帮助 关于我们

返回检索结果

爆炸载荷下泡沫铝夹芯板变形与破坏模式的实验研究
Experimental Investigation into Deformation and Damage Patterns of Sandwich Plates with Aluminum Foam Core Subjected to Blast Loading

查看参考文献22篇

王涛 1   余文力 2   秦庆华 1   王金涛 2   王铁军 1  
文摘 系统地开展了爆炸载荷作用下泡沫铝夹芯板变形与破坏的实验研究,获得了冲量45.6N?s、76.2N?s、104.6N?s、131.7N?s、183.6N?s 5种不同爆炸载荷作用下泡沫铝夹芯板背面板中心点的变形挠度,给出了泡沫铝夹芯板前面板、泡沫铝芯体和背面板在不同爆炸载荷作用下的变形与破坏模式,分析了泡沫铝芯体产生的剪切断裂和拉伸断裂两种不同机理。研究结果表明,泡沫铝芯体呈现"渐进式"压缩变形,泡沫铝夹芯板背面板中心点的变形挠度与爆炸冲量之间近似满足二次关系。
其他语种文摘 The deformation and damage patterns of clamped sandwich plates with aluminum foam core subjected to blast loading are investigated experimentally. The deflections of the center point on the rear face sheet of sandwich plates under five blast loadings are obtained. The deformation and damage patterns of the front face sheet, aluminum foam core and rear face sheet subjected to different blast loadings are given also. Two types of the fracture mechanism of the foam cores, which are shear fracture and tensile fracture, are analyzed. The research results show that the foam core subjected to intensive dynamic loading is deformed in a "progressive" compressive mode, and the maximum deflection of the rear face sheet quadratically increases with the blast impulse approximately.
来源 兵工学报 ,2016,37(8):1456-1463 【核心库】
DOI 10.3969/j.issn.1000-1093.2016.08.017
关键词 兵器科学与技术 ; 爆炸波 ; 泡沫铝 ; 夹芯板 ; 变形挠度 ; 变形与破坏模式
地址

1. 西安交通大学航天学院, 机械结构强度与振动国家重点实验室, 陕西, 西安, 710049  

2. 火箭军工程大学核工程系, 陕西, 西安, 710025

语种 中文
文献类型 研究性论文
ISSN 1000-1093
学科 力学
基金 国家自然科学基金项目 ;  陕西省自然科学基金
文献收藏号 CSCD:5789836

参考文献 共 22 共2页

1.  Gibson L J. Cellular solids: structure and properties. 2nd ed,1997 CSCD被引 147    
2.  Hanssen A G. Close-range blast loading of aluminium foam panels. International Journal of Impact Engineering,2002,27(6):593-618 CSCD被引 37    
3.  Ye Z Q. Effects of foam claddings for structure protection against blast loads. Journal of Engineering Mechanics-ASCE,2007,133(1):41-47 CSCD被引 3    
4.  Qin Q H. A simplified analytical model for metal sandwich beam with soft core under impulsive loading over a central patch. International Journal of Impact Engineering,2014,74:67-82 CSCD被引 2    
5.  Qin Q H. Large deflection response of rectangular metal sandwich plates subjected to blast loading. European Journal of Mechanics-A/Solids,2014,47:14-22 CSCD被引 3    
6.  杨冬丽. 泡沫铝复合结构的应力波防护性能研究. 兵工学报,2014,35(1):96-101 CSCD被引 2    
7.  王宇新. 冲击载荷作用下多孔材料复合结构防爆理论计算. 兵工学报,2006,27(2):375-379 CSCD被引 24    
8.  Wang Y H. Blast performance of water tank with energy absorbing support. Thin-Walled Structure,2015,96:1-10 CSCD被引 1    
9.  Qiu X. Dynamic response of a clamped circular sandwich plate subject to shock loading. Journal of Applied Mechanics-Transactions of the ASME,2004,71(5):637-645 CSCD被引 23    
10.  Qin Q H. Impulsive loading of a fully clamped circular metallic foam core sandwich plate. Proceedings of the 7th International Conference on Shock & Impact Loads on Structures,2007 CSCD被引 1    
11.  Nemat-Nasser S. Experimental investigation of energy-absorption characteristics of components of sandwich structures. International Journal of Impact Engineering,2007,34(6):1119-1146 CSCD被引 20    
12.  Shen J H. Experiments on curved sandwich panels under blast loading. International Journal of Impact Engineering,2010,37(9):960-970 CSCD被引 15    
13.  Radford D D. The response of clamped sandwich plates with metallic foam cores to simulated blast loading. International Journal of Solids and Structures,2006,43(7/8):2243-2259 CSCD被引 50    
14.  Sriram R. Blast impact response of aluminum foam sandwich composites. Journal of Materials Science,2006,41(13):4023-4039 CSCD被引 4    
15.  Zhu F. Structural response and energy absorption of sandwich panels with an aluminium foam core under blast loading. Advanced in Structural Engineering,2008,11(5):525-536 CSCD被引 12    
16.  Mohan K. Impact response of aluminum foam core sandwich structures. Materials Science and Engineering A,2011,529:94-101 CSCD被引 15    
17.  Styles M. The effect of core thickness on the flexural behaviour of aluminium foam sandwich structures. Composite Structures,2007,80(4):532-538 CSCD被引 12    
18.  张培文. 爆炸载荷作用下不同面板厚度对泡沫铝夹芯板动力响应的影响. 高压物理学报,2013,27(5):699-703 CSCD被引 10    
19.  Kumar P D. Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading. International Journal of Impact Engineering,2008,35(9):1063-1074 CSCD被引 41    
20.  Rememmikov A M. A review of methods for predicting bomb blast effects on buildings. Journal of Battlefield Technologh,2003,6(3):5-10 CSCD被引 1    
引证文献 12

1 郭荞毓 泡沫铝复合结构的制备和研究现状 轻金属,2017(2):51-57
CSCD被引 0 次

2 李志斌 梯度温度场中多胞材料牺牲层的抗冲击分析 兵工学报,2017,38(12):2463-2471
CSCD被引 0 次

显示所有12篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号