碳纳米材料改性TiAl基合金技术发展现状及展望
Current situation and prospect of TiAl-based alloy modified by carbon nanomaterials
查看参考文献71篇
|
文摘
|
碳纳米材料具有低密度、高强度、高弹性模量和优异的导电、导热性能,是改性TiAl基合金的一种理想增强相。本文综述碳纳米纤维、碳纳米管和石墨烯等碳纳米材料改性TiAl基合金成形及表面改性技术的研究进展,介绍材料因素和工艺条件对界面组织结构和机械性能的影响,总结碳纳米材料处理TiAl基合金的强化机理。石墨烯改性TiAl基合金制备技术是未来研究的重点发展方向,石墨烯在TiAl基合金基体中的均匀分散技术、界面反应控制和作用机理等关键问题是该技术研究领域的难点。 |
|
其他语种文摘
|
Carbon nanomaterials with low density, high strength, high elastic modulus, excellent conductivity and thermal conductivity are the ideal reinforcing phases for TiAl-based alloy.In this paper, the preparation and surface treatment methods of TiAl-based alloy modified by carbon nanofibers, carbon nanotubes and graphene are reviewed.The influence of material and processing on the interface structure and mechanical properties are introduced, and strengthening mechanisms are also summarized.The preparation technology of graphene modified TiAl-based alloy will be the key development direction of future research.The key problems of graphene uniform dispersion technology, interface reaction control and action mechanism in TiAl- based alloy matrix are the difficulties in the research field of this technology. |
|
来源
|
航空材料学报
,2020,40(3):45-62 【核心库】
|
|
DOI
|
10.11868/j.issn.1005-5053.2020.000070
|
|
关键词
|
石墨烯
;
碳纳米管
;
TiAl基合金
;
制备技术
;
界面结构
;
强化机理
|
|
地址
|
1.
清华大学新材料国际研发中心, 北京, 100084
2.
中国航发北京航空材料研究院钛合金研究所, 北京, 100095
3.
北京市石墨烯及应用工程技术研究中心, 北京市石墨烯及应用工程技术研究中心, 北京, 100094
|
|
语种
|
中文 |
|
文献类型
|
综述型 |
|
ISSN
|
1005-5053 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家自然科学基金
;
中国航发自主创新专项资金项目
|
|
文献收藏号
|
CSCD:6741252
|
参考文献 共
71
共4页
|
|
1.
黄伯云.
钛铝金属间化合物,1998
|
CSCD被引
5
次
|
|
|
|
|
2.
Yamaguchi M. High-temperature structural intermetallics.
Acta Materialia,2000,48(1):307-322
|
CSCD被引
108
次
|
|
|
|
|
3.
Nieto A. Graphene reinforced metal and ceramic matrix composites:a review.
International Materials Reviews,2016,62(5):241-302
|
CSCD被引
29
次
|
|
|
|
|
4.
Kumar S. Fibers from polypropylene/nano carbon fiber composites.
Polymer,2002,43(5):1701-1703
|
CSCD被引
22
次
|
|
|
|
|
5.
Yang Z W. Interfacial structure and fracture behavior of TiB whisker-reinforced C/SiC composite and TiAl joints brazed with Ti-Ni-B brazing alloy.
Materials Science & Engineering: A,2012,532:471-475
|
CSCD被引
7
次
|
|
|
|
|
6.
Feng G J. Microstructure evolution and formation mechanism of laser-ignited SHS joining between C_f/Al composites and TiAl alloys with Ni-Al-Ti interlayer.
Rare Metals,2017,36(9):746-752
|
CSCD被引
2
次
|
|
|
|
|
7.
Feng G J. Microstructure and mechanical properties of Cf/Al-TiAl laser-assisted brazed joint.
Journal of Materials Processing Technology,2017,255:195-203
|
CSCD被引
1
次
|
|
|
|
|
8.
Feng G J. Laser-induced exothermic bonding of carbon fiber/Al composites and TiAl alloys.
Materials & Design,2017,126:197-206
|
CSCD被引
2
次
|
|
|
|
|
9.
Feng G J. Joining of Cf/Al composites and TiAl intermetallics by laser-induced selfpropagating high-temperature synthesis using the Ni-Al-Zr interlayer.
Materials & Design,2016,110:130-137
|
CSCD被引
5
次
|
|
|
|
|
10.
Feng G J. Effect of Ti–Al content on microstructure and mechanical properties of C_f/Al and TiAl joint by laser ignited self-propagating high-temperature synthesis.
Transactions of Nonferrous Metals Society of China,2015,25(5):1468-1477
|
CSCD被引
11
次
|
|
|
|
|
11.
Baughman R H. Carbon nanotubes-the route toward applications.
Science,2002,297(5582):787-792
|
CSCD被引
463
次
|
|
|
|
|
12.
Young R J. The mechanics of graphene nanocomposites:a review.
Composites Science & Technology,2012,72(12):1459-1476
|
CSCD被引
44
次
|
|
|
|
|
13.
Bbakshi S R. Carbon nanotube reinforced metal matrix composites-a review.
International Materials Reviews,2010,55(1):41-64
|
CSCD被引
113
次
|
|
|
|
|
14.
Jang B Z. Processing of nanographene platelets (NGPs) and NGP nanocomposites:a review.
Journal of Materials Science,2008,43(15):5092-5101
|
CSCD被引
13
次
|
|
|
|
|
15.
Bianco A. All in the graphene family-a recommended nomenclature for twodimensional carbon materials.
Carbon,2013,65:1-6
|
CSCD被引
23
次
|
|
|
|
|
16.
Wu G H. Reaction procedure of a graphite fiber reinforced Ti-Al composite produced by squeeze casting-in situ reaction.
Rare Metals,2010(1):100-103
|
CSCD被引
1
次
|
|
|
|
|
17.
Cui S. Carbon fibers coated with graphene reinforced TiAl alloy composite with high strength and toughness.
Scientific Reports,2018,2364:1-8
|
CSCD被引
1
次
|
|
|
|
|
18.
郭文生. 碳纳米管增强钛铝基复合材料的组织与性能.
安徽工业大学学报,2009,26(3):243-244
|
CSCD被引
1
次
|
|
|
|
|
19.
Yang F. Effect of spark plasma sintering temperature on the microstructure and mechanical properties of a Ti_2AlC/TiAl composite.
Journal of Alloys & Compounds,2010,496(1/2):0-466
|
CSCD被引
1
次
|
|
|
|
|
20.
Wang J. In situ synthesis of Ti_2AlC-Al_2O_3/TiAl composite by vacuum sintering mechanically alloyed TiAl powder coated with CNTs.
Journal of Alloys & Compounds,2013,578:481-487
|
CSCD被引
8
次
|
|
|
|
|
了解气象卫星更多信息，请访问