帮助 关于我们

返回检索结果

激光熔覆制备高熵合金涂层耐磨性研究进展
Research progress in wear resistance of high entropy alloy coatings prepared by laser cladding

查看参考文献90篇

姜明明 1,2   孙树峰 1,2 *   王津 1,2   王萍萍 1,2,3   孙晓雨 1,2   邵晶 1,2   刘纪新 3   曹爱霞 3   孙维丽 3   陈希章 4  
文摘 机械零部件的摩擦磨损主要发生在材料表面,约有80%的零件工作失效是由表面磨损造成的。摩擦磨损增加了材料和能量的损耗,降低了可靠性和安全性。使用激光熔覆技术在基体表面制备高熵合金涂层的方法,能够使涂层与基体实现良好的冶金结合,以达到提升表面耐磨性能的目的。影响高熵合金涂层耐磨性的因素主要有涂层材料的力学性能,如硬度、塑性和韧性;熔覆过程中产生的缺陷,如表面粗糙不平、气孔和裂纹;摩擦工况,如高温环境和腐蚀环境。本文分析总结了激光熔覆高熵合金涂层的耐磨性影响因素及强化机制。首先,阐明了激光工艺参数(激光功率、激光扫描速度、光斑直径)和后处理工艺(热处理和轧制)对涂层质量及性能的影响;其次,概述了组元元素选择、高温环境和腐蚀环境对涂层耐磨性的影响;最后,对激光熔覆技术制备高熵合金涂层存在的问题进行归纳分析,并对未来的发展趋势进行了展望,如基于远平衡态的材料设计理论研发新材料、利用电场-磁场协同或激光-超声振动复合等新工艺提升涂层耐磨性等。
其他语种文摘 The friction and wear of mechanical parts mainly occurs on the surface of the material,and about 80%of the failures of parts are caused by surface wear.Friction and wear increase the loss of material and energy,and reduce the reliability and safety.Using laser cladding technology to prepare a high entropy alloy coating on the surface of the substrate can achieve a good metallurgical combination between the coating and the substrate,so as to achieve the purpose of improving surface wear resistance.The main factors affecting the wear resistance of the high entropy alloy coating are the mechanical and physical properties of the coating material (such as hardness,plasticity and toughness),defects generated during the cladding process (such as surface roughness,pores and cracks),friction conditions(such as high temperature environment and corrosive environment).In this paper,the influencing factors and strengthening mechanism of laser cladding high entropy alloy coatings were reviewed and summarized.First of all,the influence of laser process parameters(such as laser power,laser scanning speed,spot diameter)and post-treatment processes(such as heat treatment and rolling)on the quality and performance of the coating were explained.Secondly,the influence of component element selection,high temperature environment and corrosive environment on the wear resistance of the coating was described.Finally,the problems existing in the preparation of high entropy alloy coatings by laser cladding technology were analyzed,and the future development trends were forecasted,such as developing new materials based on far-equilibrium material design theory, using electric field-magnetic field synergy or laser-ultrasonic vibration composite technology to improve the wear resistance of coatings,etc.
来源 材料工程 ,2022,50(3):18-32 【核心库】
DOI 10.11868/j.issn.1001-4381.2021.000605
关键词 激光熔覆 ; 高熵合金 ; 涂层制备 ; 耐磨性 ; 表面强化
地址

1. 青岛理工大学, 山东省激光绿色智能制造技术与装备协同创新中心, 山东, 青岛, 266520  

2. 青岛理工大学, 山东省高校激光绿色智能制造技术重点实验室, 山东, 青岛, 266520  

3. 青岛黄海学院, 山东, 青岛, 266427  

4. 温州大学机电工程学院, 浙江, 温州, 325035

语种 中文
文献类型 综述型
ISSN 1001-4381
学科 金属学与金属工艺
基金 国家教育部高等学校学科创新引智计划项目 ;  国家自然科学基金项目 ;  山东省自然科学基金 ;  山东省重点研发计划项目 ;  青岛西海岸新区2020年度科技源头创新专项项目
文献收藏号 CSCD:7181244

参考文献 共 90 共5页

1.  Yeh J W. Recent progress in high entropy alloys. Annales de Chimie Science des Materiaux,2006,31(6):633-648 CSCD被引 156 次    
2.  Zhang Y. Microstructure and properties of high-entropy alloys. Progress in Materials Science,2014,61:1-93 CSCD被引 562 次    
3.  Yeh J W. Anomalous decrease in X-ray diffraction intensities of Cu-Ni-Al-Co-Cr-Fe-Si alloy systems with multi-principal elements. Materials Chemistry and Physics,2007,103(1):41-46 CSCD被引 54 次    
4.  Zhang Y. Guidelines in predicting phase formation of high-entropy alloys. MRS Communications,2014,4(2):57-62 CSCD被引 40 次    
5.  Zhou Y J. Solid solution alloys of AlCoCrFeNiTi_x with excellent room-temperature mechanical properties. Applied Physics Letters,2007,90(18):253 CSCD被引 10 次    
6.  Shen Q K. Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): Microstructure and mechanical properties. Journal of Materials Science & & Technology,2021,74(15):136-142 CSCD被引 8 次    
7.  Chuang M H. Microstructure and wear behavior of Al_x Co_(1.5) CrFeNi_(1.5) Ti_y high-entropy alloys. Acta Materialia,2011,59(16):6308-6317 CSCD被引 157 次    
8.  Ye Q F. Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating. Applied Surface Science,2017,396:1420-1426 CSCD被引 21 次    
9.  Senkov O N. Mechanical properties of Nb_(25) Mo_(25)Ta_(25) W_(25) and V_(20) Nb_(20) Mo_(20)Ta_(20) W_(20) refractory high entropy alloys. Intermetallics,2011,19(5):698-706 CSCD被引 267 次    
10.  Geng Y. Research status and application of the high-entropy and traditional alloys fabricated via the laser cladding. Progress in Metal Physics,2020,21(1):26-45 CSCD被引 2 次    
11.  Yeh J W. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Advanced Engineering Materials,2004,6(5):299-303 CSCD被引 1138 次    
12.  Miracle D B. A critical review of high entropy alloys and related concepts. Acta Materialia,2017,122:448-511 CSCD被引 495 次    
13.  Dong G K. Effects of annealing temperature on microstructures and tensile properties of a single FCC phase CoCuMnNi high-entropy alloy. Journal of Alloys and Compounds,2020,812:152111 CSCD被引 1 次    
14.  Li Z. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys. Progress in Materials Science,2019,102:296-345 CSCD被引 44 次    
15.  Manzoni A M. New multiphase compositionally complex alloys driven by the high entropy alloy approach. Materials Characterization,2018,147:512-532 CSCD被引 2 次    
16.  Huang S M. Microstructures and properties of in-situ TiC particles reinforced Ni-based composite coatings prepared by plasma spray welding. Ceramics International,2015,41(9):12202-12210 CSCD被引 6 次    
17.  Guo H M. Investigation on wear and damage performance of laser cladding Co-based alloy on single wheel or rail material. Wear,2015,328/329:329-337 CSCD被引 13 次    
18.  Jiang H. Synthesis and characterization of AlCoCrFeNiNb_x high-entropy alloy coatings by laser cladding. Crystals,2019,9(1):56-66 CSCD被引 6 次    
19.  Lei Y W. Microstructure and phase transformations in laser clad Cr_xS_y/Ni coating on H13 steel. Optics & Lasers in Engineering,2015,66:181-186 CSCD被引 12 次    
20.  Zhang M N. Synthesis and characterization of refractory TiZrNbWMo high-entropy alloy coating by laser cladding. Surface and Coatings Technology,2017,311:321-329 CSCD被引 23 次    
引证文献 15 篇

1 韩文鹏 采煤机滑靴激光熔覆铁镍基涂层的抗磨性能 润滑与密封,2022,47(11):82-88
CSCD被引 0 次

2 湛思唯 激光熔覆TiZrHfCrMoW涂层在大气和模拟体液环境下的摩擦磨损行为 表面技术,2023,52(1):29-37
CSCD被引 2 次

显示所有15篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护：中国科学院文献情报中心
地址：北京中关村北四环西路33号 邮政编码：100190 联系电话：(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号