Analysis of bulging process of aluminum alloy by overlapping sheet metal and its formability
铝合金覆层板胀形过程及成形性能
查看参考文献16篇
|
文摘
|
The influences of strength coefficient K, work hardening exponent n and thickness t of the overlapping sheet on bulging process are analyzed based on hardening material model. Also, bulging experiments are carried out by taking the aluminum alloy LF21 as formed sheet metal, and selecting overlapping sheet with different thicknesses and material properties, by which accuracy of the above analysis result is verified in the aspects of geometric shape, thickness distribution and limit bulging height. The results show that higher strength coefficient K, larger work hardening exponent n and proper thickness of the overlapping sheet are helpful to improve the formability and forming uniformity of formed sheet metal. |
|
其他语种文摘
|
基于幂硬化材料模型,分析覆板材料强度系数K、加工硬化指数n及厚度t对成形板材胀形性能的影响,并以铝合金LF21为研究对象,选择不同厚度及性能的覆板进行了粘性介质压力胀形实验,从覆板材料性能及厚度等方面对板材胀形试件几何形状、壁厚分布规律及极限胀形高度等方面验证了分析结果的准确性。研究结果表明:覆板成形时,选择强度系数K较高、加工硬化指数n值较大及适当厚度的覆板有助于板材成形性能的提高。 |
|
来源
|
Transactions of Nonferrous Metals Society of China
,2015,25(4):1050-1055 【核心库】
|
|
DOI
|
10.1016/S1003-6326(15)63697-4
|
|
关键词
|
overlapping sheet
;
aluminum alloy
;
bulging
;
power hardening material
;
formability
|
|
地址
|
1.
Faculty of Aerospace Engineering, Shenyang Aerospace University, Shenyang, 110136
2.
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, 150001
|
|
语种
|
英文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1003-6326 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家自然科学基金
;
supported by the Liaoning Provincial Committee of Education, China
|
|
文献收藏号
|
CSCD:5430018
|
参考文献 共
16
共1页
|
|
1.
Liu Yanhui. Super plastic bulk metallic glasses at room temperature.
Science,2007,315:1385-1388
|
CSCD被引
158
次
|
|
|
|
|
2.
Chen F K. Stamping formability of pure titanium sheets.
Journal of Materials Processing Technology,2005,170(1/2):181-186
|
CSCD被引
15
次
|
|
|
|
|
3.
Chan L C. Material sensitivity and formability prediction of warm-forming magnesium alloy sheets with experimental verification.
International Journal of Advanced Manufacturing Technology,2014,71:253-262
|
CSCD被引
6
次
|
|
|
|
|
4.
Song Hui. Microcrack healing and local recrystallization in pre-deformed sheet by high density electro pulsing.
Materials Science and Engineering A,2008,490(1/2):1-6
|
CSCD被引
25
次
|
|
|
|
|
5.
Hu X H. Enhanced formability in sheet metals produced by cladding a high strain-rate sensitive layer.
Journal of Applied Mechanics,2014,81(2):021007
|
CSCD被引
1
次
|
|
|
|
|
6.
Liu Jianguang. Formability of AA5052/polyethylene/AA5052 sandwich sheets.
Transactions Nonferrous Metals Society of China,2013,23(4):964-969
|
CSCD被引
4
次
|
|
|
|
|
7.
Xu Yongchao. Effects of pre-bulging on 2024 aluminum alloy complex-shaped components.
Journal of the Minerals, Metals and Materials Society,2011,63(5):39-41
|
CSCD被引
5
次
|
|
|
|
|
8.
Cui Xiaolei. Progress on effects of through-thickness normal stress on sheet metal forming limit.
Journal of Plasticity Engineering,2013,20(2):1-9
|
CSCD被引
1
次
|
|
|
|
|
9.
Tseng Huangchi. Experimental and numerical analysis of titanium/aluminum clad metal sheets in sheet hydroforming.
International Journal of Advanced Manufacturing Technology,2011,54(1/4):93-111
|
CSCD被引
1
次
|
|
|
|
|
10.
Wang Zhongjin. Deformation behavior of TC 1 titanium alloy sheet under double-sided pressure.
Transactions Nonferrous Metals Society of China,2008,18(1):72-76
|
CSCD被引
12
次
|
|
|
|
|
11.
Yilamua K. Air bending and springback of stainless steel clad aluminum sheet.
Journal of Materials Processing Technology,2010,210:272-278
|
CSCD被引
17
次
|
|
|
|
|
12.
Liu J. Loading mode effects on sheet formability in viscous pressure forming (VPF).
Materials Research Innovations,2011,15(1):295-298
|
CSCD被引
1
次
|
|
|
|
|
13.
Semiatin S L. Forming limits of sandwich sheet materials.
Metallurgical Transactions A,1979,10:1107-1118
|
CSCD被引
3
次
|
|
|
|
|
14.
Masanori K. Improvement of pure stretchability by overlapping sheet metals.
Journal of the Japan Society for Technology of Plasticity,2001,42(4):328-332
|
CSCD被引
2
次
|
|
|
|
|
15.
Tseng Huangchi. An analysis of the formability of aluminum/copper clad metals with different thicknesses by the finite element method and experiment.
International journal of Advanced Manufacturing Technologies,2010,49:1029-1036
|
CSCD被引
17
次
|
|
|
|
|
16.
Masashi H. Press forming of clad sheets.
Japan Society for Technology of Plasticity,1985,26(4):385-393
|
CSCD被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问