钛合金/钢异种连接接头组织与性能研究进展
Research progress in microstructure and properties of dissimilar joints of titanium alloy/steel
查看参考文献63篇
|
文摘
|
本文对钛合金/钢的异种接头连接技术的研究现状进行了总结和综述,分析了钛合金/钢直接连接和含中间层连接界面的显微组织特征,重点阐述了添加不同中间层(铜、铜基合金及其他)的钛合金/钢界面产物的形成和演变过程,并归纳了不同中间层与制备工艺的钛合金/钢力学性能,最后总结了制备良好的钛合金/钢接头可以采取的方法与设计思路,并指出该领域未来发展除使用传统方法继续深化现有研究外,可与模拟仿真结合,达成更具深度的认识与实验预测。 |
|
其他语种文摘
|
The study status on the joining of titanium alloy/steel dissimilar joint technology was summarized and reviewed, the microstructure characteristics of titanium alloy/steel direct joining and interlayer joining interface were analyzed.The formation and evolution process of titanium alloy/steel joint interface products with different interlayers(copper,copper-based alloy and others)were emphatically described, and the mechanical properties of titanium alloy/steel with different interlayers and preparation processes were also summarized.Finally, the methods and design ideas that can be adopted for the preparation of good titanium alloy/steel joints were summarized, and it was pointed out that the future development of this field can be combined with simulation in addition to using traditional methods to further the existing research, so as to achieve deeper understanding and experimental prediction. |
|
来源
|
材料工程
,2022,50(5):11-19 【核心库】
|
|
DOI
|
10.11868/j.issn.1001-4381.2021.000206
|
|
关键词
|
钛合金
;
钢
;
连接技术
;
中间层
|
|
地址
|
1.
哈尔滨工程大学烟台研究生院, 山东, 烟台, 264000
2.
哈尔滨工程大学材料科学与化学工程学院, 哈尔滨, 150001
|
|
语种
|
中文 |
|
文献类型
|
综述型 |
|
ISSN
|
1001-4381 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家重点研发计划
;
哈尔滨工程大学中俄联合基金资助项目
|
|
文献收藏号
|
CSCD:7191370
|
参考文献 共
63
共4页
|
|
1.
Guo S. Effect of beam offset on the characteristics of copper/304 stainless steel electron beam welding.
Vacuum,2016,128:205-212
|
CSCD被引
16
次
|
|
|
|
|
2.
Wei J. Current situation and prospects on titanium and its alloy in corrosion protection application.
Light Metals,2007,9:59-63
|
CSCD被引
1
次
|
|
|
|
|
3.
刘彦峰. 基于铜中间层的钛合金与不锈钢的真空扩散焊研究.
兵器材料科学与工程,2017,40(5):10-14
|
CSCD被引
6
次
|
|
|
|
|
4.
张岩.
钛合金/不锈钢异种材料激光焊接头微观组织及力学性能的研究,2019
|
CSCD被引
4
次
|
|
|
|
|
5.
Zhang Y. Nd:YAG laser welding of dissimilar metals of titanium alloy to stainless steel without fil-ler metal based on a hybrid connection mechanism.
Journal of Materials Research and Technology,2020,9(2):1662-1672
|
CSCD被引
2
次
|
|
|
|
|
6.
Khoshnaw F. Pressure assisted bonding process of stainless steel on titanium alloy using powder metallurgy.
Materials Chemistry and Physics,2021,259:124015
|
CSCD被引
1
次
|
|
|
|
|
7.
Ananthakumar K. Plasma assisted diffusion joining of CP-titanium-304L stainless steel: attributes of temperature and time.
Materials Today: Proceedings,2020,33(7):3174-3176
|
CSCD被引
2
次
|
|
|
|
|
8.
Gasior W. Enthalpy of formation of intermetallic phases from Fe-Ni-Ti system. Comparative studies.
Archives of Metallurgy and Materials,2012,57(4):1095-1104
|
CSCD被引
1
次
|
|
|
|
|
9.
赵东升. 钛合金与不锈钢真空热轧连接界面微观结构及性能.
焊接学报,2016,37(12):53-56
|
CSCD被引
3
次
|
|
|
|
|
10.
余超. 采用纯铁中间层热轧钛合金/不锈钢复合板显微结构和性能.
稀有金属材料与工程,2019,48(5):1631-1636
|
CSCD被引
1
次
|
|
|
|
|
11.
Yu C. Microstructural and mechanical properties of hot roll bonded titanium alloy/low carbon steel plate.
Journal of Materials Engineering and Performance,2018,27(4):1664-1672
|
CSCD被引
12
次
|
|
|
|
|
12.
Chu Q L. Interfacial investigation of explosion-welded titanium/steel bimetallic plates.
Journal of Materials Engineering and Performance,2020,29(1):78-86
|
CSCD被引
8
次
|
|
|
|
|
13.
Lazurenko D V. Structu-ral transformations occurring upon explosive welding of alloy steel and high-strength titanium.
Physics of Metals and Me-tallography,2018,119(5):469-476
|
CSCD被引
1
次
|
|
|
|
|
14.
Taran Y V. Residual stresses in a stainless steel-titanium alloy joint made with the explosive technique.
Journal of Physics: Conference Series,2012,340:012105
|
CSCD被引
1
次
|
|
|
|
|
15.
Gao Y D. Two pass laser wel-ding of TC4 titanium alloy and 304 stainless steel using TA2/Q235 composite interlayer.
Materials Letters,2019,255:126521
|
CSCD被引
5
次
|
|
|
|
|
16.
Li S H. High-strength tita-nium alloy/steel butt joint produced via friction stir welding.
Materials Letters,2019,234:155-158
|
CSCD被引
7
次
|
|
|
|
|
17.
Zhang Y. Microstructure and mechanical property improvement in laser-welded TC4 titanium alloy and 301L stainless steel joints without filler metal.
Journal of Materials Engineering and Performance,2019,28(1):140-153
|
CSCD被引
2
次
|
|
|
|
|
18.
Li P. Inhomogeneous interface structure and mechanical properties of rotary friction welded TC4 titanium alloy/316L stainless steel joints.
Journal of Manufacturing Processes,2018,33:54-63
|
CSCD被引
12
次
|
|
|
|
|
19.
Thirunavukarasu G. Exhibition of veiled features in diffusion bonding of titanium alloy and stainless steel via copper.
Metallurgical Research & Technology,2018,115(1):115
|
CSCD被引
2
次
|
|
|
|
|
20.
Pugacheva N B. Microstructure of a laser-welded joint between a chromium-nic-kel steel and a titanium alloy with a copper insert.
Physics of Metals and Metallography,2019,120(8):775-781
|
CSCD被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问