单晶高温合金螺旋选晶过程的数值模拟与实验研究II.螺旋段
SIMULATION AND EXPERIMENTAL STUDIES ON GRAIN SELECTION BEHAVIOR OF SINGLE CRYSTAL SUPERALLOY II. Spiral Part
查看参考文献35篇
|
文摘
|
研究了螺旋段在选晶过程中的作用.基于金相及EBSD实验结果,指出在晶粒竞争生长过程中,晶粒二次臂取向和初始位置分布特征综合决定了晶粒的竞争优势.总结提出了选晶过程的两个几何限制机理:水平方向的二次臂竞争促进作用和竖直方向的一次臂限制作用.两种模型成功解释了螺旋段对选晶过程的作用.采用修正的元胞自动机(MCA)技术,对螺旋段的晶粒竞争生长过程进行了模拟.研究了晶粒结构及晶体取向随定向凝固过程的变化规律,并与实验结果进行了对比,两者吻合较好.基于模拟与实验的研究,获得了螺旋参数对选晶行为的影响规律及作用机理,提出了选晶器螺旋段的设计准则. |
|
其他语种文摘
|
The spiral selector is the key part for producing single crystal (SX) blades and ensures the integrity of crystal, which mainly includes starter block and spiral part. In this work, the influence of spiral part on the grain selection process was studied. Both of the metallography results and EBSD results proved that the prior location and the special orientation of the second dendrite arms were important for the grains competitive growth during the directional solidification process. Based on the experimental results, two geometrical restrict mechanisms of grain selection were proposed. They were the competitive stimulating effect on the second dendrite arms in horizontal direction, which was resulted from the spiral arc shape, and the growing blocking effect on the primary dendrites in vertical direction, which was resulted from the take-off angle of the spiral part. These models could successfully explain the grain selecting effects of the spiral part. The modified cellular automaton (MCA) technology was used to simulate the grains' competitive growth in spiral part. The changes of grains structure and orientation as the grain growing on were studied. The simulated and experimental results were compared and agreed well. Based on the simulated and experimental results, Influences of structural parameters on the grain selection behavior were proposed. The criteria for designing spiral part were also presented. |
|
来源
|
金属学报
,2013,49(12):1521-1531 【核心库】
|
|
DOI
|
10.3724/sp.j.1037.2013.00214
|
|
关键词
|
数值模拟
;
选晶行为
;
晶粒取向
;
EBSD
|
|
地址
|
1.
清华大学材料学院, 先进成形制造教育部重点实验室, 北京, 100084
2.
沈阳黎明航空发动机(集团)有限责任公司, 沈阳, 110043
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0412-1961 |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家973计划
;
国家自然科学基金
;
国家重大科技专项
|
|
文献收藏号
|
CSCD:5025723
|
参考文献 共
35
共2页
|
|
1.
Goulette M J.
Superalloys 1984,1984:167
|
CSCD被引
1
次
|
|
|
|
|
2.
毛协民(译).
凝固原理,1987:20
|
CSCD被引
1
次
|
|
|
|
|
3.
Glicksman M E.
Principles of Solidification an Introduction to Modem Casting and Crystal Growth Concepts,2011:305
|
CSCD被引
1
次
|
|
|
|
|
4.
Kurz W.
Acta Mater,1981,29:11
|
CSCD被引
124
次
|
|
|
|
|
5.
Kurz W.
Acta Metall,1986,34:823
|
CSCD被引
195
次
|
|
|
|
|
6.
Oldfield W.
Mater Sci Eng,1973,11:211
|
CSCD被引
1
次
|
|
|
|
|
7.
Reed R C.
The Superalloys Fundamentals and Applications,2006:121
|
CSCD被引
3
次
|
|
|
|
|
8.
师昌绪. 我国高温合金的发展与创新.
金属学报,2010,46:1281
|
CSCD被引
85
次
|
|
|
|
|
9.
Gandin C A.
Metall Mater Trans. A,1994,25:629
|
CSCD被引
12
次
|
|
|
|
|
10.
Gandin C A.
Acta Mater,1997,45:2187
|
CSCD被引
43
次
|
|
|
|
|
11.
Gandin C A.
Acta Metall Mater,1994,42:2233
|
CSCD被引
144
次
|
|
|
|
|
12.
Gandin C A.
Metall Mater Trans. A,1999,30:3153
|
CSCD被引
65
次
|
|
|
|
|
13.
Rappaz M.
Acta Metall Mater,1993,41:345
|
CSCD被引
207
次
|
|
|
|
|
14.
唐宁. 重型燃气轮机叶片熔模铸造过程数值模拟.
特种铸造及有色合金,2011,31:1028
|
CSCD被引
9
次
|
|
|
|
|
15.
潘冬. 考虑炉壁温度变化的高温合金叶片定向凝固过程模拟.
金属学报,2010,46:294
|
CSCD被引
6
次
|
|
|
|
|
16.
于靖. 基于一种改进CA模型的微观组织模拟.
金属学报,2007,43:731
|
CSCD被引
13
次
|
|
|
|
|
17.
郭勇冠. DZ125高温合金定向凝固微观组织的CA法模拟.
金属学报,2008,44:365
|
CSCD被引
14
次
|
|
|
|
|
18.
单博炜. 元胞自动机模型模拟枝晶一次间距的选择.
金属学报,2008,44:1042
|
CSCD被引
11
次
|
|
|
|
|
19.
柳百成.
中国机械工程,2000,11:76
|
CSCD被引
1
次
|
|
|
|
|
20.
Zhang H.
Sci China (Engl Lett). E,2011,54:3191
|
CSCD被引
3
次
|
|
|
|
|
了解气象卫星更多信息，请访问