中红外7×1硫化物光纤合束器的设计与制备
Design and Preparation of Mid-infrared 7×1 Sulfide Fiber Combiner
查看参考文献17篇
|
文摘
|
硫化物光纤合束器可以实现对多个中红外光源(2~5 μm)的功率组合和光谱扩展,基于自研As2S3多模光纤,使用低温熔融拉锥技术制备得到7×1中红外光纤合束器,分析了拉锥区域的损耗产生机理,并表征和评估了合束器的传输效率和光束质量。实现了输入光纤合束端与输出光纤的高质量熔接(熔接点损耗低至0.45 dB,抗拉张力超过300 g),合束器平均传输效率约为80%,单通道最高输出功率为4.32 W,表现出了优良的传输特性和功率承载能力。 |
|
其他语种文摘
|
As a core component of a fiber laser system, the fiber combiner not only directly determines the pump and output power of fiber lasers, but also serves as an important guarantee for the safe operation of the all-fiber laser system in a high-power environment. At the same time, the fiber combiner is simple and stable in structure, and not easy to be interfered with by the outside environment. It can realize the expansion of power and spectrum without a lot of optical components and free space optical devices. The fiber combiner that can transmit lights in the mid-infrared band has attracted much attention because of its wide application in national defense, military, scientific research and business. In addition, due to its significant design and preparation difficulties, only a few institutions currently master the relevant technology. As a very important part of mid-infrared photonic devices, it has become a research hotspot in this field all over the world. In this paper, in theory, the optical field distribution of multimode fiber combiner is analyzed and the power loss of several main modes in the fiber core is calculated. The mechanism of loss in the tapering process of fiber combiner is elucidated. The basic criteria of adiabatic tapering and brightness conservation are analyzed in detail, which lays a foundation for the design of high transmission efficiency and good beam quality combiners. Experimentally, starting with the preparation process and key technologies of midinfrared sulfide fiber combiner device, the 7×1 sulfide fiber combiner device with high performance has been successfully developed after solving the key problems of the ordered arrangement, melting tapering, end cutting, homogeneity fusion and end angle polishing. The key performance indexes are tested and analyzed. In terms of testing and characterization, the transmission efficiency, beam quality, structural stability and power damage threshold of the 7×1 mid-infrared sulfide fiber combiner are tested by using mid-infrared light source, detector and beam quality analyzer. The average transmission efficiency of nearly 80%(@4.778 μm) is obtained for different ports of the 7×1 sulfide fiber combiners.When the diameter of the output fiber core is about 350 μm, the best M_(x/y)~2 value of the 7×1 sulfide fiber combiner is 19.63/22.48.The tensile tension at the fusion point is more than 300 g, which is better than similar structures.When the input laser power (@1.976 μm) exceeds 10 W, the maximum output power of the 7×1 sulfide fiber combiner can reach 4.32 W.This paper provides some ideas for the processing of mid-infrared sulfide fiber and the fabrication of fiber combiner devices.On the one hand, mid-infrared fiber as the main body of mid-infrared fiber combiner, its performance largely determines the final performance of the fiber combiner.In recent years, mid-infrared single-mode fiber, multi-mode fiber and mid-infrared doped fiber with low loss have been prepared.However, compared with commercial quartz fiber, the preparation technology of high performance mid-infrared fiber is still immature, which is the main reason limiting the development of midinfrared fiber combiners and other mid-infrared fiber devices.On the other hand, how to optimize the soft glass fiber processing platform and eliminate the influence of preparation process on device performance as much as possible is also a problem to be solved in the future. |
|
来源
|
光子学报
,2023,52(11):1106003 【核心库】
|
|
DOI
|
10.3788/gzxb20235211.1106003
|
|
关键词
|
光纤合束器
;
硫化物光纤
;
中红外波段
;
传输效率
;
光束质量
|
|
地址
|
1.
中国科学院西安光学精密机械研究所, 瞬态光学与光子技术国家重点实验室, 西安, 710119
2.
中国科学院大学, 北京, 100049
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1004-4213 |
|
学科
|
电子技术、通信技术 |
|
基金
|
国家自然科学基金
;
中国科学院青年创新促进会项目
;
陕西省重点研发计划
|
|
文献收藏号
|
CSCD:7630207
|
参考文献 共
17
共1页
|
|
1.
陈子伦. 高功率光纤激光器功率合束器的研究进展(特邀).
红外与激光工程,2018,47(1):0103005
|
CSCD被引
3
次
|
|
|
|
|
2.
程乃俊. 中红外激光器研究进展.
激光与光电子学进展,2022,1(32):1006-1039
|
CSCD被引
1
次
|
|
|
|
|
3.
Gattass R R. Infrared fiber N×1 multimode combiner.
IEEE Photonics Journal,2013,5(5):7100905
|
CSCD被引
3
次
|
|
|
|
|
4.
Klocek P. Infrared fiber optics.
Handbook of Optics,1998,4(4):399-403
|
CSCD被引
1
次
|
|
|
|
|
5.
Annunziato A. Fused optical fiber combiner based on indium fluoride glass: perspectives for mid-IR applications.
Optics Express,2022,30(24):44160-44174
|
CSCD被引
3
次
|
|
|
|
|
6.
Benderov O. Broadband mid-IR chalcogenide fiber couplers.
Applied Optics,2019,58(26):7222-7226
|
CSCD被引
1
次
|
|
|
|
|
7.
郭海涛. 低损耗硫系红外光纤制备及其应用研究进展.
激光与光电子学进展,2019,56(17):170606
|
CSCD被引
4
次
|
|
|
|
|
8.
Churbanov M F. Stability of the optical and mechanical properties of chalcogenide fibers.
Inorganic Materials,2002,38(10):1063-1068
|
CSCD被引
2
次
|
|
|
|
|
9.
Sato S. Multihundred-watt CO laser power delivery through chalcogenide glass fibers.
Applied Physics Letters,1993,62(7):669-671
|
CSCD被引
6
次
|
|
|
|
|
10.
Florea C. Improved laser damage threshold for chalcogenide glasses through surface microstructuring.
SPIE. 46(1),2011:181-213
|
CSCD被引
1
次
|
|
|
|
|
11.
Major K J. Fiber optic coupled quantum cascade infrared laser system for detection of explosive materials on surfaces.
Optics & Laser Technology,2019,119(12):105635-105642
|
CSCD被引
3
次
|
|
|
|
|
12.
Shamir Y. Large-mode-area fused-fiber combiners, with nearly lowest-mode brightness conservation.
Optics Letters,2011,36(15):2874-2876
|
CSCD被引
3
次
|
|
|
|
|
13.
Shamir Y. Spatial beam properties of combined lasers' delivery fibers.
Optics Letters,2012,37(9):1412-1414
|
CSCD被引
7
次
|
|
|
|
|
14.
付敏. 高光束质量3×1光纤功率合束器的研制.
红外与激光工程,2022,51(5):20210354
|
CSCD被引
2
次
|
|
|
|
|
15.
Zhou Hang. All-fiber 7×1 signal combiner for high power fiber lasers.
Applied Optics,2015,54(11):3090-3094
|
CSCD被引
5
次
|
|
|
|
|
16.
Wang Baishi. Review of fabrication techniques for fused fiber components for fiber lasers.
SPIE. 21 (3),2009:26-29
|
CSCD被引
1
次
|
|
|
|
|
17.
Han Lixiang. Direct combining output of fiber coupled laser diodes via fiber combiner with high efficiency and multiple input ports.
Optik,2020,218(11):165268-165275
|
CSCD被引
3
次
|
|
|
|
|
了解气象卫星更多信息，请访问