Cr含量对激光增材制造12CrNi2合金钢的组织结构的影响
Effect of Cr-Content on Microstructure of 12CrNi2 Alloy Steel Prepared by Laser Additive Manufacturing
查看参考文献19篇
|
文摘
|
对商用12CrNi2合金钢粉末进行激光增材制造时发现,在沉积态合金钢内部产生了大量的孔洞。这种孔洞的形成,主要与溶池中的O与C反应生成的气泡有关。合金钢粉末中增加Cr量后,它因与O亲和力大而在溶池中优先“捕捉”O析出Cr_2O_3,有效地抑制了成形合金钢中孔洞的形成;Cr_2O_3的析出使成形合金钢铁素体和奥氏体的组织细化,提高了合金钢的显微硬度。 |
|
其他语种文摘
|
12CrNi2 alloy steel has been prepared by means of laser additive manufacturing (LAM) using a commercial alloy steel powder. The results show that the LAMed alloy steel contains a large number of pores intrinsically associated with the reaction of O and C, which form gases in molten pool of the laser melting alloy steel powder. The pore formation can be highly suppressed by adding into the steel powder with small amounts of Cr, because it preferentially reacts with O to form Cr_2O_3 and consequently prevents the gases formation in the molten pool. The Cr_2O_3 formation also refines the ferrite and the austenite phases of the LAMed alloy steel and increases its hardness. |
|
来源
|
材料研究学报
,2018,32(11):827-833 【核心库】
|
|
DOI
|
10.11901/1005.3093.2017.582
|
|
关键词
|
金属材料
;
组织结构
;
激光增材制造
;
Cr含量
;
合金钢
|
|
地址
|
1.
中国科学院金属研究所金属腐蚀与防护实验室, 沈阳, 110016
2.
中国科学技术大学材料科学与工程学院, 合肥, 230026
3.
南昌航空大学材料科学与工程学院, 南昌, 330063
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1005-3093 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家重点研发计划
|
|
文献收藏号
|
CSCD:6383016
|
参考文献 共
19
共1页
|
|
1.
Murr L E. Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies.
J. Mater. Sci. Technol,2012,20:1
|
CSCD被引
90
次
|
|
|
|
|
2.
Popovich V A. Functionally graded Inconel718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties.
Materials Design,2017,114:441
|
CSCD被引
24
次
|
|
|
|
|
3.
Elahinia M. Fabrication of Ni-Ti through additive manufacturing: A review.
Prog. Mater. Sci,2016,83:630
|
CSCD被引
57
次
|
|
|
|
|
4.
Hagedorn Y. Laser additive manufacturing of ceramic components: Materials, processes, and mechanisms.
Laser Additive Manufacturing,2017:163
|
CSCD被引
3
次
|
|
|
|
|
5.
林鑫. 高性能金属构件的激光增材制造.
中国科学:信息科学,2015,45:1111
|
CSCD被引
91
次
|
|
|
|
|
6.
王华明. 大型钛合金结构件激光直接制造的进展与挑战(邀请论文).
中国激光,2009,36:3204
|
CSCD被引
126
次
|
|
|
|
|
7.
杨强. 激光增材制造技术的研究现状及发展趋势.
航空制造技术,2012,12:26
|
CSCD被引
1
次
|
|
|
|
|
8.
Liu R. Aerospace applications of laser additive manufacturing.
Laser Additive Manufacturing,2017:351
|
CSCD被引
6
次
|
|
|
|
|
9.
Wu C F. Laser cladding in-situ carbide particle reinforced Fe-based composite coatings with rare earth oxide addition.
Journal of Rare Earths,2009,27(6):997
|
CSCD被引
21
次
|
|
|
|
|
10.
Zhou C Y. Mitigation of pores generation at overlapping zone during laser cladding.
J. Mater. Process. Technol,2015,216:269
|
CSCD被引
1
次
|
|
|
|
|
11.
齐勇田. 激光熔覆铁基合金涂层开裂行为及其产生机制.
应用激光,2015,35(6):639
|
CSCD被引
3
次
|
|
|
|
|
12.
Wang Y B. Microstructure and properties of laser cladding FeCrBSi composite powder coatings with higher Cr content.
J. Mater. Process. Technol,2014,214:899
|
CSCD被引
12
次
|
|
|
|
|
13.
Lepera F S. Improved etching technique to emphasize martensite and bainite in high-strength dual-phase steel.
JOM,1980,32:38
|
CSCD被引
12
次
|
|
|
|
|
14.
Girault E. Metallographic methods for revealing the multiphase microstructure of TRIP-assisted steels.
Materials Characterization,1998,40:111
|
CSCD被引
50
次
|
|
|
|
|
15.
蔡晓文. TRIP 钢彩色金相组织定量分析方法.
金属热处理,2014,39(12):139
|
CSCD被引
5
次
|
|
|
|
|
16.
Barin I.
Thermochemical Data of Pure Substances. Third Edition,1989
|
CSCD被引
1
次
|
|
|
|
|
17.
杨全民. 奥氏体贫碳区性质与贝氏体相变热力学.
金属学报,1990,26(4):A235
|
CSCD被引
2
次
|
|
|
|
|
18.
Qiao Z X. Formation mechanism of granular bainite in a 30CrNi3MoV steel.
J. Alloy. Compd,2009,475:560
|
CSCD被引
22
次
|
|
|
|
|
19.
蒋中华. 回火温度对2.25Cr-1Mo-0.25V钢粒状贝氏体显微组织和力学性能的影响.
金属学报,2015,51:925
|
CSCD被引
30
次
|
|
|
|
|
了解气象卫星更多信息，请访问