基于密闭爆发器试验的发射装药内弹道性能预估
Interior Ballistic Performance Prediction of Gun Propellant Charge Based on Closed-bomb Test
查看参考文献12篇
文摘
|
为了预估发射装药的内弹道性能,建立了一种基于密闭爆发器试验检测发射药的静态燃烧性能参数进而预测其装药内弹道性能的方法,采用不同批次的单樟-5/7发射药进行了装药性能预估计算,并基于30 mm火炮对内弹道性能预估精度进行了试验验证。结果表明,采用所建立的基于密闭爆发器试验的发射装药内弹道性能预估方法计算获得的最大膛压为376.0MPa,与试验测试的膛压平均值388.7MPa的计算误差为3.27%;计算的炮口初速为1 143.5 m/s,与试验测试的炮口初速平均值1 156.3 m/s的计算误差为1.11%。所建立的基于密闭爆发器试验的发射装药内弹道性能预估方法具有较高的精度,可对发射药样品不同批次间的内弹道性能进行高效精确的预估,为长期贮存发射药使用寿命的判定及发射药产品的出厂校验提供了一种高效低成本的弹道性能评价方法。 |
其他语种文摘
|
To estimate the interior ballistic performance of gun propellant charge,a calculation method was established using static burning parameters obtained by the closed-bomb tests. The calculation of interior ballistic performance of charge was performed using 5/7 single-base camphor gun propellants from different batches,and the 30mm gun tests were carried out to evaluate the calculation accuracy. The results show that the calculated maximum chamber pressure by this method is 376.0MPa. Compared with mean value of tested maximum chamber pressure of 388.7MPa,the calculated error of the maximum chamber pressure is 3.27%. The calculated muzzle velocity is 1143.5m/s,with the calculation error of 1.11% compared with the tested velocity result of 1156.3m/s. The calculation method with high precision is effective on estimating the interior ballistic performance of propellants from different batches. It also provides a new method for assessment of propellant storage and service life. At last,it can serve as an economical and effective evaluation method in the delivery inspection. |
来源
|
火炸药学报
,2020,43(1):81-84,89 【核心库】
|
DOI
|
10.14077/j.issn.1007-7812.201901010
|
关键词
|
发射装药
;
内弹道性能
;
密闭爆发器试验
;
单樟-5/7发射药
|
地址
|
1.
西安近代化学研究所, 陕西, 西安, 710065
2.
南京理工大学化工学院, 江苏, 南京, 210094
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1007-7812 |
学科
|
武器工业;化学工业 |
基金
|
基础产品创新科研火炸药专项
;
军委装备发展部专项项目
|
文献收藏号
|
CSCD:6686583
|
参考文献 共
12
共1页
|
1.
刘杰. 发射药贮存寿命预测技术研究进展.
装备环境工程,2011,8(6):38-42
|
CSCD被引
4
次
|
|
|
|
2.
刘子如. 预估火炸药寿命的数学模型及其计算.
火炸药学报,2016,39(2):1-7
|
CSCD被引
12
次
|
|
|
|
3.
廖昕. RB型硝胺发射药使用寿命实验研究.
含能材料,2010,18(1):188-191
|
CSCD被引
3
次
|
|
|
|
4.
顾妍. 某三基发射药贮存寿命的预估方法.
火炸药学报,2017,40(1):91-96
|
CSCD被引
7
次
|
|
|
|
5.
王琼林. 一种基于密闭爆发器试验的发射药燃烧渐增性定量评价方法.
火炸药学报,2009,32(3):71-74
|
CSCD被引
28
次
|
|
|
|
6.
温刚. 用密闭爆发器测定发射药实际燃速的原理和方法.
火炸药学报,2011,34(3):57-60
|
CSCD被引
5
次
|
|
|
|
7.
Rodrigues B. Closed vessel experiment modeling and ballistic parameter estimation of gun propellants for lifetime prediction.
Latin American Applied Research,2006,36(4):229-233
|
CSCD被引
2
次
|
|
|
|
8.
Rotariu A. A new model of projectile ballistic acceleration process based on closed vessel experimental data.
12th WSEAS Int Conf on Applied Mathematics,2007:95-99
|
CSCD被引
1
次
|
|
|
|
9.
Laurence J. Ballistic firing and closed vessel tests: comparison of their respective experimental outputs.
21th International Symposium on Ballistics,2004:1-17
|
CSCD被引
2
次
|
|
|
|
10.
崔鹏腾. 叠氮硝胺发射药的贮存性能研究.
火工品,2018(3):35-37
|
CSCD被引
2
次
|
|
|
|
11.
王泽山.
火药装药设计原理与技术,2006
|
CSCD被引
45
次
|
|
|
|
12.
金志明.
枪炮内弹道学,2004
|
CSCD被引
120
次
|
|
|
|
|