基于薄层单元法的弹体与引信系统螺纹连接模拟参数识别
Identification of Thread Connection Parameters of Projectile-fuze System Based on Thin-layer Element Method
查看参考文献21篇
|
文摘
|
螺纹连接是侵彻弹体与引信体连接的主要形式之一,针对现有动力学数值分析手段无法准确表征螺纹连接问题,提出利用薄层单元模拟螺纹连接的解决方案,并建立基于试验结果对薄层单元材料参数识别的方法。开展管螺纹模态试验研究,分析激励力幅值与螺纹松、紧连接状态对模态频率与频率响应曲线的影响,将薄层单元方法应用于管螺纹仿真计算中。结果表明:螺纹松连接状态相比紧连接状态受非线性因素的影响更大;激励力大小对螺纹松连接的测量结果影响更大;与节点固连建模方式进行比较,采用薄层单元仿真计算之后,模态频率最大误差从26.66%下降到1.35%. |
|
其他语种文摘
|
Thread connection is one of the main forms of connection between penetrating projectile and fuze body. To address the problem that thread connection can not be represented accurately by way of the existing dynamic numerical analysis, a method of simulating the thread connection using thin-layer elements is proposed, and a method for identifying the material parameters of thin-layer element based on test results is established. Modal test of pipe threads was carried out. The influences of the amplitude of excitation force and the loose and tight connection of threads on the modal frequency and frequency response curve are discussed, and the thin-layer element method is used for the simulation calculation of pipe threads. Results show that the state of loose thread connection is much more affected by non-linear factors compeared with tight connection; the magnitude of excitation force exerts greater influence on the measured result of loosely connected threads; the maximum error of modal frequency is reduced from 26.66% to 1.35% by comparing the simulated results of thin-layer element with the fixed nodes. |
|
来源
|
兵工学报
,2020,41(7):1288-1298 【核心库】
|
|
DOI
|
10.3969/j.issn.1000-1093.2020.07.005
|
|
关键词
|
弹体与引信系统
;
薄层单元
;
螺纹连接
;
参数识别
|
|
地址
|
1.
北京理工大学, 爆炸科学与技术国家重点实验室, 北京, 100081
2.
北京系统工程研究所, 北京, 100034
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1000-1093 |
|
学科
|
武器工业 |
|
文献收藏号
|
CSCD:6787712
|
参考文献 共
21
共2页
|
|
1.
Ibrahim R A. Uncertainties and dynamic problems of bolted joints and other fasteners.
Journal of Sound and Vibration,2005,279(3):857-936
|
CSCD被引
68
次
|
|
|
|
|
2.
Mackerle J. Finite element analysis of fastening and joining: a bibliography (1990-2002).
International Journal of Pressure Vessels and Piping,2003,80(4):253-271
|
CSCD被引
9
次
|
|
|
|
|
3.
Chaaban A. Finite element analysis of residual stresses in threaded end closures.
Journal of Pressure Vessel Technology,1991,113(3):398-401
|
CSCD被引
3
次
|
|
|
|
|
4.
Chen J J. A study of the helical effect on the thread connection by three dimensional finite element analysis.
Nuclear Engineering and Design,1999,191(2):109-116
|
CSCD被引
17
次
|
|
|
|
|
5.
Zhang D M. Study on collision of threaded connection during impact.
International Journal of Impact Engineering,2017,106:133-145
|
CSCD被引
7
次
|
|
|
|
|
6.
Brutti C. Dynamic behaviour of tubular threaded joints.
Proceedings of the 2nd International Offshore and Polar Engineering Conference,1992:306-311
|
CSCD被引
1
次
|
|
|
|
|
7.
Desai C S. Thin-layer element for interfaces and joints.
International Journal for Numerical and Analytical Methods in Geomech,1984,8(1):19-43
|
CSCD被引
131
次
|
|
|
|
|
8.
Bograd S. Modeling the dynamics of mechanical joints.
Mechanical Systems and Signal Processing,2011,25(8):2801-2826
|
CSCD被引
42
次
|
|
|
|
|
9.
Iranzad M. Identification of nonlinear bolted lap joint models.
Computers & Structures,2012,96/97:1-8
|
CSCD被引
22
次
|
|
|
|
|
10.
姜东. 基于各向同性本构关系薄层单元的螺栓连接参数识别.
振动与冲击,2014,33(22):35-40
|
CSCD被引
12
次
|
|
|
|
|
11.
Zhao G. Prediction of contact stiffness in bolted interface with natural frequency experiment and FE analysis.
Tribology International,2018,127:157-164
|
CSCD被引
14
次
|
|
|
|
|
12.
Adel F. A model updating method for hybrid composite/aluminum bolted joints using modal test data.
Journal of Sound and Vibration,2017,396:172-185
|
CSCD被引
13
次
|
|
|
|
|
13.
Lothar G. Finite element simulation and experiments on rotor damping assembled by disc shrink fits.
Mechanical Systems and Signal Processing,2019,127:412-422
|
CSCD被引
2
次
|
|
|
|
|
14.
Alamdari M M. Nonlinear joint model updating in assembled structures.
Journal of Engineering Mechanics,2013,140(7):04014042
|
CSCD被引
2
次
|
|
|
|
|
15.
田晶. 边界条件模拟方法对模态分析影响的研究.
科学技术与工程,2013,13(34):10417-10420
|
CSCD被引
2
次
|
|
|
|
|
16.
Ion C M. A method for an accurate estimation of natural frequencies using swept-sine acoustic excitation.
Mechanical Systems and Signal Processing,2019,116:693-709
|
CSCD被引
1
次
|
|
|
|
|
17.
Shokrollahi S. Finite element model updating of bolted lap joints implementing identification of joint affected region parameters.
Journal of Theoretical and Applied Vibration and Acoustics,2016,2(1):65-78
|
CSCD被引
6
次
|
|
|
|
|
18.
Narayanaswamy O S. Processing nonlinear multipoint constraints in the finite element method.
International Journal for Numerical Methods in Engineering,1985,21(7):1283-1288
|
CSCD被引
1
次
|
|
|
|
|
19.
Meghlat E M. A new approach to model nailed and screwed timber joints using the finite element method.
Construction and Building Materials,2013,41:263-269
|
CSCD被引
6
次
|
|
|
|
|
20.
Zhang Y Q. The application of contact element in finite element analysis.
Applied Mechanics and Materials,2013,422:100-104
|
CSCD被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问