文摘
|
为了实现可瞄准战斗部对目标的高效毁伤,根据引制一体化技术与可瞄准战斗部配合的交会模型,分别给出了侧向攻击和前向拦截目标的导弹单发杀伤概率计算公式。基于蒙特卡洛法,通过数值仿真确定了可瞄准战斗部前向拦截目标的破片最佳扩散半径,分别研究了弹目相对速度和导弹脱靶量对杀伤概率的影响,根据研究结果提出了可瞄准战斗部侧向攻击或前向拦截目标的优先选用条件:在弹目相对速度v_r≥1 700 m/s、导弹脱靶量ρ≤2.5 m或v_r≥3 000 m/s、ρ≤4 m时,优先选用前向拦截;在v_r<1 700 m/s、ρ>2.5 m或v_r<3 000 m/s、ρ>4 m时,优先选用侧向攻击。为引制一体化技术和可瞄准战斗部的工程设计与应用提供了一定的参考。 |
其他语种文摘
|
The kill probability calculating models of one-missile to one-target for the gimbaled warhead, which is designed to fire the fragments in the target direction, are studied in order to optimize lethality. Two encounter concepts of side-attack and forward-intercept at endgame are formulated in the missile coordinate system. The kill probability is calculated using Monte-Carlo method. Based on the circular spray pattern with uniform pattern density, the optimum lethal radius is established for forward-intercept concept. And then the effects of missile-target relative velocity and miss distance on kill probability are analyzed. According to the study, the preferred conditions for side-attack or forward-intercept are proposed: if v_r≥1 700 m/s and ρ≤2.5 m or v_r≥3 000 m/s and ρ≤4 m,then the encounter concept of forward-intercept is preferable; In other cases, the encounter concept of side-attack is preferable. |
来源
|
兵工学报
,2014,35(2):176-181 【核心库】
|
DOI
|
10.3969/j.issn.1000-1093.2014.02.006
|
关键词
|
兵器科学与技术
;
防空导弹
;
引制一体化
;
可瞄准战斗部
;
引战配合
;
杀伤概率
|
地址
|
北京理工大学, 爆炸科学与技术国家重点实验室, 北京, 100081
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1000-1093 |
学科
|
武器工业 |
文献收藏号
|
CSCD:5092758
|
|
1.
Lloyd R M.
Conventional warhead systems physics and engineering design,1998:209-225
|
CSCD被引
1
次
|
|
|
|
2.
夏国洪.
智能导弹,2008:254-257
|
CSCD被引
3
次
|
|
|
|
3.
张志鸿.
防空导弹引信与战斗部配合效率和战斗部设计,1994:89-104
|
CSCD被引
2
次
|
|
|
|
4.
刘斌. 基于成像导引/激光测距的起爆控制算法.
探测与控制学报,2012,34(2):57-66
|
CSCD被引
7
次
|
|
|
|
5.
刘剑锋. 利用导引头测角信息进行遭遇段剩余飞行时间估计的算法.
兵工学报,2006,27(1):27-31
|
CSCD被引
5
次
|
|
|
|
6.
Zhuang Zhizhong. Prediction of time to go during missile-target encounter.
Journal of Astronautics,2002,23(5):32-38
|
CSCD被引
1
次
|
|
|
|
7.
张志鸿. 防空导弹引信与导引头一体化设计.
现代防御技术,1993(2):15-20
|
CSCD被引
2
次
|
|
|