3D打印技术及其在医疗领域的应用
3Dprinting and its application in the field of medicine
查看参考文献69篇
|
文摘
|
3D打印技术是一种快速兴起的新型数字化制造技术,因具有设计自由、大规模定制以及快速原型制造等优点,在医学、航天、汽车、食品等领域应用前景广阔。随着精准化、个性化医疗需求的增长,3D打印技术逐渐被应用到医疗领域,如植入物制造、诊断平台和药物输送系统等,并成为目前较为前沿的研究领域之一,其个性化定制的特点使得3D打印技术能够根据患者的病情制备相应的医疗产品以帮助患者康复。因此,本文概述了3D打印技术的发展,分类介绍了可用于3D打印的医用材料,以及3D打印技术在医疗领域的应用。但是3D打印的植入物是静态的,无生命的,不能随着内环境的变化进行适应性调整,4D打印可以制造出具有“活性”且结构更为复杂的、与天然组织结构非常相似的工程化组织结构,其继承了3D打印技术优点的同时,弥补了现有3D打印的一些缺陷,未来在医学领域会有更广阔的应用前景。 |
|
其他语种文摘
|
3D printing as an important,fast-growing manufacturing technology is triggering major innovations in many fields,such as medicine,aerospace,automobile and food.The main advantages of 3D printing include design freedom,mass customization,waste minimization,and rapid prototyping,etc.The personalized features enable 3Dprinting to prepare products based on the patient's condition to help the patient recover.With the increasing demand for precision and personalized medicine,3Dprinting is gradually being applied to implant manufacturing,diagnostic platforms and drug delivery systems.Therefore,this article outlines the development of 3Dprinting technology,which introduces medical materials that can be used for 3Dprinting,and the application of 3Dprinting technology in the medical field.Finally,the challenges and development prospects of 3Dprinting technology in the medical field are summarized and discussed. |
|
来源
|
材料工程
,2021,49(6):66-76 【核心库】
|
|
DOI
|
10.11868/j.issn.1001-4381.2019.001042
|
|
关键词
|
3D打印
;
医用材料
;
植入物制造
;
组织工程
;
药物输送
|
|
地址
|
哈尔滨工业大学化工与化学学院, 新能源转换与储存关键材料技术工业和信息化部重点实验室, 哈尔滨, 150001
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-4381 |
|
学科
|
一般工业技术 |
|
基金
|
国家自然科学基金项目
;
中央高校基本科研业务费专项资金
|
|
文献收藏号
|
CSCD:6997246
|
参考文献 共
69
共4页
|
|
1.
Murphy S V. 3Dbioprinting of tissues and organs.
Nature Biotechnology,2014,32(8):773-785
|
CSCD被引
204
次
|
|
|
|
|
2.
Hull C. Rapid prototyping: current technology and future potential.
Rapid Prototyping Journal,1995,1(1):11-19
|
CSCD被引
6
次
|
|
|
|
|
3.
Zein I. Fused deposition modeling of novel scaffold architectures for tissue engineering applications.
Biomaterials,2002,23(4):1169-1185
|
CSCD被引
58
次
|
|
|
|
|
4.
Kolesky D B. 3Dbioprinting of vascularized,heterogeneous cell-laden tissue constructs.
Advanced Materials,2014,26(19):3124-3130
|
CSCD被引
63
次
|
|
|
|
|
5.
Olakanmi E O. A review on selective laser sintering/melting(SLS/SLM)of aluminium alloy powders:processing,microstructure,and properties.
Progress in Materials Science,2015,74:401-477
|
CSCD被引
109
次
|
|
|
|
|
6.
Rill M. Photonic metamaterials by direct laser writing and silver chemical vapour deposition.
Nature Mater,2008,7(7):543-546
|
CSCD被引
13
次
|
|
|
|
|
7.
Hollister S. Porous scaffold design for tissue engineering.
Nature Mater,2005,4(7):518-524
|
CSCD被引
102
次
|
|
|
|
|
8.
Tumbleston J R. Continuous liquid interface production of 3Dobjects.
Science,2015,347(6228):1346-1349
|
CSCD被引
109
次
|
|
|
|
|
9.
Ligon S C. Polymers for 3D printing and customized additive manufacturing.
Chemical Reviews,2017,117(15):10212-10290
|
CSCD被引
76
次
|
|
|
|
|
10.
Macdonald N P. Comparing microfluidic performance of three-dimensional(3D)printing platforms.
Analytical Chemistry,2017,89(7):3858-3866
|
CSCD被引
8
次
|
|
|
|
|
11.
Ren K. Materials for microfluidic chip fabrication.
Accounts of Chemical Research,2013,46(11):2396-2406
|
CSCD被引
15
次
|
|
|
|
|
12.
Langer R. Perspectives and challenges in tissue engineering and regenerative medicine.
Advanced Materials,2009,21(32/33):3235-3236
|
CSCD被引
4
次
|
|
|
|
|
13.
Zhu J. Titanium-based metal-organic frameworks for photocatalytic applications.
Coordination Chemistry Reviews,2018,359:80-101
|
CSCD被引
12
次
|
|
|
|
|
14.
Arabnejad S. Fully porous 3Dprinted titanium femoral stem to reduce stress-shielding following total hip arthroplasty.
Journal of Orthopaedic Research,2017,35(8):1774-1783
|
CSCD被引
23
次
|
|
|
|
|
15.
Zhao S. Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting.
Acta Materialia,2018,150:1-15
|
CSCD被引
23
次
|
|
|
|
|
16.
Moharamzadeh K. Biocompatibility of resin-based dental materials.
Materials,2009,2(2):514-548
|
CSCD被引
5
次
|
|
|
|
|
17.
Tkachenko S. Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications.
Journal of the Mechanical Behavior of Biomedical Materials,2014,39:61-72
|
CSCD被引
3
次
|
|
|
|
|
18.
Shah F A. Long-term osseointegration of 3Dprinted CoCr constructs with an interconnected open-pore architecture prepared by electron beam melting.
Acta Biomaterialia,2016,36:296-309
|
CSCD被引
8
次
|
|
|
|
|
19.
Wang W J. Effects of laser polishing on surface microstructure and corrosion resistance of additive manufactured CoCr alloys.
Applied Surface Science,2018,443:167-175
|
CSCD被引
9
次
|
|
|
|
|
20.
Hallab N J. Interfacial kinetics of titanium-and cobalt-based implant alloys in human serum:metal release and biofilm formation.
Journal of Biomedical Materials Research:Part A,2003,65(3):311-318
|
CSCD被引
5
次
|
|
|
|
|
了解气象卫星更多信息，请访问