Ti-34Nb-4Zr-0.3O合金时效组织调控及其力学性能
Microstructure regulation and mechanical properties of Ti-34Nb-4Zr-0.3O alloys by aging
查看参考文献23篇
|
文摘
|
采用真空电弧熔炼、单相区热锻以及冷轧等技术制备亚稳β型Ti-34Nb-4Zr-0.3O(质量分数/%)合金(TNZO),通过对冷轧态TNZO合金进行250 ℃和300 ℃的低温时效处理,揭示时效温度和时间对ω相析出行为与合金力学性能的影响规律。结果表明:低温时效使ω相呈纳米尺寸析出,导致合金的强度和弹性模量提高。300 ℃时效时,ω相易发生粗化和团聚,使合金的伸长率快速下降和脆化。250 ℃短时时效可使少量ω相弥散析出,使合金具备高强度、低模量、超高弹性和良好塑性的优异综合性能,在航空航天弹性钛合金和医用植入钛合金领域显示了广阔的应用前景。 |
|
其他语种文摘
|
Metastable β type Ti-34Nb-4Zr-0.3O(mass fraction/%)alloy(TNZO)was prepared by vacuum arc melting,single-phase hot forging and cold rolling. The cold-rolled TNZO alloys were aged at low-temperature of 250 ℃ and 300 ℃ in order to reveal the effect of aging temperature and time on the precipitation behavior of ω phase and the mechanical properties of the alloys. The results show that ω phase precipitates in nanometer size as a result of low temperature aging which leads to the increase of strength and elastic modulus of the alloys. ω phase is easy to coarsen and agglomerate when the alloy is aged at 300 ℃,which results in the rapid drop of the elongation and embrittlement of the alloy. Short time aging at 250 ℃ could make the ω phase precipitated dispersedly with small volume fraction,enabling the alloy to have excellent comprehensive properties of high strength,low modulus,ultra-high elasticity and good plasticity and show a broad application prospect in the field of aerospace elastic titanium alloys and medical implant titanium alloys. |
|
来源
|
材料工程
,2024,52(4):102-109 【核心库】
|
|
DOI
|
10.11868/j.issn.1001-4381.2022.000917
|
|
关键词
|
亚稳β钛合金
;
时效
;
ω相
;
力学性能
|
|
地址
|
1.
东南大学材料科学与工程学院, 南京, 211189
2.
东南大学, 江苏省先进金属材料高技术研究重点实验室, 南京, 211189
3.
中国航发北京航空材料研究院, 北京, 100095
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-4381 |
|
学科
|
金属学与金属工艺 |
|
文献收藏号
|
CSCD:7702983
|
参考文献 共
23
共2页
|
|
1.
肖文龙. 高强度高弹性钛合金的研究进展.
航空材料学报,2020,40(3):11-24
|
CSCD被引
9
次
|
|
|
|
|
2.
Banerjee D. Perspectives on titanium science and technology.
Acta Materialia,2013,61(3):844-879
|
CSCD被引
340
次
|
|
|
|
|
3.
Geetha M. Ti based biomaterials,the ultimate choice for orthopaedic implants-a review.
Progress in Materials Science,2009,54(3):397-425
|
CSCD被引
326
次
|
|
|
|
|
4.
肖文龙. 生物医用亚稳β钛合金的研究进展.
材料工程,2023,51(2):52-66
|
CSCD被引
3
次
|
|
|
|
|
5.
朱知寿. 新型高性能钛合金研究与应用.
航空材料学报,2016,36(3):7-12
|
CSCD被引
22
次
|
|
|
|
|
6.
Niwa N. Influence of heat-treatments on the microstructure and mechanical properties of a commercial beta titanium alloy,Ti-13V-11Cr-3Al.
Journal of Japan Institute of Light Metals,2008,42:663-667
|
CSCD被引
1
次
|
|
|
|
|
7.
Santhosh R. Studies on single and duplex aging of metastable beta titanium alloy Ti-15V-3Cr-3Al-3Sn.
Journal of Alloys and Compounds,2014,605:222-229
|
CSCD被引
18
次
|
|
|
|
|
8.
Wang Y. Influence of cold rolling and ageing treatment on microstructure and mechanical properties of Ti-30Nb-5Ta-6Zr alloy.
Journal of the Mechanical Behavior of Biomedical Materials,2013,27:33-42
|
CSCD被引
7
次
|
|
|
|
|
9.
Guo S. A novel metastable Ti-25Nb-2Mo-4Sn alloy with high strength and low Young's modulus.
Metallurgical and Materials Transactions A,2012,43:3447-3451
|
CSCD被引
9
次
|
|
|
|
|
10.
何宝明. 生物医用钛及其合金材料的开发应用进展、市场状况及问题分析.
钛工业进展,2003,20(4):82-87
|
CSCD被引
2
次
|
|
|
|
|
11.
何涛. 近β钛合金中ω相的研究进展.
稀有金属材料与工程,2018,47(2):705-710
|
CSCD被引
4
次
|
|
|
|
|
12.
Li Q. Influence of ω phase precipitation on mechanical performance and corrosion resistance of Ti-Nb-Zr alloy.
Materials & Design,2016,111:421-428
|
CSCD被引
6
次
|
|
|
|
|
13.
张翥.
钛的金属学和热处理,2009
|
CSCD被引
47
次
|
|
|
|
|
14.
Wang Y. Influence of single and double aging treatment on microstructures and mechanical properties of cold rolled Ti-30Nb-5Ta-6Zr alloy.
Materials Science and Technology,2014,30(2):189-195
|
CSCD被引
1
次
|
|
|
|
|
15.
Devaraj A. Experimental evidence of concurrent compositional and structural instabilities leading to ω precipitation in titanium-molybdenum alloys.
Acta Materialia,2012,60(2):596-609
|
CSCD被引
22
次
|
|
|
|
|
16.
Li T. New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys.
Acta Materialia,2016,106:353-366
|
CSCD被引
27
次
|
|
|
|
|
17.
Guo Y. Precipitation behavior of ω phase and ω→α transformation in near β Ti-5Al-5Mo-5V-1Cr-1Fe alloy during aging process.
Metals,2021,11(2):273
|
CSCD被引
2
次
|
|
|
|
|
18.
郭远航.
氧化物弥散强化材料的制备与焊接性能研究,2021
|
CSCD被引
2
次
|
|
|
|
|
19.
潘士伟.
纳米弥散相在含锆铝合金中的析出行为与强化机制,2022
|
CSCD被引
1
次
|
|
|
|
|
20.
陶杰.
材料科学基础,2006
|
CSCD被引
23
次
|
|
|
|
|
了解气象卫星更多信息，请访问