帮助 关于我们

返回检索结果

脉动热管水平及小倾角条件下的传热性能
Heat Transfer Performance of Pulsating Heat Pipe in Horizontal Position and Small Inclination Angle

查看参考文献23篇

史维秀 1,2   郭浩然 2   陈红迪 2   潘利生 3 *  
文摘 为了研究脉动热管放置方式对其传热性能的影响,以超纯水作为工质,对水平及倾角为30°放置的脉动热管的传热性能进行研究,用壁面温度振荡性能和传热热阻来描述其传热能力。在不同的放置条件下,着重分析不同加热功率和充液率(35%,50%,70%)对其传热性能的影响。研究表明:水平放置时,充液率为35% 和50% 时脉动热管不能启动,充液率70%时可以启动运行;脉动热管在运行时存在临界热量输入值,倾角为30°时,临界值为60 W,但水平放置条件下临界值为90 W;水平放置下的脉动热管传热热阻在不同加热功率下,显著高于倾角为30°的情况;倾角为30°,充液率为35%时的脉动热管适合在低加热功率范围运行,此时传热热阻要低于充液率为50%的情况,但传热范围很窄,传热极限低;30°倾角时,与充液率35%和50%相比,高充液率70% 的脉动热管整体传热性能最优。
其他语种文摘 In order to study the influence of pulsating heat pipe(PHP)placement mode on the its heat transfer performance,taking the ultra-pure water as working fluid,the heat transfer performance of PHP arranged in the horizontal position and the inclination angle of 30° was studied in this paper. The heat transfer performance is described by wall temperature oscillating performance and heat transfer resistance. Under different placement modes,and the effects of different heat power and filling ratios of 35%,50% and 70% on its heat transfer performance were emphatically analyzed. The research results show that PHP with lower filling ratios of 35% and 50% can't start up in the horizontal position,but it can start up and operate normally with the filling ratio of 70%. There is a critical value of heat input for the pulsating heat pipe in operation,and the critical value is 60 W at the inclination angle of 30° and 90 W in the horizontal position. And it is found that the heat transfer resistance of PHP in the horizontal position at different heat power is significantly higher than that of PHP at 30°inclination angle. The PHP at 30° inclination angle and with 35% filling ratio is available to operate at lower heat power,and its heat transfer resistance is lower than that of PHP with 50% filling ratio,but the disadvantages are the narrow range and the low limit of heat transfer. And the overall heat transfer performance of PHP at 30° inclination angle and with 70% filling ratio is optimal,compared with 35% and 50% filling ratios.
来源 热能动力工程 ,2022,37(4):71-78 【扩展库】
DOI 10.16146/j.cnki.rndlgc.2022.04.010
关键词 脉动热管 ; 水平 ; 小倾角 ; 充液率 ; 传热性能
地址

1. 北京建筑大学, 北京市建筑能源高效综合利用工程技术研究中心, 北京, 100044  

2. 北京建筑大学环境与能源工程学院, 北京, 100044  

3. 中国科学院力学研究所, 高温气体动力学国家重点实验室, 北京, 100190

语种 中文
文献类型 研究性论文
ISSN 1001-2060
学科 能源与动力工程
基金 国家自然科学基金 ;  北京建筑大学市属高校基本科研业务费专项资金
文献收藏号 CSCD:7219163

参考文献 共 23 共2页

1.  Akachi H. Structure of a heat pipe. US Patent No 4921041,1990 CSCD被引 1 次    
2.  Patel V. Channel wise displacement-velocity-frequency analysis in acetone charged multi-turn closed loop pulsating heat pipe. Energy Conversation and Management,2019,195:367-383 CSCD被引 1 次    
3.  Khodami R. Experimental investigation of energy and exergy efficiency of a pulsating heat pipe for chimney heat recovery. Sustainable Energy Technologies and Assessments,2016,16:11-17 CSCD被引 1 次    
4.  Khandekar S. Understanding operational regimes of closed loop pulsating heat pipes: an experimental study. Applied Thermal Engineering,2003,23(6):707-719 CSCD被引 35 次    
5.  Maydanik Y F. Compact cooler for electronics on the basis of a pulsating heat pipe. Applied Thermal Engineering,2009,29:3511-3517 CSCD被引 20 次    
6.  Supirattanakui P. Application of a closed-loop oscillating heat pipe with check valves (CLOHP/CV) on performance enhancement in air conditioning system. Energy Building,2011,43(7):1531-1535 CSCD被引 9 次    
7.  李孝军. 微槽道脉动热管的启动及传热特性. 化工学报,2016,67(6):2263-2270 CSCD被引 12 次    
8.  曹小林. 脉动热管的结构改进及其传热特性的实验研究. 工程热物理学报,2004,25(5):807-809 CSCD被引 29 次    
9.  Dang Chao. Investigation on thermal design of a rack with the pulsating heat pipe for cooling CPUs. Applied Thermal Engineering,2017,110:390-398 CSCD被引 3 次    
10.  Rittidech S. Correlation to predict heat transfer characteristics of a closed-end oscillating heat pipe at normal operating condition. Applied Thermal Engineering,2003,23(4):497-510 CSCD被引 16 次    
11.  Charoensawan P. Thermal performance of horizontal closed-loop oscillating heat pipes. Applied Thermal Engineering,2008,28(5/6):460-466 CSCD被引 12 次    
12.  Srikrishna P. Experimental investigation of flat plate closed loop pulsating heat pipe. Heat and Mass Transfer,2019,55:2637-2649 CSCD被引 2 次    
13.  Shi Saiyan. A study of the heat transfer performance of a pulsating heat pipe with ethanol-based mixtures. Applied Thermal Engineering,2016,102:1219-1227 CSCD被引 4 次    
14.  李雪娇. 低沸点工质板式脉动热管传热特性研究. 工程热物理学报,2014,35(12):2457-2460 CSCD被引 4 次    
15.  杨洪海. 倾斜角及充液率对脉动热管运行性能的影响. 动力工程,2009,29(2):65-68 CSCD被引 1 次    
16.  Jang D S. Thermal performance characteristics of a pulsating heat pipe at various nonuniform heating conditions. International Journal of Heat and Mass Transfer,2018,126(12):855-863 CSCD被引 5 次    
17.  陈曦. 倾角及加热功率对乙烷脉动热管传热性能的影响. 化工学报,2019,70(4):1383-1389 CSCD被引 6 次    
18.  张强. 不等径脉动热管的传热性能研究. 化学工程,2017,45(12):49-57 CSCD被引 1 次    
19.  梁玉辉. 倾角及充液率对并联式脉动热管传热性能的影响. 化工学报,2011,62(S2):46-51 CSCD被引 10 次    
20.  史维秀. 倾角及冷却工况对多通路并联回路板式脉动热管传热性能的影响. 化工学报,2014,65(2):532-537 CSCD被引 6 次    
引证文献 2 篇

1 张东 非对称微通道平板脉动热管的变工况实验研究 华南理工大学学报. 自然科学版,2023,51(8):51-61
CSCD被引 0 次

2 张宇航 常温闭环脉动热管性能影响因素研究综述 制冷学报,2024,45(5):47-62
CSCD被引 0 次

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护：中国科学院文献情报中心
地址：北京中关村北四环西路33号 邮政编码：100190 联系电话：(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号