文摘
|
采用有限元分析软件ANSYS模拟了面对等离子体钨材料在聚变瞬态高热流加载和卸载过程中的温度和应力分布以及演化过程,并结合材料力学性能对热冲击开裂行为进行了分析和讨论。结果表明, 在瞬态热流下,钨的单次热冲击开裂阈值约200MW.m~(-2) (~5ms)、460MW·m~(-2) (~1ms)和660MW·m~(-2)(~0.5ms),其临界热流因子(14.14~14.75MW·m~(-2)·s~(1/2))也基本一致。 |
其他语种文摘
|
Thermo-mechanical analysis was performed to simulate the temperature and stress distribution for tungsten material facing plasma under fusion related transient heat flux loading and unloading using finite-element analysis code ANSYS. And combined its mechanical properties, its crack behavior under transient heat flux was analyzed. The results show that the crack thresholds of W are about 200MW·m~(-2)(~5ms), 460MW·m~(-2) (~1ms) and 660 MW·m~(-2)(~0.5ms) under single heat shot, corresponding to the coincident heat flux factors (14.14~14.75 MW·m~(-2)·s~(1/2)). |
来源
|
核聚变与等离子体物理
,2017,37(3):308-312 【核心库】
|
DOI
|
10.16568/j.0254-6086.201703011
|
关键词
|
钨
;
面对等离子体材料
;
有限元分析
;
瞬态热流
;
热-结构模拟
|
地址
|
中国科学院等离子体物理研究所, 合肥, 230031
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0254-6086 |
学科
|
原子能技术 |
基金
|
国家自然科学基金资助项目
|
文献收藏号
|
CSCD:6068279
|