帮助 关于我们

返回检索结果

贯入角度对截齿破岩性能与几何排布的影响研究
Influence of penetration angle on rock breaking performance and geometrical arrangement of picks

查看参考文献28篇

肖建成 1,2   卢景景 1,2 *   周辉 1,2   徐福通 1,2   冯春 3  
文摘 截齿贯入角度是双轮铣槽机布齿系统设计中的关键因素之一。基于连续-非连续单元法(CDEM),建立截齿不同角度冲击贯入破岩的数值模型,通过断裂能本构模型实现岩体弹性-损伤-断裂的破裂过程,开展截齿有效角度50º~90º区间内的9组冲击贯入破岩模拟,研究贯入角度对截齿破岩性能的影响规律,讨论贯入角度对截齿几何排布的影响,总结布齿系统的截齿几何排布规律。结果表明,当贯入角度从90º降低到50º时,岩体由张拉-拉剪破裂向剪切-拉剪破裂转变,截齿平均贯入力与破碎程度提高,截齿的跃进式侵入特性的显著性减低;贯入角度为75º~90º的第I类截齿与小于55º的第III类截齿在破岩中起辅助作用,贯入角度为55º~75º的第II类截齿可在岩体内部产生范围较大的水平非贯通裂隙,在布齿系统破碎岩体过程中发挥主要作用;2个第II类截齿先后贯入岩体可较好地破碎截线间的岩体,可构成一类基本破岩单元,多个基本破岩单元按照正弦线形式排布,由此形成了一种布齿系统设计方法。研究成果为完善双轮铣槽机布齿系统设计方法,打破国外在双轮铣槽机布齿系统设计方法上的技术壁垒提供了理论基础。
其他语种文摘 The penetration angle of pick is one of the key factors in the design of tooth arrangement system of double-wheel trench cutter.Based on the continuum-discontinuum element method (CDEM),a numerical model for picks to penetrate the rock at different angles is established,and the elastic-damage-fracture fracture process of rock mass is realized by the fracture energy constitutive model.Nine groups of impact penetration rock breaking simulations are carried out within the pick's effective angle range of 50º to 90º.The influence of penetration angle on the rock breaking performance of pick is studied,and the influence of penetration angle on the geometric arrangement of pick is discussed.The geometric arrangement principle of the pick of the tooth arrangement system is summarized.The results show that when the penetration angle decreases from 90º to 50º,the rock mass changes from tension and tension-shear fracture to shear and tension-shear fracture,the average penetration force and crushing degree of pick increase,and the leaping invasion characteristic of pick decreases significantly.Type I picks with penetration angles of 75º-90ºand type III picks with penetration angles of less than 55º play an auxiliary role in rock breaking,while type II picks with penetration angles of 55º to 75º can produce a wide range of horizontal non-penetrating cracks in the rock mass and play a major role in the process of breaking rock mass in the tooth arrangement system.Two type II picks have successively penetrated into the rock mass between the better broken sections of the rock mass,two type II picks forming the mechanical model of the basic rock breaking unit,and several basic rock breaking units are arranged according to the sinusoidal form,thus forming a design method of tooth arrangement system.The research results provide a theoretical basis for perfecting the design method of the tooth arrangement system of the double-wheel trench cutter and breaking the technical barriers in the design method of the tooth arrangement system of the double-wheel trench cutter abroad.
来源 岩土力学 ,2022,43(12):3372-3384 【核心库】
DOI 10.16285/j.rsm.2022.0067
关键词 双轮铣槽机 ; 冲击破岩机制 ; 布齿系统 ; 贯入角度 ; 连续-非连续单元法(CDEM)
地址

1. 中国科学院武汉岩土力学研究所, 岩土力学与工程国家重点实验室, 湖北, 武汉, 430071  

2. 中国科学院大学, 北京, 100049  

3. 中国科学院力学研究所, 中国科学院流固耦合系统力学重点实验室, 北京, 100190

语种 中文
文献类型 研究性论文
ISSN 1000-7598
学科 建筑科学
基金 国家自然科学基金 ;  中国科学院基础前沿科学研究计划 ;  武汉市知识创新专项-基础研究项目
文献收藏号 CSCD:7377377

参考文献 共 28 共2页

1.  冯晓峰. 液压双轮铣槽机在地下连续墙施工中的应用. 公路交通技术,2012(5):49-53 CSCD被引 1    
2.  丛蔼森. 地下连续墙的设计施工与应用,2000 CSCD被引 12    
3.  陈志敏. 双轮铣槽机锥形铣齿在复杂硬岩地层施工中的改进. 建筑机械化,2016,37(2):63-65 CSCD被引 1    
4.  康凯旋. 双轮铣槽机截齿空间排布的试验研究. 工程机械,2020,51(2):7,24-30 CSCD被引 1    
5.  宋刚. 连续墙铣槽机铣轮优化设计试验研究,2012 CSCD被引 2    
6.  李万莉. 液压双轮铣槽机铣削岩土受力的试验探究. 振动与冲击,2016,35(19):119-124,161 CSCD被引 2    
7.  Rojek Jerzy. Discrete element simulation of rock cutting. International Journal of Rock Mechanics and Mining Sciences,2011,48(6):996-1010 CSCD被引 33    
8.  Su O. Numerical simulation of rock cutting using the discrete element method. International Journal of Rock Mechanics and Mining Sciences,2011,48(3):434-442 CSCD被引 50    
9.  田听雨. 截齿顺次破岩机制的细观数值模拟及截线间距优化研究. 矿冶工程,2018,38(3):30-34 CSCD被引 2    
10.  张鑫. 截齿截割过程中应力叠加效果对截割载荷的影响. 中国工程机械学报,2017,15(2):165-169 CSCD被引 2    
11.  Nishimatsu Y. The mechanics of rock cutting. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts,1972,9(2):261-270 CSCD被引 49    
12.  贺龙. 采煤机截齿截割角度不同对煤岩破碎率的影响分析. 机械管理开发,2021,36(6):120-121 CSCD被引 1    
13.  侯亮. 采煤机截齿安装角度对其受力的影响研究. 煤炭技术,2017,36(4):277-279 CSCD被引 3    
14.  郭汝坤. 岩体强度对牙轮单齿作用下破碎坑的体积及形态影响研究. 岩土力学,2016,37(10):2971-2978 CSCD被引 4    
15.  王杰. 模拟岩石破裂过程的块体单元离散弹簧模型. 岩土力学,2013,34(8):2355-2362 CSCD被引 17    
16.  冯春. 基于CDEM的钻地弹侵彻爆炸全过程数值模拟研究. 振动与冲击,2017,36(13):11-18,26 CSCD被引 14    
17.  郭汝坤. 牙轮钻工作参数与岩体强度对应关系的理论分析与实验研究. 岩土工程学报,2016,38(7):1221-1229 CSCD被引 4    
18.  冯春. 基于连续-非连续单元方法的露天矿三维台阶爆破全过程数值模拟. 爆炸与冲击,2019,39(2):110-120 CSCD被引 16    
19.  陈珺. 高应力硬岩脆性破裂机制与表征方法研究,2019 CSCD被引 2    
20.  余静. 岩石机械破碎规律和破岩机理模型. 煤炭学报,1982(3):10-18 CSCD被引 15    
引证文献 1

1 刘春生 碟盘刀具截割姿态倾角与破岩模式特征 煤炭学报,2024,49(2):1183-1198
CSCD被引 0 次

显示所有1篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号