汽车车身用6000系铝合金板材微观组织与热处理工艺的研究进展
Research Progress on Microstructure and Heat Treatment of 6000 Series Aluminum Alloys Sheet for Automotive Body
查看参考文献74篇
|
文摘
|
本文介绍了6000系铝合金在汽车车身上的应用现状及其性能特点,并详细论述了该系合金的时效析出特征、强化机理、织构演化和合金元素对性能的影响。此外,分析了6000系铝合金的传统热处理工艺,阐述了固溶后预时效和预变形对合金烘烤硬化性的影响,并探讨了汽车车身用6000系铝合金目前存在的问题及当前的主要研究方向。 |
|
其他语种文摘
|
The properties and application status of 6000 series aluminum alloys in automotive body panel were introduced. Besides, the precipitation behavior, strengthening mechanism, texture evolution and the influence of alloying element to properties were also discussed in detail. Additionally, the conventional heat treatment and the effect of pre-aging or pre-straining to bake hardening were described. Then some current problems and research directions about 6000 series aluminum alloys for automotive body were discussed. |
|
来源
|
材料工程
,2014(12):104-113 【核心库】
|
|
DOI
|
10.11868/j.issn.1001-4381.2014.12.018
|
|
关键词
|
6000系铝合金
;
轻量化
;
烘烤强化
;
析出相
|
|
地址
|
1.
重庆大学材料科学与工程学院, 重庆, 400044
2.
西南铝业(集团)有限责任公司, 重庆, 401326
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-4381 |
|
学科
|
金属学与金属工艺 |
|
基金
|
中央高校基本科研业务费专项资金
|
|
文献收藏号
|
CSCD:5298766
|
参考文献 共
74
共4页
|
|
1.
Millera W S. Recent development in aluminium alloys for the automotive industry.
Materials Science and Engineering:A,2000,280(1):37-49
|
CSCD被引
332
次
|
|
|
|
|
2.
Hung N. Improved formability of aluminum alloys using laser induced hardening of tailored heat treated blanks.
Physics Procedia,2012,39:318-326
|
CSCD被引
8
次
|
|
|
|
|
3.
Davidkov A. Microstructure and hemming properties of AA6016 aluminum alloy sheets.
Key Engineering Materials,2011,465:451-454
|
CSCD被引
3
次
|
|
|
|
|
4.
Rometsch P A. Atom probe analysis of early-stage strengthening behaviour in an Al-Mg-Si-Cu alloy.
Ultramicroscopy,2011,111(6):690-694
|
CSCD被引
4
次
|
|
|
|
|
5.
Cao L. Clustering behaviour in an Al-Mg-Si-Cu alloy during natural ageing and subsequent under-ageing.
Materials Science and Engineering:A,2013,559(1):257-261
|
CSCD被引
13
次
|
|
|
|
|
6.
Seyedrezai H. Study of the early stages of clustering in Al-Mg-Si alloys using the electrical resistivity measurements.
Materials Science and Engineering:A,2009,525(1/2):186-191
|
CSCD被引
12
次
|
|
|
|
|
7.
Marioara C D. The effect of Cu on precipitation in Al-Mg-Si alloys.
Philosophical Magazine,2007,87(23):3385-3413
|
CSCD被引
30
次
|
|
|
|
|
8.
Torsaeter M. Study of intergrown L and Q' precipitates in Al-Mg-Si-Cu alloys.
Scripta Materialia,2011,64(9):817-820
|
CSCD被引
20
次
|
|
|
|
|
9.
Kim J. Effects of Cu and Ag additions on age-hardening behavior during multi-step aging in Al-Mg-Si alloys.
Materials Science and Engineering: A,2013,560(10):154-162
|
CSCD被引
9
次
|
|
|
|
|
10.
Torsaeter M. Applying precipitate-host lattice coherency for compositional determination of precipitates in Al-Mg-Si-Cu alloys.
Philosophical Magazine,2012,92(31):3833-3856
|
CSCD被引
1
次
|
|
|
|
|
11.
Serizawa A. Three-dimensional atom probe characterization of nanoclusters responsible for multistep aging behavior of an Al-Mg-Si alloy.
Metallurgical and Materials Transactions A,2008,39(2):243-251
|
CSCD被引
32
次
|
|
|
|
|
12.
Teichmann K. The effect of preaging deformation on the precipitation behavior of an Al-Mg-Si alloy.
Metallurgical and Materials Transactions A,2012,43(11):4006-4014
|
CSCD被引
5
次
|
|
|
|
|
13.
Shen C H. Pre-treatment to improve the bake-hardening response in the naturally aged Al-Mg-Si alloy.
Journal of Materials Science and Technology,2011,27(3):205-212
|
CSCD被引
9
次
|
|
|
|
|
14.
Masuda T. Combined effect of pre-straining and pre-aging on bake-hardening behavior of an Al-0.6 mass%Mg-1.0 mass%Si alloy.
Materials Transactions,2010,51(2):325-332
|
CSCD被引
2
次
|
|
|
|
|
15.
Fridlyander I N. Aluminium alloys promising materials.
Metal Science and Heat Treatment,2002,44(9/10):365-370
|
CSCD被引
14
次
|
|
|
|
|
16.
Takeo S. The latest trends in aluminum alloy sheets for automotive body panels.
Kobelco Technology Review,2008(28):22-28
|
CSCD被引
1
次
|
|
|
|
|
17.
Mukhopadhyay P. Alloy designation, processing, and use of AA6XXX series aluminium alloys.
ISRN Metallurgy,2012,2012:1-15
|
CSCD被引
5
次
|
|
|
|
|
18.
Perovic A. Precipitation in aluminium alloys AA6111 and AA6016.
Scripta Materialia,1999,41(9):703-708
|
CSCD被引
7
次
|
|
|
|
|
19.
Kamat R G. Alloy 6022-T4E29 for automotive sheet applications.
Materials Science Forum,2002,396/402:1591-1596
|
CSCD被引
15
次
|
|
|
|
|
20.
Cao L. Effect of pre-ageing and natural ageing on the paint bake response of alloy AA6181A.
Materials Science and Engineering:A,2013,571(1):77-82
|
CSCD被引
7
次
|
|
|
|
|
了解气象卫星更多信息，请访问