帮助 关于我们

返回检索结果

高熵合金增材制造研究进展
Research progress in high entropy alloys by additive manufacturing

查看参考文献89篇

魏水淼 1   马盼 1 *   季鹏程 1   马永超 2   王灿 1   赵健 1   于治水 1  
文摘 基于不同的高熵合金(high-entropy alloys,HEAs)体系,综述了增材制造高熵合金的最新研究进展,阐述了不同成分高熵合金增材制造的快速凝固微观组织、偏析和析出行为,着重分析了增材制造高熵合金的力学性能、变形及强化机理。指出不同的高熵合金体系应选择适合的增材制造工艺,并且成型质量的影响因素还有待进一步研究,最后提出利用增材制造技术可以研发和制备出具有优异强度-塑性组合的高熵合金。
其他语种文摘 Based on different high-entropy alloys (HEAs)systems,the latest research progress in additive manufactured high-entropy alloys was reviewed.The rapid solidification microstructure, segregation and precipitation behaviors of high-entropy alloys fabricated by additive manufacturing with different compositions were described.Especially,the analysis was focused on the mechanical properties,deformation and strengthening mechanisms.It was pointed out that the appropriate additive manufacturing process should be selected for different high-entropy alloy systems,and the influencing factors of forming quality need to be further studied.Finally,it was proposed that highentropy alloys with both excellent strength and high plasticity can be developed and prepared by additive manufacturing technology.
来源 材料工程 ,2021,49(10):1-17 【核心库】
DOI 10.11868/j.issn.1001-4381.2020.000820
关键词 高熵合金 ; 增材制造 ; 微观组织 ; 强化机理
地址

1. 上海工程技术大学材料工程学院, 上海, 201620  

2. 山推工程机械股份有限公司, 山东, 济宁, 272073

语种 中文
文献类型 综述型
ISSN 1001-4381
学科 金属学与金属工艺
文献收藏号 CSCD:7083367

参考文献 共 89 共5页

1.  Yeh J W. Nanostructured high-entropy alloys with multiple principal elements:novel alloy design concepts and outcomes. Advanced Engineering Materials,2004,6(5):299-303 CSCD被引 1318 次    
2.  Cantor B. Microstructural development in equiatomic multicomponent alloys. Materials Science and Engineering:A,2004,375:213-218 CSCD被引 657 次    
3.  Senkov O N. Refractory high-entropy alloys. Intermetallics,2010,18(9):1758-1765 CSCD被引 233 次    
4.  王峰. MoNbZr高熵合金微观组织的研究. 热加工工艺,2012,41(24):117-120 CSCD被引 2 次    
5.  谭雅琴. 高熵合金强韧化的研究进展. 材料导报,2020,34(5):120-126 CSCD被引 3 次    
6.  陈永星. 高熵合金制备及研究进展. 材料工程,2017,45(11):129-138 CSCD被引 29 次    
7.  Li R. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy:processability,non-equilibrium microstructure and mechanical property. Journal of Alloys and Compounds,2018,746:125-134 CSCD被引 67 次    
8.  Xiang S. Microstructures and mechanical properties of CrMnFeCoNi high entropy alloys fabricated using laser metal deposition technique. Journal of Alloys and Compounds,2019,773:387-392 CSCD被引 17 次    
9.  Chew Y. Microstructure and enhanced strength of laser aided additive manufactured CoCrFeNiMn high entropy alloy. Materials Science and Engineering:A,2019,744:137-144 CSCD被引 30 次    
10.  Gao X. Laser 3Dprinting of CoCrFeMnNi high-entropy alloy. Materials Letters,2019,236:77-80 CSCD被引 11 次    
11.  Qiu Z. Cryogenic deformation mechanism of CrMnFeCoNi high-entropy alloy fabricated by laser additive manufacturing process. International Journal of Lightweight Materials and Manufacture,2018,1(1):33-39 CSCD被引 7 次    
12.  Zhang M. AlCoCuFeNi high-entropy alloy with tailored microstructure and outstanding compressive properties fabricated via selective laser melting with heat treatment. Materials Science and Engineering:A,2019,743:773-784 CSCD被引 18 次    
13.  Chen P. Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying. Journal of Materials Science and Technology,2020,43:40-43 CSCD被引 24 次    
14.  Joseph J. Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys. Materials Science and Engineering:A,2015,633:184-193 CSCD被引 28 次    
15.  Vikram R J. Insights into micro-mechanical response and texture of the additively manufactured eutectic high entropy alloy AlCoCrFeNi2.1. Journal of Alloys and Compounds,2020,827:154034 CSCD被引 15 次    
16.  Galati M. A literature review of powder-based electron beam melting focusing on numerical simulations. Additive Manufacturing,2018,19:1-20 CSCD被引 24 次    
17.  Brif Y. The use of high-entropy alloys in additive manufacturing. Scripta Materialia,2015,99:93-96 CSCD被引 47 次    
18.  Sun Z. Revealing hot tearing mechanism for an additively manufactured high-entropy alloy via selective laser melting. Scripta Materialia,2019,168:129-133 CSCD被引 24 次    
19.  Lin D. Effects of annealing on the structure and mechanical properties of FeCoCrNi high-entropy alloy fabricated viaselective laser melting. Additive Manufacturing,2020,32:101058 CSCD被引 27 次    
20.  Kenel C. 3Dink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy microlattices. Nature Communications,2019,10(1):1-8 CSCD被引 15 次    
引证文献 7 篇

1 魏水淼 选区激光熔化制备AlCoCrFeNi高熵合金的成形性能 金属热处理,2022,47(12):28-35
CSCD被引 4 次

2 张聪 高通量计算与机器学习驱动高熵合金的研究进展 材料工程,2023,51(3):1-16
CSCD被引 8 次

显示所有7篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护：中国科学院文献情报中心
地址：北京中关村北四环西路33号 邮政编码：100190 联系电话：(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号