缺口件疲劳寿命预测新方法
A New Method of Fatigue Life Prediction for Notched Specimen
查看参考文献23篇
|
文摘
|
采用有限元方法针对缺口件多轴疲劳实验结果进行模拟。结果表明,相同路径条件下,随着缺口半径减小缺口根部附近的应力梯度显著增加。基于缺口根部应变值,采用等效应变法进行疲劳寿命预测,预测结果随缺口半径的减小而偏于保守。采用应力梯度法确定有效距离,相同路径下,随着缺口半径的减小有效距离减小;依据该有效距离处的等效应变进行疲劳寿命预测,总体预测结果较为分散且偏于不安全。基于实验及有限元模拟结果,提出了基于应变梯度的有效距离确定的新方法,大部分疲劳寿命预测结果位于2倍分散带内。 |
|
其他语种文摘
|
The simulations of the notched specimens under multiaxial loading were conducted by finite element method. The simulation results show that the stress gradient increases with the decrease in notch radius for the same strain path. The equivalent strain method is used to predict the fatigue life based on the strain at the notched root. The prediction results are more conservative with the decrease in notch radius. The effective distance is determinated by the stress gradient method,and the effective distances are decreased with the decrease of notch radius for the same strain path. The fatigue life is predicted based on the strain at the effective distance,and the predictions are scattered and unconservative. Combining the test results and simulations,a new method determinating the effective distance is presented considering the strain gradient. Most prediction results are in a factor-2 scatter band. |
|
来源
|
航空材料学报
,2017,37(2):81-87 【核心库】
|
|
DOI
|
10.11868/j.issn.1005-5053.2015.000242
|
|
关键词
|
Mod. 9Cr-1Mo钢
;
缺口件
;
疲劳寿命预测
;
有效距离
;
应变梯度
|
|
地址
|
沈阳化工大学能源与动力工程学院, 沈阳, 110142
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1005-5053 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家自然科学基金资助项目
;
国家973计划
|
|
文献收藏号
|
CSCD:5961302
|
参考文献 共
23
共2页
|
|
1.
Arivazhagan B. A study on influence of shielding gas composition on toughness of flux-cored arc weld of modified 9Cr-1Mo (P91) steel.
Journal of Materials Processing Technology,2009,209(12/13):5245-5253
|
CSCD被引
5
次
|
|
|
|
|
2.
Karthik V. Tensile properties of modified 9Cr-1Mo steel by shear punch testing and correlation with microstructures.
International Journal of Pressure Vessels and Piping,2011,88(10):375-383
|
CSCD被引
2
次
|
|
|
|
|
3.
Yaguchi M. A viscoplastic constitutive model incorporating dynamic strain aging effect during cyclic deformation conditions.
International Journal of Plasticity,2000,16(3/4):241-262
|
CSCD被引
1
次
|
|
|
|
|
4.
Yaguchi M. Ratchetting of viscoplastic material with cyclic softening,part 1: experiments on modified 9Cr-1Mo steel.
International Journal of Plasticity,2005,21(1):43-65
|
CSCD被引
13
次
|
|
|
|
|
5.
Koo G H. Investigation of ratcheting characteristics of modified 9Cr-1Mo steel by using the Chaboche constitutive model.
International Journal of Pressure Vessels and Piping,2007,84(5):284-292
|
CSCD被引
4
次
|
|
|
|
|
6.
Masuyama F. Creep degradation in welds of Mod. 9Cr-1Mo steel.
International Journal of Pressure vessels and Piping,2006,83(11/12):819-825
|
CSCD被引
4
次
|
|
|
|
|
7.
Lee H Y. Creep-fatigue damage for a structure with dissimilar metal welds of modified 9Cr-1Mo steel and 316L stainless steel.
International Journal of Fatigue,2007,29(9/10/11):1868-1879
|
CSCD被引
8
次
|
|
|
|
|
8.
Fatemi A. Fatigue behavior and life predictions of notched specimens made of QT and forged microalloyed steels.
International Journal of Fatigue,2004,26(6):663-672
|
CSCD被引
6
次
|
|
|
|
|
9.
Siebel E. Significance of dissimilar stress distributions for cycling loading.
VDI-Z,1955,97(5):121-126
|
CSCD被引
4
次
|
|
|
|
|
10.
Filippini M. Stress gradient calculations at notches.
International Journal of Fatigue,2000,22(5):397-409
|
CSCD被引
16
次
|
|
|
|
|
11.
Adib-Ramezani H. Advanced volumetric method for fatigue life prediction using stress gradient effects at notch roots.
Computational Materials Science,2007,39(3):649-663
|
CSCD被引
17
次
|
|
|
|
|
12.
姚卫星.
结构疲劳寿命分析,2003
|
CSCD被引
225
次
|
|
|
|
|
13.
Taylor D. Prediction of fatigue failure location on a component using a critical distance method.
International Journal of Fatigue,2000,22(9):735-742
|
CSCD被引
14
次
|
|
|
|
|
14.
Taylor D. The theory of critical distances.
Engineering Fracture Mechanics,2008,75(7):1696-1705
|
CSCD被引
20
次
|
|
|
|
|
15.
Neuber H. Theory of stress concentration for shearstrained prismatical bodies with arbitrary nonlinear stressstrain law.
ASME Journal of Applied Mechanics,1961,28(4):544-550
|
CSCD被引
47
次
|
|
|
|
|
16.
Peterson R E.
Notch-sensitivity,1959
|
CSCD被引
1
次
|
|
|
|
|
17.
胡正云. TB6钛合金激光喷丸与机械喷丸残余应力场有限元模拟.
航空材料学报,2013,33(4):37-42
|
CSCD被引
7
次
|
|
|
|
|
18.
樊俊铃. 基于有限元法和锁相热像法对含缺陷构件的应力分析与疲劳性能评估.
材料工程,2015,43(8):62-71
|
CSCD被引
5
次
|
|
|
|
|
19.
Sakane M. Notch effect on multiaxial low cycle fatigue.
International Journal of Fatigue,2011,33(8):959-968
|
CSCD被引
5
次
|
|
|
|
|
20.
金丹. 非比例载荷下缺口件疲劳寿命有限元分析.
机械工程学报,2014,50(12):25-29
|
CSCD被引
5
次
|
|
|
|
|
了解气象卫星更多信息，请访问