合金化元素Sn对镁合金组织与性能影响的研究进展
Research progress in effects of alloying element Sn on microstructures and properties of Mg alloys
查看参考文献106篇
|
文摘
|
纯镁具有密度低、减震性能好、生物相容性好等优点,但是强度低。合金化是调控纯镁组织和性能的重要方法。Sn具有熔点低、与Mg的共晶温度高、在Mg中的固溶度大、化学性质稳定和产量大等特点,适合作为合金化元素。本文综述了合金化元素Sn对镁合金组织与性能的影响,由于Sn元素在固/液界面前沿富集、固溶后降低镁基体锥面与基面位错滑移临界分切应力的比值、固溶后提高基体电位、形成Mg2Sn析出相后阻碍位错和晶界运动、与镁基体构成腐蚀原电池等,可产生晶粒细化、时效硬化和强化、提高塑性、调控腐蚀速率、提高放电效率和放电电位等作用。目前制约Mg-Sn基合金发展的主要问题是时效缓慢、硬度和强度低。未来应发展快速显著时效强化的Mg-Sn基合金、含Sn的高塑性变形镁合金和含Sn的结构-功能镁合金。 |
|
其他语种文摘
|
Pure Mg has advantages of low density,good shock absorption performance and good biocompatibility,but its strength is low.Alloying is an important method to modify microstructure and properties of pure Mg.Sn has characteristics of low melting point,high eutectic temperature with Mg,high solid solubility in Mg,stable chemical properties and large output,which is appropriate to be an alloying element.The effects of alloying element Sn on microstructures and properties of Mg alloys were reviewed in this paper.Sn enriches at the front of the solid-liquid interface,dissolves in Mg matrix,reduces the ratio of critical resolved shear stress value of the pyramidal plane to that of the basal plane,and elevates the electric potential of Mg matrix.Mg2Sn precipitates can hinder dislocation and grain boundary movement,and form galvanic corrosion cells with Mg matrix.Therefore,effects of Sn addition include grain refinement,age hardening and strengthening,improving plasticity,accelerating or reducing corrosion rate,enhancing discharge efficiency and discharge potential.At present,the main problems restricting the development of Mg-Sn alloys are slow aging,low hardness and strength.In the future,endeavors should be made to develop rapidly age-hardenable Mg-Sn alloys with high strengths,wrought Sn-containing Mg alloys with good ductility,and Sn-containing structural-functional Mg alloys. |
|
来源
|
材料工程
,2024,52(9):47-57 【核心库】
|
|
DOI
|
10.11868/j.issn.1001-4381.2023.000478
|
|
关键词
|
镁合金
;
晶粒细化
;
时效硬化
;
腐蚀行为
;
放电性能
|
|
地址
|
1.
北京科技大学材料科学与工程学院, 北京, 100083
2.
辽宁材料实验室材料智能技术研究所, 沈阳, 110004
|
|
语种
|
中文 |
|
文献类型
|
综述型 |
|
ISSN
|
1001-4381 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家自然科学基金面上项目
;
新型结构功能一体化镁合金材料设计
|
|
文献收藏号
|
CSCD:7814477
|
参考文献 共
106
共6页
|
|
1.
丁文江.
镁合金科学与技术,2007
|
CSCD被引
160
次
|
|
|
|
|
2.
Chen X H. Research progress in magnesium alloys as functional materials.
Rare Metal Materials and Engineering,2016,45(9):2269-2274
|
CSCD被引
2
次
|
|
|
|
|
3.
曾小勤. 镁及其合金导热研究进展.
金属学报,2022,58(4):400-411
|
CSCD被引
3
次
|
|
|
|
|
4.
刘艳辉. 镁合金电磁屏蔽性能的研究进展.
材料导报,2022,36(18):20070297
|
CSCD被引
1
次
|
|
|
|
|
5.
Zhang J. Documentation of damping capacity of metallic, ceramic and metal-matrix composite materials.
Journal of Materials Science,1993,28:2395-2404
|
CSCD被引
1
次
|
|
|
|
|
6.
应韬.
纯镁和二元镁合金的导热行为研究,2015
|
CSCD被引
6
次
|
|
|
|
|
7.
Bao J X. Electrochemical properties and discharge performance of Mg-3Sn-xCa alloy as a novel anode for Mg-air battery.
Journal of Alloys and Compounds,2023,934:167849
|
CSCD被引
2
次
|
|
|
|
|
8.
Liu Y H. A novel Mg-Gd-Y-Zn-Cu-Ni alloy with excellent combination of strength and dissolution via peak-aging treatment.
Journal of Magnesium and Alloys,2023,11(2):720-734
|
CSCD被引
5
次
|
|
|
|
|
9.
Zhou Z F. Diffusion research in HCP Mg-Al-Sn ternary alloys.
Calphad-Computer Coupling of Phase Diagrams and Thermochemistry,2020,68:101710
|
CSCD被引
1
次
|
|
|
|
|
10.
Zhang Y H. Interdiffusion and atomic mobility in hcp Mg-Al-Sn alloys.
Journal of Alloys and Compounds,2021,871:159517
|
CSCD被引
2
次
|
|
|
|
|
11.
Zou H H. The effects of yttrium element on microstructure and mechanical properties of Mg-5wt. % Zn-2wt. % Al alloy.
Materials Science and Engineering: A,2005,402:142-148
|
CSCD被引
13
次
|
|
|
|
|
12.
刘红梅.
Mg-5wt%Sn合金固溶时效机理和价电子结构的研究,2007
|
CSCD被引
5
次
|
|
|
|
|
13.
黄正华. 铸态和固溶态Mg-Sn二元合金的组织与力学性能.
材料研究与应用,2014,8(4):221-227
|
CSCD被引
4
次
|
|
|
|
|
14.
Stjohn D H. Grain refinement of magnesium alloys.
Metallurgical and Materials Transactions A,2005,36:1669-1679
|
CSCD被引
109
次
|
|
|
|
|
15.
Deng Y. Eutectic intermetallic formation during solidification of a Mg-Sn-Al-Zn-Mn alloy.
Materials Characterization,2022,186:111807
|
CSCD被引
1
次
|
|
|
|
|
16.
Tong X. Rapid cooling effect during solidification on macro-and micro-segregation of as-cast Mg-Gd alloy.
Progress in Natural Science: Materials International,2021,31(1):68-76
|
CSCD被引
3
次
|
|
|
|
|
17.
Qiu W. Utilization of VN particles for grain refinement and mechanical properties of AZ31 magnesium alloy.
Journal of Alloys and Compounds,2019,781:1150-1158
|
CSCD被引
3
次
|
|
|
|
|
18.
刘楚明.
镁合金相图集,2006
|
CSCD被引
45
次
|
|
|
|
|
19.
Poddar P. Creep behaviour of Mg-8% Sn and Mg-8%Sn3%Al-1%Si alloys.
Materials Science and Engineering: A,2012,545:103-110
|
CSCD被引
8
次
|
|
|
|
|
20.
石章智. 可时效强化Mg-Sn基合金的研究进展.
金属学报,2019,55(10):1231-1242
|
CSCD被引
4
次
|
|
|
|
|
了解气象卫星更多信息，请访问