稀土Er对A356铝合金微观组织和力学性能的影响
Effect of Rare Earth Erbium on Microstructure and Mechanical Properties of A356Aluminum Alloy
查看参考文献20篇
文摘
|
针对传统的A356铝合金,添加稀土元素是改善其微观组织并提高力学性能的有效途径。本工作通过示差扫描量热分析(DSC)、X射线衍射(XRD)、扫描电镜(SEM)等分析手段来研究稀土Er对铸态A356铝合金组织和性能的影响。结果表明,稀土元素Er是一种能够显著改善A356合金铸态组织的优良变质剂。Er的加入细化了初生α-Al相,二次枝晶间距降低,枝晶臂直径减小,同时对铸态组织中的共晶Si起到了变质作用。当Er含量达到0.4%(质量分数,下同)时,细化效果最为显著,二次枝晶间距由53.6μm减小到17.5μm,共晶硅形貌也由粗大的板条状转变为短棒或圆粒状。与A356合金相比,添加0.4%Er的合金样品的抗拉强度和伸长率分别提高了15.1%,29.8%。 |
其他语种文摘
|
For conventional A356aluminum alloy,the addition of rare earth elements is an effective way to modify its microstructures and improve its mechanical properties.The effect of rare earth Er on microstructures and properties of as-cast A356aluminum alloy was studied by differential scanning calorimetry(DSC),X-ray diffraction(XRD)and scanning electron microscopy(SEM).The results indicate that rare earth element Er is a good modifier for A356aluminum alloy,which is able to improve obviously the microstructure of as-cast alloy.The addition of Er refines the primaryα-Al phase, decreases the secondary dendrite arm spacing and the dendrite arm diameter,and modifies the eutectic Si in as-cast structure simultaneously.When the amount of Er reaches 0.4% (mass fraction,the same below),the refinement effect is the most significant,secondary dendrite arm spacing decreases from 53.6μm to 17.5μm and the morphology of eutectic Si transforms from thick lath-shaped to short rodlike or round granular.Compared with A356alloy,the tensile strength and elongation of A356aluminum alloy with the addition of 0.4%Er increase by 15.1%and 29.8%respectively. |
来源
|
材料工程
,2018,46(1):67-73 【核心库】
|
DOI
|
10.11868/j.issn.1001-4381.2016.001066
|
关键词
|
A356铝合金
;
稀土Er
;
微观组织
;
力学性能
|
地址
|
1.
江苏省高性能材料绿色成形技术与装备重点建设实验室, 江苏省高性能材料绿色成形技术与装备重点建设实验室, 江苏, 常州, 213001
2.
江苏理工学院材料工程学院, 江苏, 常州, 213001
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1001-4381 |
学科
|
金属学与金属工艺 |
基金
|
国家自然科学基金项目
;
江苏省产学研前瞻性联合研究项目
|
文献收藏号
|
CSCD:6162166
|
参考文献 共
20
共1页
|
1.
Atxaga G. Effect of microstructure on fatigue behaviour of cast Al-7Si-Mg alloy.
Materials Science and Technology,2001,17(44):446-450
|
CSCD被引
18
次
|
|
|
|
2.
Shi Z M. Effects of erbium modification on the microstructure and mechanical properties of A356 aluminum alloys.
Materials Science and Engineering:A,2015,626:102-107
|
CSCD被引
12
次
|
|
|
|
3.
廖恒成. 混合稀土对Sr变质近共晶Al-Si合金组织的影响.
中国有色金属学报,2000,10(5):640-644
|
CSCD被引
22
次
|
|
|
|
4.
Kobayashi T. Strength and fracture of aluminum alloys.
Materials Science and Engineering:A,2000,280(1):8-16
|
CSCD被引
29
次
|
|
|
|
5.
Hosseinifar M. The sequence of intermetallics formation during the solidification of an Al-Mg-Si alloy containing La.
Metallurgical and Materials Transactions A,2011,42(3):825-832
|
CSCD被引
20
次
|
|
|
|
6.
Sebaie O E. The effects of mischmetal,cooling rate and heat treatment on the eutectic Si particle characteristics of A319.1,A356.2and A413.1 Al-Si casting alloys.
Materials Science and Engineering:A,2008,486(1/2):342-355
|
CSCD被引
22
次
|
|
|
|
7.
张建新. 微量Y对Al-Mg-Si系合金组织性能的影响.
航空材料学报,2012,32(1):6-9
|
CSCD被引
9
次
|
|
|
|
8.
Tsai Y C. Effect of trace La addition on the microstructures and mechanical properties of A356 (Al-7Si-0.35Mg)aluminum alloys.
Journal of Alloys and Compounds,2009,487(1/2):157-162
|
CSCD被引
61
次
|
|
|
|
9.
刘小梅. 稀土La对半固态A356铝合金凝固组织的影响.
铸造,2010,59(7):708-711
|
CSCD被引
4
次
|
|
|
|
10.
张秀梅. 稀土Ce变质对ZL101合金铸态组织和性能的影响.
铸造,2008,57(8):838-841
|
CSCD被引
6
次
|
|
|
|
11.
黄吉. Sc对A356合金组织和性能的影响.
特种铸造及有色合金,2015,35(12):1318-1321
|
CSCD被引
8
次
|
|
|
|
12.
朱世旦. Al_3Er相在Al-Er合金中的存在形式.
轻合金加工技术,2009,37(5):53-59
|
CSCD被引
3
次
|
|
|
|
13.
刘政. 电磁搅拌下混合稀土对半固态A356合金初生α相的细化机理.
中国有色金属学报,2013,23(8):2110-2117
|
CSCD被引
5
次
|
|
|
|
14.
Nogita K. The role of trace element segregation in the eutectic modification of hypoeutectic Al-Si alloys.
Journal of Alloys and Compounds,2010,489(2):415-420
|
CSCD被引
23
次
|
|
|
|
15.
汪长勤. 稀土钇对A356合金显微组织和拉伸性能的影响.
机械工程材料,2010,34(1):13-16
|
CSCD被引
14
次
|
|
|
|
16.
闫洪. 稀土对铝合金变质处理的研究进展.
材料导报,2013,27(22):285-287
|
CSCD被引
11
次
|
|
|
|
17.
刘政. 稀土细化剂对A356半固态组织影响的研究.
特种铸造及有色合金,2007(增刊1):404-407
|
CSCD被引
2
次
|
|
|
|
18.
邢泽炳. Al-Er合金铸锭中铒的存在形式及作用研究.
中国稀土学报,2007,25(2):234-238
|
CSCD被引
19
次
|
|
|
|
19.
黄学锋. 稀土铒(Er)改性6063铝合金铸态微观组织与性能.
金属热处理,2011,36(2):21-25
|
CSCD被引
4
次
|
|
|
|
20.
孙嫣然. Er对Ti-16Al-27Nb合金组织和性能的影响.
中国有色金属学报,2011,21(11):2769-2774
|
CSCD被引
2
次
|
|
|
|
|