帮助 关于我们

返回检索结果

Refill friction stir spot welding of 5083-O aluminum alloy

查看参考文献32篇

Xu Zhiwu 1 *   Li Zhengwei 1   Ji Shude 2 *   Zhang Liguo 2  
文摘 In this work, refill friction stir spot welding (RFSSW) was used to weld 2 mm-thick 5083-O alloy. The Box–Behnken experimental design was used to investigate the effect of welding parameters on the joint lap shear property. Resultsshowedthat a surface indentation of 0.3mmeffectively eliminated the welding defects. Microhardness of the stir zone (SZ) was higher than that of the base material (BM) and the hardness decreased with increasing the heat input during welding. The optimum failure load of 7.72kN was obtained when using rotating speed of 2300 rpm, plunge depth of 2.4mm and refilling time of 3.5 s. Three fracture modes were obtained during the lap shear test and all were affected by the hook defect.
来源 Journal of Materials Science & Technology ,2018,34(5):878-885 【核心库】
DOI 10.1016/j.jmst.2017.02.011
关键词 Refill friction stir spot welding ; Keyhole ; Secondary phases ; Microhardness ; Lap shear failure load
地址

1. Harbin Institute of Technology, State Key Laboratory of Advanced Welding and Joining, Harbin, 150001  

2. Faculty of Aerospace Engineering, Shenyang Aerospace University, Shenyang, 110136

语种 英文
文献类型 研究性论文
ISSN 1005-0302
学科 金属学与金属工艺
基金 国家自然科学基金
文献收藏号 CSCD:6240463

参考文献 共 32 共2页

1.  Babu S. Microstructure and Mechanical Properties of Friction Stir Lap Welded Aluminum Alloy AA2014. J. Mater. Sci. Technol,2012,28:414-426 CSCD被引 11    
2.  Mahmoud T S. J. Mater. Eng. Perform,2014,23:898-905 CSCD被引 2    
3.  Su P. Metall. Mater. Trans. A,2007,38:584-595 CSCD被引 7    
4.  Yuan W. Mater. Sci. Eng. A,2007,543:200-209 CSCD被引 1    
5.  Shen Z K. Mater. Des,2012,44:476-486 CSCD被引 36    
6.  Pan T. SAE Int. J. Mater. Manuf,2009,2:23-29 CSCD被引 1    
7.  Tier M A D. J. Mater. Process. Technol,2013,213:997-1005 CSCD被引 16    
8.  Uematsu Y. Int. J. Fatigue,2008,30:1956-1966 CSCD被引 20    
9.  Shen Z K. Mater. Des,2014,54:766-778 CSCD被引 4    
10.  Iwashita T. Method and Apparatus for Joining, U.S. Patent 6601751 B2,2003 CSCD被引 1    
11.  Ji S. Trans. Indian Inst. Met,2016 CSCD被引 1    
12.  Zhao Y Q. Mater. Des,2014,62:40-46 CSCD被引 16    
13.  Zhao Y Q. Sci. Technol. Weld. Join,2014,19:617-622 CSCD被引 11    
14.  Li Z. Int. J. Adv. Manuf. Technol,2016,86:1925-1932 CSCD被引 11    
15.  Rosendo T. Mater. Des,2011,32:1094-1100 CSCD被引 27    
16.  Plaine A H. Mater. Des,2015,83:36-41 CSCD被引 5    
17.  Suhuddin U. Mater. Sci. Eng. A,2014,590:384-389 CSCD被引 11    
18.  Suhuddin U F H. Scr. Mater,2013,68:87-90 CSCD被引 16    
19.  Amancio-Filho S T. Mater. Sci. Eng. A,2011,528:3841-3848 CSCD被引 19    
20.  Goncalves J. Mater. Lett,2015,159:506-509 CSCD被引 5    
引证文献 7

1 Chu Q Microstructure and mechanical optimization of probeless friction stir spot welded joint of an Al-Li alloy Journal of Materials Science & Technology,2018,34(10):1739-1746
CSCD被引 17

2 邹阳帆 不等厚2219铝合金板回填式搅拌摩擦点焊接头组织及性能研究 机械工程学报,2020,56(6):176-183
CSCD被引 7

显示所有7篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号