ultra-low iron loss.
Materials transactions, JIM,1992,33(10):946-952
|
CSCD被引
2
次
|
|
|
|
3.
Okada K. Basic investigation of CVD method for manufacturing 6.5wt.% Si steel sheet.
ISIJ International,1996,36(6):706-713
|
CSCD被引
9
次
|
|
|
|
4.
Fiorillo F. Magnetic losses and mechanical properties of Fe-4 to 7.8 wt.% Si rapidly quenched alloy.
IEEE Transaction on Magnetics,1997,33(5):3802-3804
|
CSCD被引
1
次
|
|
|
|
5.
Grant P S. Spray forming.
Progress in Materials Science,1995,39(1):497-545
|
CSCD被引
73
次
|
|
|
|
6.
杨林. 喷射成形硅钢板坯的工艺研究.
粉末冶金技术,2001,19(6):354-357
|
CSCD被引
1
次
|
|
|
|
7.
何忠治.
电工钢,1996
|
CSCD被引
64
次
|
|
|
|
|
|