刮削作用对涡轮转子机匣通道涡形成的影响
Influence of scrapping effect on formation of casing passage vortex in turbine rotor
查看参考文献29篇
|
文摘
|
采用数值方法求解耦合剪切应力输运(SST)湍流模型的雷诺平均Navier-Stokes方程组,研究了不同间隙尺寸下GE-E3高压涡轮第一级转子内刮削作用对机匣通道涡形成和发展的影响。通过与轮毂通道涡结构的对比,发现机匣通道涡层次结构与经典二次流理论存在明显的差异,并对该差异形成的原因进行了深入探索。结果表明:叶顶对机匣边界层的刮削作用在机匣通道涡的形成过程中占主导作用,刮削作用使得流向叶片吸力面的来流机匣边界层在交汇点区域从内层向外层卷起,形成层次结构相反的机匣通道涡;叶顶浸入比值是影响转子机匣通道涡形成的重要参数,随着比值的增大,机匣通道涡损失先增大后减小;只有在间隙尺寸较大情况下,叶尖间隙的“抽吸作用”才能抑制机匣通道涡的发展。 |
|
其他语种文摘
|
Investigations into the influence of scrapping effect on the formation and development of rotor casing passage vortex were carried out in the first-stage high pressure turbine( HPT)rotor of GE-E3 with various tip clearance by solving Reynolds-averaged Navier- Stokes equations with shear stress transport(SST)turbulence model.Compared with the hub passage vortex,the casing passage vortex was found different from the classical theory of endwall secondary flow,and the origin for these differences was explored.The results indicated that:the scrapping effect of blade tip on the casing boundary layer played a dominant role in the formation of casing passage vortex.It made the inner part of inlet casing boundary layer flow towards the merging region on suction surface,roll up and wrap the outer part, and a casing passage vortex was developed with reverse construction.Immerging ratio of blade tip was an essential parameter affecting the formation of casing passage vortex,and the loss could increase first before decrease as the tip clearance size increased.Only in the situation of large tip clearance size could the“suction effect”of tip clearance suppress the development of casing passage vortex. |
|
来源
|
航空动力学报
,2018,33(7):1695-1704 【核心库】
|
|
DOI
|
10.13224/j.cnki.jasp.2018.07.018
|
|
关键词
|
涡轮转子
;
机匣通道涡
;
刮削作用
;
二次流
;
叶尖间隙尺寸
|
|
地址
|
1.
南方科技大学力学与航空航天工程系, 深圳, 518055
2.
华南理工大学机械与汽车工程学院, 广州, 510641
3.
西北工业大学动力与能源学院, 西安, 710012
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1000-8055 |
|
学科
|
航空 |
|
文献收藏号
|
CSCD:6291985
|
参考文献 共
29
共2页
|
|
1.
Booth T C.
Importance of tip clearance flows in turbine design. VKI LS 1985-05,1985
|
CSCD被引
3
次
|
|
|
|
|
2.
孙大伟.
高压涡轮二次流机理、损失模型及控制技术研究,2009
|
CSCD被引
5
次
|
|
|
|
|
3.
Sharma O P. Predictions of endwall losses and secondary flows in axial flow turbine cascades.
Journal of Turbomachinery,1987,109(2):229-236
|
CSCD被引
44
次
|
|
|
|
|
4.
Denton J D. The 1993IGTI scholar lecture:loss mechanisms in turbomachines.
Journal of Turbomachinery,1993,115(4):621-656
|
CSCD被引
274
次
|
|
|
|
|
5.
Horlock J H. Secondary flows:theory,experiment,and application in turbomachinery aerodynamics.
Annual Review of Fluid Mechanics,1973,5(1):247-280
|
CSCD被引
11
次
|
|
|
|
|
6.
Sieverding C H. Recent progress in the understanding of basic aspects of secondary flows in turbine blade passages.
Journal of Engineering for Gas Turbines and Power,1985,107(2):248-257
|
CSCD被引
27
次
|
|
|
|
|
7.
Langston L S. Secondary flows in axial turbines:a review.
Annals of the New York Academy of Sciences,2001,934(1):11-26
|
CSCD被引
23
次
|
|
|
|
|
8.
Patdiwala U J. A review on tip clearance flow and secondary flow losses in linear turbine cascade.
Journal of Mechanical and Civil Engineering,2014,11(3):33-37
|
CSCD被引
1
次
|
|
|
|
|
9.
Wang H P. Flow visualization in a linear turbine cascade of high performance turbine blades.
Journal of Turbomachinery,1997,119(1):1-8
|
CSCD被引
70
次
|
|
|
|
|
10.
Yamamoto A. Interaction mechanisms between tip leakage flow and the passage vortex in a linear turbine rotor cascade.
Journal of Turbomachinery,1988,110(3):329-338
|
CSCD被引
19
次
|
|
|
|
|
11.
Yamamoto A. Endwall flow/lss mechanisms in a linear turbine cascade with blade tip clearance.
Journal of Turbomachinery,1989,111(3):264-275
|
CSCD被引
30
次
|
|
|
|
|
12.
Yaras M I. Effects of simulated rotation on tip leakage in a planar cascade of turbine blades:PartⅡdownstream flow field and blade loading.
Journal of Turbomachinery,1992,114(3):660-667
|
CSCD被引
9
次
|
|
|
|
|
13.
Yaras M I. Effects of simulated rotation on tip leakage in a planar cascade of turbine blades:Part I:tip gap flow.
Journal of Turbomachinery,1992,114(3):652-659
|
CSCD被引
20
次
|
|
|
|
|
14.
Tallman J. Numerical simulation of tip leakage flows in axial flow turbines,with emphasis on flow physics:Part I effect of tip clearance height.
Journal of Turbomachinery,2000,123(2):314-323
|
CSCD被引
30
次
|
|
|
|
|
15.
Tallman J. Numerical simulation of tip leakage flows in axial flow turbines,with emphasis on flow physics:PartⅡeffect of outer casing relative motion.
Journal of Turbomachinery,2000,123(2):324-333
|
CSCD被引
30
次
|
|
|
|
|
16.
Timjo L P.
Energy efficient engine:high pressure turbine component test performance report,1984
|
CSCD被引
1
次
|
|
|
|
|
17.
高杰. 涡轮间隙泄漏涡破碎对损失的影响.
航空学报,2014,35(5):1257-1264
|
CSCD被引
13
次
|
|
|
|
|
18.
Wei Z J.
Influence of turbulence modeling on the secondary flow prediction. ISJPPE-2012-H0025,2012
|
CSCD被引
1
次
|
|
|
|
|
19.
邹正平. 上游尾迹与涡轮转子泄漏流相互作用数值模拟.
航空动力学报,2010(1):58-66
|
CSCD被引
11
次
|
|
|
|
|
20.
Yang D L.
Tip leakage flow and heat transfer predictions for turbine blades. ASME Paper GT2007-27728,2007
|
CSCD被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问