帮助 关于我们

返回检索结果

融石英表面高质量亚波长光栅结构的飞秒激光加工
High-quality Subwavelength Grating Structures Fabrication on Fused Silica Surfaces by Femtosecond Laser

查看参考文献25篇

文摘 采用钛蓝宝石飞秒激光加工系统在融石英表面诱导表面周期性微纳结构,研究了激光诱导表面周期结构的形成过程以及激光能量密度、脉冲数、光斑大小和脉冲的空间间隔对融石英表面激光诱导表面周期结构的形貌的影响。实验结果表明,飞秒激光在融石英表面可以诱导出周期性的亚波长结构,主要以垂直于激光偏振方向的光栅状结构为主,其周期在百纳米量级且具有更好的可复现性。在激光光斑控制在1 μm附近时,所得到的形貌具有较高的规则性。根据实验结果设计了聚焦高斯光斑低通量的加工方式。所制备的光栅结构具有200~300 nm的周期,平均深度约为300 nm。
其他语种文摘 The "moth eye" micro-nano structure has recently attracted much attentions due to its high potential value in scientific, biomedical, and industrial applications. For example, by manufacturing specific micro-nanostructures on the surface of an optical device, the incident light would be reflected multiple times on its surface, which lets the surface achieve the co-called" light trap effect", reducing the transmission loss caused by Fresnel reflection at the interface. Laser Induced Periodic Surface Structures (LIPSS) provide a robust, flexible, non-contact, simple, and low-cost potential method for the fabrication of large-scale surface micro-nanostructures. As the most frequently used material on optical devices, it is of great significance to study the fabrication of optical micro-nanostructures on fused silica surfaces. In this paper, by using Ti:sapphire femtosecond laser processing system, the general laws of femtosecond laser induced LIPSS morphology on fused silica samples have been studied. Through designed experiments, the effects of different laser fluence and repetition frequency, pulse number, spot size, and pulse spatial interval on the morphology of LIPSS on fused silica surface were studied. We also focus on how to obtain the high-quality LIPSS, which can have a great impact on the final performance of the device. Different fluences were first set in the experiments. It was found that at a laser fluence of 5 J/cm~2, irregularly arranged nanospikes were densely distributed in the crater, and at 7 J/cm~2, ripple-like structures appeared in the center of the crater. After that, as the laser fluence increased, the periodicity increased, accompanied by an increase in proportion. A laser surface plasma interference model is used to explain the relationship between periodicity and laser fluence, which is in good agreement with the observed phenomena. In order to investigate the effect of laser spot size (or the influence aera size of laser spot) on the morphology of LIPSS, diminished laser spot sizes were set to observe the changes. To further reduce the size of laser spot, the concept of threshold effect was adapted. The results show that by the reduction of laser spot size, the LIPSS stripe becomes more regular. A grating-like LIPSS with good quality can be obtained under the 1 μm diameter of laser spot when the laser fluence is set around 3.7 J/cm~2. The effects of pulse number and laser repetition rate on LIPSS were also studied in this work. The results showed that only some defects could be observed on the surface when the pulse number was set to 1. As the pulse number increased, the ripple-like structures gradually appeared, but were irregular. When the pulse number was set to be 10, relatively intact fringes showed up. It is found that the periodicity of the fringes showed a decreasing trend with the increase of the pulse number. It is also found that changing the laser repetition rate alone has no significant impact on the morphology of LIPSS. Considering that laser fabrication is a line scanning process, there is a certain spatial distance between pulses. Therefore, we studied the effect of pulse spatial interval on the morphology of LIPSS. The results showed that when the spatial interval of pulses is similar to the periodicity that the LIPSS structure under current parameter conditions, high-quality, regular, long-range arrayed grating structures can be obtained. Specifically, we adopt the following parameters, 1 μm diameter of laser spot, a scanning speed of 20 μm/s, repetition rate 100 Hz, and laser fluence 4.2 J/cm~2, and a highly regular long range aligned nanograting structure was fabricated, with a period of 200~300 nm and the depth of about 300 nm. The results found in this work may be conducive to promoting the development of surface micro-nano optical structures on fused silica.
来源 光子学报 ,2023,52(7):0752307 【核心库】
DOI 10.3788/gzxb20235207.0752307
关键词 飞秒激光加工 ; 表面形貌 ; 亚波长结构 ; 融石英 ; 周期性结构
地址

中国科学院西安光学精密机械研究所, 西安, 710119

语种 中文
文献类型 研究性论文
ISSN 1004-4213
学科 电子技术、通信技术
基金 国家自然科学基金国家重大科研仪器研制项目 ;  中国科学院重大科研仪器设备研制项目
文献收藏号 CSCD:7549386

参考文献 共 25 共2页

1.  Muller F A. Bio-inspired functional surfaces based on laser-induced periodic surface structures. Materials,2016,9(6):476 CSCD被引 8 次    
2.  Pimpin A. Review on micro-and nanolithography techniques and their applications. Engineering Journal,2011,16:37-56 CSCD被引 1 次    
3.  Seisyan R. Nanolithography in microelectronics: a review. Technical Physics,2011,56:1061-1073 CSCD被引 8 次    
4.  付跃刚. 基于"蛾眼"灵感的抗反射微纳结构表面技术. 飞控与探测,2018,1(2):1-10 CSCD被引 5 次    
5.  Busse L E. Review of antireflective surface structures on laser optics and windows. Applied Optics,2015,54(31):F303-F310 CSCD被引 4 次    
6.  Sugioka K. Ultrafast lasers-reliable tools for advanced materials processing. Light: Science & Applications,2014,3(4):e149 CSCD被引 118 次    
7.  Osellame R. Femtosecond laser microstructuring: an enabling tool for optofluidic lab-on-chips. Laser & Photonics Reviews,2011,5(3):442-463 CSCD被引 19 次    
8.  Lin Z. Femtosecond laser precision engineering: from micron, submicron, to nanoscale. Ultrafast Science,2021,2021:9783514 CSCD被引 17 次    
9.  Bonse J. Femtosecond laser-induced periodic surface structures. Journal of Laser Applications,2012,24(4):042006 CSCD被引 22 次    
10.  Bonse J. Laser-Induced Periodic Surface Structures (LIPSS). Handbook of Laser Micro-and Nano-engineering,2020:1-59 CSCD被引 1 次    
11.  Zhang Y. Femtosecond laser-induced periodic structures: mechanisms, techniques, and applications. Opto-Electronic Science,2022,1(6):220005 CSCD被引 3 次    
12.  Lutey A H A. Towards laser-textured antibacterial surfaces. Scientific Reports,2018,8(1):1-10 CSCD被引 9 次    
13.  Sipe J E. Laser-induced periodic surface structure. I. Theory. Physical Review B,1983,27(2):1141 CSCD被引 60 次    
14.  Liang F. Mechanism of nanograting formation on the surface of fused silica. Optics Express,2012,20(4):4389-4396 CSCD被引 10 次    
15.  Dufft D. Femtosecond laser-induced periodic surface structures revisited: a comparative study on ZnO. Journal of Applied Physics,2009,105(3):034908 CSCD被引 23 次    
16.  Reif J. Ripples revisited: non-classical morphology at the bottom of femtosecond laser ablation craters in transparent dielectrics. Applied Surface Science,2002,197:891-895 CSCD被引 15 次    
17.  Hohm S. Femtosecond laser-induced periodic surface structures on silica. Journal of Applied Physics,2012,112(1):014901 CSCD被引 14 次    
18.  Papadopoulos A. Biomimetic omnidirectional antireflective glass via direct ultrafast laser nanostructuring. Advanced Materials,2019,31(32):1901123 CSCD被引 9 次    
19.  Rudenko A. Spontaneous periodic ordering on the surface and in the bulk of dielectrics irradiated by ultrafast laser: a shared electromagnetic origin. Scientific Reports,2017,7(1):12306 CSCD被引 5 次    
20.  Gnilitskyi I. High-speed manufacturing of highly regular femtosecond laserinduced periodic surface structures: physical origin of regularity. Scientific Reports,2017,7(1):1-11 CSCD被引 11 次    
引证文献 1 篇

1 安豪杰 4H-SiC激光烧蚀的三维分子动力学研究 中国激光,2024,51(20):2002401
CSCD被引 0 次

显示所有1篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护：中国科学院文献情报中心
地址：北京中关村北四环西路33号 邮政编码：100190 联系电话：(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号