|
导气与枪管浮动混合式自动机动力学特性研究
Dynamics Characteristics of Automatic Mechanism for Gas Operated and Floating Barrel Operated Automatic Action
查看参考文献11篇
文摘
|
为了研究导气与枪管浮动混合式自动机在高初速榴弹发射器上应用的可行性及通过调节导气装置结构参数匹配枪管组件与枪机框组件后坐能量达到降低武器系统后坐力的目的,基于气体动力学理论和热力学理论,推导考虑热量散失及枪管浮动作用的内弹道和导气装置气流问题的基本方程组。利用该计算模型对高初速榴弹发射器发射动力学进行仿真,得出武器系统自动机运动特性曲线及后坐力随时间变化的曲线。将仿真结果与实验结果进行对比,验证模型的正确性。探讨导气装置导气孔直径、导气孔开孔位置、导气室初始容积结构参数对导气室气体压力变化的影响规律,并分析其对自动机速度曲线及后坐力的影响。在完成自动机自动循环的前提下,采用导气与枪管浮动混合式自动机可将武器的最大后坐力控制在1 100 N内,实现武器低后坐发射。 |
其他语种文摘
|
In order to perform the feasibility study on the application of automatic mechanism for gas and floating barrel operated automatic action in high muzzle velocity grenade launcher(HMVGL) and reduce the recoil of weapon system, the structure parameters of gas operated device is adjusted, and the recoil energies of the barrel and bolt carrier assembly are matched. The basic equations of interior ballistic and flow problems which consider the effects of heat loss and floating barrel are derived based on aerodynamics and thermodynamics. The performance characteristics of automatic mechanism and the recoil-time curve are obtained by the calculation and simulation of launch dynamics of HMVGL. The reliability of the model is validated by comparing the simulation and experimental results. The pressure fluctuation of gas chamber is discussed with regard to gasport diameter, gas-port position and initial gas volume. The speed curves of automatic mechanism and the recoil curve are also analyzed. By means of automatic mechanism based on the gas and floating barrel operated automatic action, the maximum recoil of HMVGL can be limited within 1 100 N to achieve a low recoil launching. |
来源
|
兵工学报
,2014,35(6):753-761 【核心库】
|
DOI
|
10.3969/j.issn.1000-1093.2014.06.001
|
关键词
|
兵器科学与技术
;
自动武器
;
导气装置
;
浮动枪管
;
气体动力学
;
建模与仿真
|
地址
|
南京理工大学机械工程学院, 江苏, 南京, 210094
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1000-1093 |
学科
|
自动化技术、计算机技术 |
基金
|
国家自然科学基金
|
文献收藏号
|
CSCD:5171654
|
参考文献 共
11
共1页
|
1.
易声耀.
自动武器原理与构造学,2009:87-88
|
CSCD被引
1
次
|
|
|
|
2.
李涛. 某型转管机枪导气装置参数与射频关系研究.
科技通报,2013,29(3):116-119
|
CSCD被引
1
次
|
|
|
|
3.
韩晓明. 内能源转管武器导气装置结构参数优化设计.
火炮发射与控制学报,2008(2):50-53
|
CSCD被引
2
次
|
|
|
|
4.
冉景禄. 导气式自动武器变质量热力学计算模型研究.
兵工学报,2011,32(4):408-413
|
CSCD被引
6
次
|
|
|
|
5.
徐诚.
火炮与自动武器动力学,2006:164-187
|
CSCD被引
1
次
|
|
|
|
6.
廖振强.
武器气体动力学数值计算方法,2005:191-198,217-232
|
CSCD被引
3
次
|
|
|
|
7.
金志明.
枪炮内弹道学,2004:9-117
|
CSCD被引
13
次
|
|
|
|
8.
刘巍. 某型航炮气压缓冲器结构优化设计与强度分析.
系统仿真学报,2012,24(65):1143-1147
|
CSCD被引
2
次
|
|
|
|
9.
郭锦炎. 新型活塞式中心抛撒机构的内弹道仿真研究.
兵工学报,2013,34(2):149-153
|
CSCD被引
7
次
|
|
|
|
10.
王宝元. 弹丸出炮口时间测试方法研究.
兵工学报,2012,33(6):736-740
|
CSCD被引
9
次
|
|
|
|
11.
Photron.
FASTCAM-APX RS hardware manual,2004
|
CSCD被引
2
次
|
|
|
|
|
|