一种有限元转化为颗粒离散元的方法及其应用研究
A procedure for transiting FEM into DEM and its application
查看参考文献19篇
|
文摘
|
为了充分发挥有限元与颗粒离散元各自的优势,提出了一种由有限元转化为颗粒流的方法。数值模型首先用较粗的有限元网格进行离散,并在单元上引入连续介质本构模型。力学计算开始后,实时跟踪各单元的应力状态。一旦某单元的应力满足Mohr-Coulomb准则或最大拉应力准则,删除该单元,同时创建具有一定数目、随机分布且微嵌入的颗粒簇。其后,该单元所在区域的非连续变形及失稳断裂由颗粒簇演化获得。各颗粒的质量、材料参数、速度、位移、接触力等信息根据插值从有限元单元中继承。为了实现有限元与颗粒流接触面的耦合计算,引入了点-棱(二维)及点-面(三维)接触模型,通过法向及切向弹簧实现接触力的计算。颗粒球与有限元板的碰撞分析、单轴压缩、岩石切割等案例展示了上述方法的精确性及合理性。 |
|
其他语种文摘
|
To take the advantages of both the FEM and the particle DEM methods, a procedure is proposed to transit the FEM into the DEM. In this procedure, the domain of concern is first discretized into a certain number of coarse FEM elements, and the behavior of each element is characterized by using a continuum constitutive model. During simulation, the stress state of each element is tracked for each time step. Once if the stress state of an element satisfies either the Mohr-Coulomb criteria or the maximum tensile stress criteria, the element is deleted and immediately replaced by a cluster of particles, which are randomly distributed and slightly interpenetrated. As such, the response of the deleted element is fully described by this cluster of particles. The particle properties of the cluster, including mass, material properties, velocity, displacement and contact force, are all inherited from the deleted element by using an interpolation method. To realize the simulation coupling FEM and particle DEM, the point-edge (2D) and point-face (3D) contact models are introduced, and the contact forces are calculated using normal and tangent numerical springs. Numerical examples such as the impact of a particle ball onto a slab, the uniaxial compression and rock cutting, are provided to illustrate the capability of the proposed method. |
|
来源
|
岩土力学
,2015,36(4):1027-1034 【核心库】
|
|
DOI
|
10.16285/j.rsm.2015.04.017
|
|
关键词
|
数值方法
;
有限元
;
颗粒离散元
;
耦合转化模型
;
渐进破坏
|
|
地址
|
中国科学院力学研究所, 中国科学院流固耦合系统力学重点实验室, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1000-7598 |
|
学科
|
力学 |
|
基金
|
国家科技支撑计划项目
;
国家自然科学基金青年科学基金
|
|
文献收藏号
|
CSCD:5406482
|
参考文献 共
19
共1页
|
|
1.
李世海. 论滑坡稳定性分析方法.
岩石力学与工程学报,2009,28(增刊2):3309-3324
|
被引
39
次
|
|
|
|
|
2.
Miehe C. A robust algorithm for configurational-force-driven brittle crack propagation with R-adaptive mesh alignment.
International Journal for Numerical Methods in Engineering,2007,72(2):127-155
|
被引
5
次
|
|
|
|
|
3.
Khoei A R. Modeling of crack propagation via an automatic adaptive mesh refinement based on modified superconvergent patch recovery technique.
Engineering Fracture Mechanics,2008,75(10):2921-2945
|
被引
10
次
|
|
|
|
|
4.
Dolbow J. A finite element method for crack growth without remeshing.
International Journal for Numerical Methods in Engineering,1999,46:131-150
|
被引
334
次
|
|
|
|
|
5.
Asadpoure A. Developing new enrichment functions for crack simulation in orthotropic media by the extended finite element method.
International Journal for Numerical Methods in Engineering,2007,69(10):2150-2172
|
被引
7
次
|
|
|
|
|
6.
Gordeliy E. Implicit level set schemes for modeling hydraulic fractures using the XFEM.
Computer Methods in Applied Mechanics and Engineering,2013,266:125-143
|
被引
13
次
|
|
|
|
|
7.
Jiang Y. Simulation of cracking near a large underground cavern in a discontinuous rock mass using the expanded distinct element method.
International Journal of Rock Mechanics and Mining Sciences,2009,46(1):97-106
|
被引
8
次
|
|
|
|
|
8.
Amarasiri A L. Numerical modelling of desiccation cracking using the cohesive crack method.
International Journal of Geomechanics,2011,13(3):213-221
|
被引
1
次
|
|
|
|
|
9.
Barla M. Rock slide simulation with the combined finite-discrete element method.
International Journal of Geomechanics,2011,12(6):711-721
|
被引
5
次
|
|
|
|
|
10.
Li S H. A new numerical method for DEM-block and particle model.
International Journal of Rock Mechanics and Mining Sciences,2004,41(3):436-436
|
被引
25
次
|
|
|
|
|
11.
Cottrell M G. The numerical modelling of ceramics subject to impact using adaptive discrete element techniques.
Engineering Computations,2003,20(1):82-106
|
被引
1
次
|
|
|
|
|
12.
王杰. 模拟岩石破裂过程的块体单元离散弹簧模型.
岩土力学,2013,34(8):2355-2362
|
被引
17
次
|
|
|
|
|
13.
Vesga L F. DEM analysis of the crack propagation in brittle clays under uniaxial compression tests.
International Journal for Numerical and Analytical Methods in Geomechanics,2008,32(11):1405-1415
|
被引
4
次
|
|
|
|
|
14.
Yang D. Dynamic simulation of crack initiation and propagation in cross-ply laminates by DEM.
Composites Science and Technology,2011,71(11):1410-1418
|
被引
1
次
|
|
|
|
|
15.
Utili S. DEM analysis of bonded granular geomaterials.
International Journal for Numerical and Analytical Methods in Geomechanics,2008,32(17):1997-2031
|
被引
20
次
|
|
|
|
|
16.
Yang B. A study on the effects of microparameters on macroproperties for specimens created by bonded particles.
Engineering Computations,2006,23(6):607-631
|
被引
21
次
|
|
|
|
|
17.
Onate E. Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems.
Computer Methods in Applied Mechanics and Engineering,2004,193(27):3087-3128
|
被引
36
次
|
|
|
|
|
18.
Rojek J. Multiscale analysis using a coupled discrete/finite element model.
Interaction and Multiscale Mechanics,2007,1(1):1-31
|
被引
6
次
|
|
|
|
|
19.
Feng C. A semi-spring and semi-edge combined contact model in CDEM and its application to analysis of Jiweishan landslide.
Journal of Rock Mechanics and Geotechnical Engineering,2014,6(1):26-35
|
被引
30
次
|
|
|
|
|
了解气象卫星更多信息，请访问