3D打印技术研究现状和关键技术
Research Status and Key Technologies of 3D Printing
查看参考文献29篇
|
文摘
|
本文首先简要介绍了3D打印技术的基本原理及分类,然后重点介绍了有关金属材料3D打印的几种方法:电子束熔化成形(EBM)、激光选区熔化成形(SLM)、激光快速成形技术(LDMD)。 简述了金属材料3D打印的应用领域及国内外发展情况及研究现状。文章最后结合国内外金属材料3D打印的研究现状,指出金属材料3D打印需要在打印用粉末、金属3D打印设备、3D打印零件无损检测方法、3D打印零件的失效行为和寿命预测等方面进行重点研究,并建立3D打印零件的无损检测标准规范以及3D打印材料全面力学性能数据库。 |
|
其他语种文摘
|
After introducing the principle and classification of 3D printing, methods for metal forming using 3D printing were reviewed in details, including electron beam melting (EBM), selective laser melting (SLM), laser direct melting deposition (LDMD). The application fields of metal 3D printing and research status overseas and domestic were also discussed in this paper. At last, based on the current development of metal 3D printing, this paper summarized the key issues that should be solved,which include the quality of powders, the usage of 3D printing equipments, nondestructive testing for 3D printing components, the failure analysis and prediction of lifecycles for 3D printing components. The standards of nondestructive testing for 3D printing components should be established and the database of comprehensive mechanical properties for 3D printing materials should be built. |
|
来源
|
材料工程
,2016,44(2):122-128 【核心库】
|
|
DOI
|
10.11868/j.issn.1001-4381.2016.02.019
|
|
关键词
|
3D打印
;
增材制造
;
金属材料
|
|
地址
|
1.
北京航空材料研究院, 北京, 100095
2.
空军驻沈飞工业集团有限公司军代表室, 沈阳, 110034
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-4381 |
|
学科
|
金属学与金属工艺 |
|
基金
|
北京市科委科技创新与产业培育专项
|
|
文献收藏号
|
CSCD:5648097
|
参考文献 共
29
共2页
|
|
1.
江洪. 3D打印技术的发展分析.
新材料产业,2013(10):30-35
|
CSCD被引
6
次
|
|
|
|
|
2.
余冬梅. 3D打印:技术和应用.
金属世界,2013(6):6-11
|
CSCD被引
6
次
|
|
|
|
|
3.
郭朝邦. 3D打印技术及其军事应用发展动态.
战术导弹技术,2013(6):1-4
|
CSCD被引
6
次
|
|
|
|
|
4.
王华明. 大型钛合金结构激光快速成形技术研究进展.
航空精密制造技术,2008,44(6):28-30
|
CSCD被引
24
次
|
|
|
|
|
5.
Arcella F G. Producing titanium aerospace components from powder using laser forming.
Journal of the Minerals, Metals and Materials Society,2000,52:28-30
|
CSCD被引
52
次
|
|
|
|
|
6.
李怀学. 金属零件激光增材制造技术的发展及应用.
航空制造技术,2012,20:26-31
|
CSCD被引
4
次
|
|
|
|
|
7.
尹华. 金属粉末选区激光熔化技术的研究现状及其发展趋势.
热加工工艺,2010,39(1):140-144
|
CSCD被引
15
次
|
|
|
|
|
8.
董鹏. 国外选区激光熔化成形技术在航空航天领域应用现状.
航天制造技术,2014,2(1):1-5
|
CSCD被引
21
次
|
|
|
|
|
9.
Chlebus E. Microstructure and mechanical behaviour of Ti-6Al-7Nb alloy produced by selective laser melting.
Materials Characterization,2011,62(5):488-495
|
CSCD被引
25
次
|
|
|
|
|
10.
Buchbinder D. High power selective laser melting (HP SLM) of aluminum parts.
Physics Procedia,2011(12):271-278
|
CSCD被引
55
次
|
|
|
|
|
11.
Brandl E. Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM):microstructure, high cycle fatigue, and fracture behavior.
Materials & Design,2012,34:159-169
|
CSCD被引
58
次
|
|
|
|
|
12.
Vrancken B. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties.
Journal of Alloys and Compounds,2012,541:177-185
|
CSCD被引
119
次
|
|
|
|
|
13.
Amato K N. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting.
Acta Materialia,2012,60(5):2229-2239
|
CSCD被引
52
次
|
|
|
|
|
14.
Jevremovic D. A selective laser melted Co-Cr alloy used for the rapid manufacture of removable partial denture frameworks-initial screening of biocompatibility.
Journal of the Serbian Chemical Society,2011,76(1):43-52
|
CSCD被引
2
次
|
|
|
|
|
15.
Jevremovic D. The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD).
Metalurgija,2012,51(2):171-174
|
CSCD被引
8
次
|
|
|
|
|
16.
Bennett R C. Selective laser melting-applications and developments using MCP realize SLM.
Proeeedings of the Fourth Laser Assisted Net Shape Engineering,2004:545
|
CSCD被引
1
次
|
|
|
|
|
17.
Abe F. Influence of forming conditions on the titanium model in rapid proto-typing with the selective laser melting process.
Journal of Mechanical Engineering Science,2003,217:120-126
|
CSCD被引
4
次
|
|
|
|
|
18.
Schleifenbaum H. Individualized production by means of high power selective laser melting.
Journal of Manufacturing Science and Technology,2010,2(3):161-169
|
CSCD被引
6
次
|
|
|
|
|
19.
黄卫东. 金属材料激光立体成形技术.
材料工程,2002(3):40-43
|
CSCD被引
42
次
|
|
|
|
|
20.
张永忠. 金属零件激光快速成型技术研究.
材料导报,2001,15(12):10-13
|
CSCD被引
3
次
|
|
|
|
|
了解气象卫星更多信息，请访问