光学望远镜镜片旋转镀膜修正挡板的仿真设计
Simulation Design of Correction Masks for Optical Telescope Mirrors in Rotating Coating System
查看参考文献26篇
|
文摘
|
目的提高新疆天文台南山观测基地ZZS1800-1/G真空镀膜机的膜厚均匀性指标。方法通过建立旋转行星夹具系统的膜厚分布模型,利用高精度数值计算,基于ZZS1800-1/G真空镀膜机,研究镀膜机结构参数与镜面几何结构对膜厚均匀性的影响,分析蒸发源位置、望远镜镜片参数与修正挡板形状的关系,并进行修正挡板的仿真设计与验证。结果在旋转行星夹具系统中,蒸发源与原点的距离对半径较大的镜面膜厚均匀性的影响最为明显。该距离600 mm以内,在镜面半径小于100 mm时,膜厚均匀性均低于1.7%;镜面半径为600 mm时,膜厚均匀性最佳,为23%。加入修正挡板后,膜厚均匀性理论计算值为0.035%。在镀半径为600 mm的镜片时,为保证均匀性小于1%,修正挡板的加工形变量要控制在2.2%以内。结论加入修正挡板可有效提高ZZS1800-1/G真空镀膜机的膜厚均匀性,本文建立的仿真模型可为ZZS1800-1/G真空镀膜机在实际镀膜工作时修正挡板的设计提供理论参考依据。 |
|
其他语种文摘
|
This paper focuses on researching on the design method of correction masks utilizing for the mirror coating and aims to improve the film thickness uniformity based on ZZS1800-1/G vacuum coating machine, which equipped in Nanshan Station of Xinjiang Astronomical Observatory. By establishing the film thickness distribution model and using high precision numerical calculation, we studied the effects of structural parameters corresponding to ZZS1800-1/G vacuum coating machine and geometry structural parameters corresponding to different mirrors on film thickness uniformity, and analyzed the relevance between the shape of correction mask and the position of evaporate sources, parameters of the mirror, and display the simulation and numerical validation results of correction mask. Results showed that the distance between the evaporation source and the origin was the most obvious influence on the thickness uniformity of the mirror film with larger radius in the rotary planetary fixture system. When the distance was within 600 mm, and the mirror radius was less than 100 mm, and the uniformity of film thickness was less than 1.7%; when the mirror radius was 600 mm, the best uniformity of film thickness was 23%; and the theoretical value of the uniformity was 0.035% after adding correction mask, which shows the necessity of adding correction mask. The deformation of the correction mask needs to be within 2.2% for the purpose of keeping the uniformity less than 1% when the mirror radius was 600 mm. Correction mask can effectively improve the uniformity for ZZS1800-1/G vacuum coating machine, the simulation model proposed in this paper provides theoretical reference for the design of the masks. |
|
来源
|
表面技术
,2022,51(4):342-347 【核心库】
|
|
DOI
|
10.16490/j.cnki.issn.1001-3660.2022.04.036
|
|
关键词
|
真空镀膜
;
蒸发源
;
光学薄膜
;
膜厚均匀性
;
修正挡板
;
数值分析
|
|
地址
|
中国科学院新疆天文台, 乌鲁木齐, 830011
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-3660 |
|
学科
|
物理学 |
|
基金
|
新疆维吾尔自治区自然科学基金
|
|
文献收藏号
|
CSCD:7225779
|
参考文献 共
26
共2页
|
|
1.
熊胜明. 强激光主镜膜厚不均匀性对偏振和光学图像的影响.
强激光与粒子束,1992,4(1):59-64
|
CSCD被引
3
次
|
|
|
|
|
2.
Song Fangfang. A study of variable stars in the open cluster NGC 1582 and its surrounding field.
Research in Astronomy and Astrophysics,2016,16(10):154
|
CSCD被引
5
次
|
|
|
|
|
3.
吴伟. 半球形基底镀膜膜厚均匀性理论分析.
真空科学与技术学报,2014,34(4):320-324
|
CSCD被引
6
次
|
|
|
|
|
4.
Kotlikov E N. Thickness Uniformity of Films Deposited on Rotating Substrates.
Journal of Optical Technology,2009,76(2):100
|
CSCD被引
5
次
|
|
|
|
|
5.
马民. 大口径主镜镜面朝下镀膜支撑优化设计.
科学技术与工程,2020,20(23):9367-9377
|
CSCD被引
1
次
|
|
|
|
|
6.
朱元强. 半球透镜膜厚分布分析.
光学与光电技术,2020,18(1):59-62
|
CSCD被引
3
次
|
|
|
|
|
7.
潘栋梁. 大口径镀膜机膜厚均匀性分析.
应用光学,2001,22(1):33-38
|
CSCD被引
5
次
|
|
|
|
|
8.
高晓生. 行星周转镀膜装置设计.
真空科学与技术学报,2015,35(1):44-48
|
CSCD被引
2
次
|
|
|
|
|
9.
金扬利. 大曲率球形基底表面膜厚均匀性的实现.
真空科学与技术学报,2014,34(4):336-339
|
CSCD被引
4
次
|
|
|
|
|
10.
Oliver J B. Optimization of Deposition Uniformity for Large-Aperture National Ignition Facility Substrates in a Planetary Rotation System.
Applied Optics,2006,45(13):3097-3105
|
CSCD被引
9
次
|
|
|
|
|
11.
Villa F. Correction Masks for Thickness Uniformity in Large-Area Thin Films.
Applied Optics,2000,39(10):1602-1610
|
CSCD被引
13
次
|
|
|
|
|
12.
方明. 平面行星夹具均匀性修正挡板设计方法研究.
真空科学与技术学报,2006,26(4):286-289
|
CSCD被引
9
次
|
|
|
|
|
13.
徐树深. 镀膜装置蒸发源发射形态与膜厚分布.
真空,2010,47(6):23-25
|
CSCD被引
2
次
|
|
|
|
|
14.
徐均琪. 双源共蒸技术制备MgF_2/ZnS复合薄膜的特性.
表面技术,2019,48(2):82-88
|
CSCD被引
2
次
|
|
|
|
|
15.
艾万君. 3.6 m大口径镀膜机膜厚均匀性分析.
光电工程,2011,38(11):73-78
|
CSCD被引
5
次
|
|
|
|
|
16.
程敏. 大口径非球面镀膜均匀性分析与修正挡板设计.
真空科学与技术学报,2017,37(3):250-254
|
CSCD被引
4
次
|
|
|
|
|
17.
勾志勇. 非球面光学设计技术综述.
激光杂志,2006,27(3):1-2
|
CSCD被引
15
次
|
|
|
|
|
18.
董磊. 不同类型蒸发源对平面夹具薄膜均匀性的影响.
强激光与粒子束,2005,17(10):1518-1522
|
CSCD被引
6
次
|
|
|
|
|
19.
伦宝利.
大口径天文光学望远镜主镜镀膜的研究,2013
|
CSCD被引
4
次
|
|
|
|
|
20.
Kelkar P. Deposition and Characterization of Challenging DUV Coatings.
Advances in Thin-Film Coatings for Optical Applications,2008
|
CSCD被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问