钛铝金属间化合物激光点火燃烧行为及机理
Laser ignited burning behavior and mechanism of TiAl alloy
查看参考文献32篇
|
文摘
|
采用激光氧浓度实验方法结合超高温红外测温仪和高速摄像机原位观察、扫描电子显微分析和X射线衍射分析等方法,对钛铝金属间化合物(TiAl合金)的点火燃烧行为进行研究,揭示燃烧过程熔体的形成与运动规律、氧化物类型和结构特征,进而探讨燃烧机理。结果表明:TiAl合金发生起燃及持续燃烧的激光功率和氧浓度临界条件分别遵循抛物线规律和抛物线+直线规律,且显著高于近α型高温钛合金,即具有更好的阻燃性能;TiAl合金的起燃温度高于基体相熔点,起燃时基体部分熔化,导致Al元素由内氧化机制转变为外氧化机制;扩展燃烧阶段形成的氧化物由内侧到燃烧表面依次为Al_2O_3,Al_2Ti_7O_(15),Al_2TiO_5和Al_6Ti_2O_(13)相,其中熔凝区内形成的连续网状Al_2O_3层能够阻碍熔体运动,燃烧区内形成的Ti-Al-O三元相通过降低内层Al_2O_3的分解压提升Al_2O_3保护层的稳定性,使TiAl合金具有良好的阻燃性能。 |
|
其他语种文摘
|
The ignition and combustion behaviors of titanium aluminide (TiAl alloy) were studied by using laser oxygen concentration experimental method combined with ultra-high temperature infrared thermometer, high-speed camera in-situ observation, scanning electron microscopy and X-ray diffraction. The formation and movement laws of the molten body, types and structural characteristics during the combustion process were revealed, and the molten body mechanism was further explored. The results show that the critical conditions of laser power and oxgyen concentration for the ignition and sustained burning of TiAl alloy follow parabolic and parabolic+linear laws, respectively, which are significantly higher than those of near α high temperature titanium alloy, indicating the better flame retardant properties of TiAl alloy. The ignition temperature of TiAl alloy is higher than the melting point. During the ignition period, the partial melting of the matrix causes the transition of Al element from internal oxidation to external oxidation. The oxides formed during the sustained burning stage are characterized as Al_2O_3, Al_2Ti_7O_(15), Al_2TiO_5, and Al_6Ti_2O_(13) phases from the inner side to the burning surface. The continuous network Al_2O_3 layer formed in the fusion zone can hinder the movement of the melt. The Ti-Al-O ternary phase formed in the combustion zone can improve the stability of the Al_2O_3 protective layer by reducing the decomposition pressure of Al_2O_3, thus leading to the better flame retardant performance of TiAl alloy. |
|
来源
|
材料工程
,2024,52(5):1-16 【核心库】
|
|
DOI
|
10.11868/j.issn.1001-4381.2023.000566
|
|
关键词
|
TiAl合金
;
激光点火
;
氧化燃烧产物
;
燃烧机理
;
起燃温度
|
|
地址
|
1.
中国航发北京航空材料研究院, 先进钛合金航空科技重点实验室, 北京, 100095
2.
清华大学新材料国际研发中心, 北京, 100084
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-4381 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家自然科学基金“叶企孙”科学基金
;
国家重大科技专项
|
|
文献收藏号
|
CSCD:7723545
|
参考文献 共
32
共2页
|
|
1.
杨锐. 钛铝金属间化合物的进展与挑战.
金属学报,2015,51(2):129-147
|
CSCD被引
84
次
|
|
|
|
|
2.
Dai J J. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review.
Journal of Alloys and Compounds,2016,685:784-798
|
CSCD被引
50
次
|
|
|
|
|
3.
Ouyang P X. Microstructure characteristics after combustion and fireproof mechanism of TiAl-based alloys.
Materials Today Communication,2018,16:364-373
|
CSCD被引
12
次
|
|
|
|
|
4.
Sui N. Burning products of TA15 titanium alloy by friction oxygen concentration method.
Rare Metals,2018,37(11):952-960
|
CSCD被引
4
次
|
|
|
|
|
5.
吴明宇. 600 ℃高温钛合金燃烧组织演变及机理.
物理学报,2023,72(16):166102
|
CSCD被引
3
次
|
|
|
|
|
6.
隋楠. 近α型高温钛合金富氧燃烧组织特征及形成机制研究.
稀有金属材料与工程,2022,51(9):3263-3275
|
CSCD被引
2
次
|
|
|
|
|
7.
弭光宝. TC11钛合金表面阻燃涂层的抗点燃性能及机理研究.
航空材料学报,2019,39(5):94-102
|
CSCD被引
10
次
|
|
|
|
|
8.
梁贤烨. 钛合金高温摩擦着火理论研究.
物理学报,2020,69(21):216101
|
CSCD被引
5
次
|
|
|
|
|
9.
弭光宝. 摩擦点火Ti-V-Cr阻燃钛合金燃烧产物的组织特征.
物理学报,2016,65(5):056103
|
CSCD被引
12
次
|
|
|
|
|
10.
弭光宝. Ti-V-Cr系阻燃钛合金的非等温氧化行为及阻燃性能预测.
材料工程,2016,44(1):1-10
|
CSCD被引
12
次
|
|
|
|
|
11.
Mi G B. Non-isothermal oxidation and ignition prediction of Ti-Cr alloys.
Transactions of Nonferrous Metals Society of China,2012,22(10):2409-2415
|
CSCD被引
15
次
|
|
|
|
|
12.
Mi G B. Frictional ignition of Ti40 fireproof titanium alloys for aero-engine in oxygen-containing media.
Transactions of Nonferrous Metals Society of China,2013,23(8):2270-2275
|
CSCD被引
15
次
|
|
|
|
|
13.
Stoltzfus J S. Burning of CP titanium (grade 2) in oxygen-enriched atmospheres.
13th International Conference on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres,2012:1561
|
CSCD被引
1
次
|
|
|
|
|
14.
Mi G B. Non-isothermal oxidation and ignition prediction of Ti-Cr alloys.
Transactions of Nonferrous Metals Society of China,2012,22(10):2409-2415
|
CSCD被引
15
次
|
|
|
|
|
15.
Leyens C. Influence of microstructure on oxidation behavior of near-alpha titanium alloys.
Materials Science and Technology,1996,15:1326-1331
|
CSCD被引
3
次
|
|
|
|
|
16.
Taniguchi S. Influence of additional elements on the oxidation behavior of TiAl.
Intermetallics,1996,4:S85-S93
|
CSCD被引
10
次
|
|
|
|
|
17.
Wolf J S.
Anisothermal oxidation of titanium and its alloys,1977
|
CSCD被引
2
次
|
|
|
|
|
18.
Appel F. Recent progress in the development of gamma titanium aluminide alloys.
Advanced Engineering Materials,2000,2(11):699-720
|
CSCD被引
66
次
|
|
|
|
|
19.
Leyens C.
Titanium and titanium alloys,2003
|
CSCD被引
60
次
|
|
|
|
|
20.
Ouyang P X. Non-isothermal oxidation behavior and mechanism of a high temperature near-α titanium alloy.
Materials,2018,11(11):2141
|
CSCD被引
5
次
|
|
|
|
|
了解气象卫星更多信息，请访问