火炮弹药协调器区间不确定参数辨识
Identification of Interval Uncertainty Parameters of a Howitzer Shell Transfer Arm
查看参考文献15篇
文摘
|
火炮弹药协调器是一个复杂的多参数机电液一体化系统,在建立其动力学模型时,某些对系统性能有重要影响的不可测或难以测量的参数,只能通过辨识的方法获得。为了实现弹药协调器的参数辨识,在Simulink中建立弹药协调器的动力学模型与控制模型,并利用区间数描述系统动作过程中的不确定参数;利用区间序关系转换模型,将存在区间不确定参数的辨识问题转换成确定性优化问题进行求解;以协调器支臂角速度曲线的相似度作为优化目标,利用差分进化算法实现了弹药协调器的参数辨识;利用仿真数据确定了此方法的辨识精度满足要求,并利用测试数据对真实系统的参数进行了辨识,验证了此方法的可行性和有效性。 |
其他语种文摘
|
Shell transfer arm is a complicated mechatronic and hydraulic integrated system of howitzer with multi-parameters. During the modeling process, some parameters are hard or unable to be measured but have significant effect on the performance of shell transfer arm, which can only be achieved by identification. For identifying the parameters of shell transfer arm, the dynamic and control models are built in Simulink, and the uncertainty parameters are described by interval number. The identification problem of interval uncertainty parameters is transformed into a certainty optimization problem via order relation of interval number transformation model. The similarity of angular velocity of shell transfer arm is set as the optimization objective function, and three parameters are identified by differential evolution (DE) method. The proposed method is verified by simulated and test data. The identification results of simulated data show that the identification accuracy satisfies the requirement, and the identification results of test data show that the proposed method is feasible and effective. |
来源
|
兵工学报
,2017,38(1):35-42 【核心库】
|
DOI
|
10.3969/j.issn.1000-1093.2017.01.005
|
关键词
|
兵器科学与技术
;
火炮
;
弹药协调器
;
参数辨识
;
区间优化
;
相似度分析
;
差分进化算法
|
地址
|
南京理工大学机械工程学院, 江苏, 南京, 210094
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1000-1093 |
学科
|
武器工业 |
基金
|
国家973计划
;
国家自然科学基金项目
|
文献收藏号
|
CSCD:5919247
|
参考文献 共
15
共1页
|
1.
侯保林.
火炮自动装填,2010
|
CSCD被引
28
次
|
|
|
|
2.
Alefeld G.
Introduction to interval computations,1983
|
CSCD被引
32
次
|
|
|
|
3.
Ljung L.
System Identification,1998
|
CSCD被引
6
次
|
|
|
|
4.
姜潮.
基于区间的不确定性优化理论与算法,2008
|
CSCD被引
49
次
|
|
|
|
5.
程志强. 区间参数不确定系统优化的可行性分析.
自动化学报,2004,30(3):455-459
|
CSCD被引
5
次
|
|
|
|
6.
蒋峥. 区间非线性规划问题的确定化描述及其递阶求解.
系统工程理论与实践,2005,25(1):110-116
|
CSCD被引
6
次
|
|
|
|
7.
Jiang C. An uncertain structural optimization method based on nonlinear interval number programming and interval analysis method.
Engineering Structures,2007,29(11):3168-3177
|
CSCD被引
20
次
|
|
|
|
8.
李红伟. 串励电机特性模拟与分析.
微电机,2010,43(8):95-97
|
CSCD被引
1
次
|
|
|
|
9.
Su C Y. Robust adaptive control of a class of nonlinear systems with unknown backlash-like hysteresis.
IEEE Transactions on Automatic Control,2000,45(12):2427-2432
|
CSCD被引
48
次
|
|
|
|
10.
马龙华.
不确定系统的鲁棒优化方法及应用研究,2002
|
CSCD被引
3
次
|
|
|
|
11.
孙晓辉. 结构多目标拓扑优化设计.
机械设计与研究,2012,28(4):1-4,9
|
CSCD被引
14
次
|
|
|
|
12.
何江.
基于混合动态仿真的发电机模型有效性评估及参数校正研究,2011
|
CSCD被引
1
次
|
|
|
|
13.
Xu Z H.
Uncertain multi-attribute decision making:methods and applications,2015
|
CSCD被引
1
次
|
|
|
|
14.
杨玉良. 火炮动力后坐试验台建模及射击模拟准确度评估.
振动与冲击,2014,33(10):127-130
|
CSCD被引
3
次
|
|
|
|
15.
Price K.
Differential evolution:a practical approach to global optimization,2006
|
CSCD被引
6
次
|
|
|
|
|