双层预制破片爆轰驱动早期行为研究
Research on the Behavior of Initial Stage about Explosively-driven Double-layered Premade Fragments
查看参考文献9篇
文摘
|
通过分析方/球形双层预制破片在典型排布方式下的受力状态,并结合炸药爆轰驱动能量的释放规律,将双层破片的加速过程分为两个阶段,即冲击碰撞加速阶段和气体产物膨胀加速阶段;采用闪光X射线照相方法测量破片在冲击碰撞加速阶段的加速过程,然后结合经典Gurney公式计算出气体产物膨胀加速效果;对典型钨、钢材料的方/球形双层破片进行了试验和理论分析。结果表明,外层破片的初速均高于内层破片,其中,外、内层方形钢破片的初速比值最大,约为1.48,且外层方形破片由于受到较强拉伸波作用而出现明显破损;而外、内层球形钨破片的初速比值最小,仅为1.08,且球形破片大多为斜侧方对称受力,难以形成较强且较为集中的拉伸波,使得外层破片的完整性较好。 |
其他语种文摘
|
By analyzing the stress state of double-layered cubical/spherical prefabricated fragments under the typical arrangement and combining the release law of detonation driving energy,the acceleration process of double-layered fragments was divided into two stages,namely,shock acceleration stage and expansion acceleration stage of gas product.The acceleration process of fragment in the shock acceleration stage was measured by flash X-ray photography, the acceleration effect of gas product expansion was calculated by classical Gurney formula.The experimental and theoretical analysis of the double-layered cubical/spherical fragments of typical tungsten and steel materials were carried out.The results show that the initial velocity of the outer layer fragments is higher than that of the inner layer fragments,wherein,the ratio of the initial velocity of the inner and outer layered cubical steel fragments is the largest,which is about 1.48,and the outer layered cubical steel fragments is obviously damaged due to the strong tensile wave action.The ratio of the initial velocity of the inner and outer layered spherical tungsten fragments is the smallest,which is only 1.08.Moreover,the spherical fragments are mainly subjected to the symmetrical force from the inclined sides,so that it is difficult to form a stronger and more concentrated tensile wave,resulting in better integrity of the outer fragments. |
来源
|
火炸药学报
,2018,41(3):308-313 【核心库】
|
DOI
|
10.14077/j.issn.1007-7812.2018.03.017
|
关键词
|
爆炸力学
;
杀爆战斗部
;
双层预制破片
;
爆轰驱动
;
闪光X射线摄影
|
地址
|
西安近代化学研究所, 陕西, 西安, 710065
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1007-7812 |
学科
|
力学;武器工业 |
基金
|
国家重大基础科研专项
|
文献收藏号
|
CSCD:6276584
|
参考文献 共
9
共1页
|
1.
Charron Y J.
Estimation of velocity distribution of fragmenting warheads using a modified gurney method,1979
|
CSCD被引
8
次
|
|
|
|
2.
Hutchinson M D. With-fracture Gurney model to estimate both fragment and blast Impulses.
Central European Journal of Energetic Materials,2010,7(2):175-186
|
CSCD被引
2
次
|
|
|
|
3.
印立魁. 立方体预制破片战斗部破片初速计算模型.
兵工学报,2014,35(12):1967-1971
|
CSCD被引
13
次
|
|
|
|
4.
印立魁. 多层球形预制破片战斗部破片初速场的计算模型.
含能材料,2014,22(3):300-305
|
CSCD被引
12
次
|
|
|
|
5.
魏继锋. 预制破片战斗部试验与数值模拟研究.
弹箭与制导学报,2004,24(3):39-41
|
CSCD被引
11
次
|
|
|
|
6.
Porter W R.
Radially expanding fragmentation warhead study,AD0348620,1963
|
CSCD被引
1
次
|
|
|
|
7.
张立建. 爆轰加载下双层预制破片初速梯度研究.
科学技术与工程,2015,15(25):135-138
|
CSCD被引
1
次
|
|
|
|
8.
沈飞. 铝含量对RDX基含铝炸药驱动能力的影响.
火炸药学报,2013,36(3):50-53
|
CSCD被引
13
次
|
|
|
|
9.
黄正祥.
终点效应,2014
|
CSCD被引
16
次
|
|
|
|
|