可注射海藻酸钠/泊洛沙姆复合水凝胶的制备及药物缓释研究
Preparation of injectable sodium alginate/ poloxamer composite hydrogel for sustained drug release
查看参考文献27篇
文摘
|
泊洛沙姆是一种温敏性合成聚合物,随着温度改变能够实现溶胶-凝胶转变,但其相对分子质量低,水凝胶结构很难长期保持。本研究以泊洛沙姆为基体,通过与海藻酸钠溶液混合制备了温敏性海藻酸钠/泊洛沙姆复合水凝胶(SA/ P407)。通过傅里叶变换红外光谱(FT-IR)、试管倒置法、扫描电子显微镜(SEM)、旋转流变仪和紫外-可见分光光度计(UV-Vis)对海藻酸钠/泊洛沙姆复合水凝胶的结构、温敏性、微观形态、动态黏弹性和体外药物释放性能进行了表征,此外还研究了海藻酸钠/泊洛沙姆复合水凝胶的溶胀性能。结果表明:海藻酸钠/泊洛沙姆复合水凝胶具有温敏性,通过加入海藻酸钠能够降低泊洛沙姆在体温下的成胶浓度(质量分数为6%);通过控制海藻酸钠与泊洛沙姆的质量比,能够使溶胶-凝胶转变温度处于室温与体温(25~37℃)之间,并且缩短凝胶化时间为84 s;海藻酸钠/泊洛沙姆复合水凝胶具有高度孔隙化且孔隙之间相互连通的结构特点,其孔径大小处于20~80μm范围内;随着海藻酸钠添加量的增加,海藻酸钠/泊洛沙姆复合水凝胶的溶胀率逐渐降低;海藻酸钠/泊洛沙姆复合水凝胶对抗癌药物吉西他滨具有缓释作用,药物释放时间可达72 h。海藻酸钠/泊洛沙姆复合水凝胶在可注射药物缓释载体方面具有重要的应用前景。 |
其他语种文摘
|
Poloxamer is a thermo-sensitive synthetic polymer that can achieve sol-gel transition with temperature change,but its relative molecular mass is low,and the hydrogel structure is difficult to maintain for a long time.The thermo-sensitive sodium alginate/poloxamer composite hydrogel(SA/ P407)was synthesized by mixing poloxamer with sodium alginate.The chemical structures, temperature sensitivity,microscopic morphology,dynamic viscoelasticity and in vitro drug release behaviors of sodium alginate/poloxamer composite hydrogels were investigated by FT-IR,test tube inversion,SEM,rheometer and UV-Vis spectroscopy.In addition,the swelling properties of sodium alginate/poloxamer composite hydrogels were also studied.These results show that the sodium alginate/poloxamer composite hydrogel is thermo-sensitive,and the gelation concentration (mass fraction is 6%)of poloxamer at body temperature can be reduced by adding sodium alginate.By controlling the mass ratio of sodium alginate and poloxamer,the sol-gel transition temperature can be kept between room temperature and body temperature (25-37 ℃),and the gelation time can be shortened to 84 s.The sodium alginate/poloxamer composite hydrogel has a structural feature of high porosity and interconnected pores,and its pore size ranges from 20μm to 80μm.With the increase of sodium alginate,the swelling rate of the sodium alginate/poloxamer composite hydrogel is gradually decreased.The sodium alginate/poloxamer composite hydrogel shows sustained release of the anticancer drug gemcitabine,and the drug release time can reach 72 hours.Sodium alginate/ poloxamer composite hydrogel has an important application prospect in the field of injectable carriers for sustained drug release. |
来源
|
材料工程
,2020,48(12):60-67 【核心库】
|
DOI
|
10.11868/j.issn.1001-4381.2020.000283
|
关键词
|
海藻酸钠
;
泊洛沙姆
;
溶胶-凝胶转变
;
药物缓释
|
地址
|
1.
天津科技大学化工与材料学院, 天津, 300457
2.
南京霖厚环保科技有限公司, 南京, 210001
3.
天津理工大学材料科学与工程学院, 天津, 300457
4.
天津科技大学, 天津市制浆造纸重点实验室, 天津, 300457
5.
复旦大学, 聚合物分子工程国家重点实验室, 上海, 200433
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1001-4381 |
学科
|
化学 |
基金
|
2018年度天津市教委科研计划项目
;
天津市海洋资源与化学重点实验室
;
天津市制浆造纸重点实验室开放基金资助项目
;
国家自然科学基金资助项目
|
文献收藏号
|
CSCD:6895608
|
参考文献 共
27
共2页
|
1.
薛诗山. 基于金属离子交联的自修复聚丙烯酸水凝胶.
高分子材料科学与工程,2018,34(7):20-24
|
CSCD被引
2
次
|
|
|
|
2.
Ashraf S. Snapshot of phase transition in thermoresponsive hydrogel PNIPAM:role in drug delivery and tissue engineering.
Macromolecular Research,2016,24(4):297-304
|
CSCD被引
11
次
|
|
|
|
3.
Kim K. Natural polypeptide-based supramolecular nanogels for stable noncovalent encapsulation.
Biomacromolecules,2013,14(10):3515-3522
|
CSCD被引
9
次
|
|
|
|
4.
Vermonden T. Hydrogels for protein delivery.
Chemical Reviews,2012,112(5):2853-2888
|
CSCD被引
33
次
|
|
|
|
5.
Kopecek J. Hydrogels:from soft contact lenses and implants to self-assembled nanomaterials.
Journal of Polymer Science: Part A,2009,47(22):5929-5946
|
CSCD被引
5
次
|
|
|
|
6.
Deng A. Enhanced gelation of chitosan/β-sodium glycerophosphate thermosensitive hydrogel with sodium bicarbonate and biocompatibility evaluated.
Materials Science and Engineering:C,2017,78:1147-1154
|
CSCD被引
3
次
|
|
|
|
7.
Lee P Y. Thermosensitive hydrogel as a Tgf-β1gene delivery vehicle enhances diabetic wound healing.
Pharmaceutical Research,2004,20(12):1995-2000
|
CSCD被引
1
次
|
|
|
|
8.
Qu Y. Injectable and thermosensitive hydrogel and PDLLA electrospun nanofiber membrane composites for guided spinal fusion.
ACS Applied Materials and Interfaces,2018,10(5):4462-4470
|
CSCD被引
5
次
|
|
|
|
9.
Patel P. Thermosensitive hydrogel-based drug delivery system for sustained drug release.
Journal of Polymer Research,2019,26(6):131-142
|
CSCD被引
5
次
|
|
|
|
10.
Jung Y S. Thermo-sensitive injectable hydrogel based on the physical mixing of hyaluronic acid and Pluronic F-127for sustained NSAID delivery.
Carbohydrate Polymers,2016,156:403-408
|
CSCD被引
6
次
|
|
|
|
11.
Xiong X Y. Polymeric nanostructures for drug delivery applications based on pluronic copolymer systems.
Journal of Nanoscience and Nanotechnology,2006,6(9):2638-2650
|
CSCD被引
4
次
|
|
|
|
12.
Park K M. Thermosensitive chitosan-pluronic hydrogel as an injectable cell delivery carrier for cartilage regeneration.
Acta Biomaterialia,2009,5(6):1956-1965
|
CSCD被引
11
次
|
|
|
|
13.
Jeong B. Thermosensitive sol-gel reversible hydrogels.
Advanced Drug Delivery Reviews,2002,54(1):37-51
|
CSCD被引
63
次
|
|
|
|
14.
Mayol L. A novel poloxamers/hyaluronic acid in situforming hydrogel for drug delivery:rheological,mucoadhesive and in vitro release properties.
European Journal of Pharmaceutics and Biopharmaceutics,2008,70(1):199-206
|
CSCD被引
13
次
|
|
|
|
15.
Xu H L. Dual regulations of thermosensitive heparin-poloxamer hydrogel usingε-polylysine:bioadhesivity and controlled KGF release for enhancing wound healing of endometrial injury.
ACS Applied Materials and Interfaces,2017,9(35):2950-2954
|
CSCD被引
1
次
|
|
|
|
16.
Yu Y. Nanostructured lipid carrier-based pH and temperature dual-responsive hydrogel composed of carboxymethyl chitosan and poloxamer for drug delivery.
International Journal of Biological Macromolecules,2018,114:462-469
|
CSCD被引
4
次
|
|
|
|
17.
高存帅. 注射用泊洛沙姆407温敏型原位凝胶的研究进展.
中国动物检疫,2012,29(5):84-87
|
CSCD被引
1
次
|
|
|
|
18.
Montaser A S. pH-thermosensitive hydrogel based on polyvinyl alcohol/sodium alginate/Nisopropyl acrylamide composite for treating re-infected wounds.
International Journal of Biological Macromolecules,2018,11:252-275
|
CSCD被引
1
次
|
|
|
|
19.
Luo X B. Hydroxyapatite-poly(vinyl alcohol)-sodium alginate porous hydrogels with poly(vinyl alcohol) surface layer used for articular cartilage repair.
Materials Science Forum,2016,852:1155-1161
|
CSCD被引
1
次
|
|
|
|
20.
Abd El-Ghaffar M A. pH-sensitive sodium alginate hydrogels for riboflavin controlled release.
Carbohydrate Polymers,2012,89(2):667-675
|
CSCD被引
7
次
|
|
|
|
|