冷喷涂制备复合材料涂层研究现状
State-of-the-art of Cold Spraying Composite Coatings
查看参考文献81篇
文摘
|
鉴于目前冷喷涂技术制备复合材料涂层受到国内外越来越多学者的关注,本文在大量文献分析的基础上对冷喷涂制备复合材料涂层进行了分类和总结。首先,探讨了喷涂前粉末准备和喷涂工艺参数对复合材料涂层的影响;其次,归纳了冷喷涂制备的金属-金属、金属-陶瓷、金属-金属间化合物以及纳米复合材料涂层等研究成果;最后,分析了冷喷涂制备复合材料涂层的应用前景和当前存在的主要问题。 |
其他语种文摘
|
Based on the fact that cold spraying (CS) was increasingly attracting more and more attention from researchers worldwide, this paper made detailed summarization and discussion on fabricating composite coatings via CS according to the published literature. Firstly, the powder preparation methods prior to spraying and the effects of processing parameters on deposition of composite coatings were explored. And then, the fabrication of metal-metal, metal-ceramic, metal-intermetallics and nano-composite coatings were summarized. Eventually, the present problems and potential applications existing in composite coatings fabricated by CS were discussed. |
来源
|
材料工程
,2013(8):1-10 【核心库】
|
DOI
|
10.3969/j.issn.1001-4381.2013.08.001
|
关键词
|
冷喷涂
;
复合粉末
;
工艺参数
;
复合材料涂层
|
地址
|
1.
西北工业大学, 凝固技术国家重点实验室, 西安, 710072
2.
贝尔福-蒙贝利亚技术大学, 法国, 贝尔福, 90010
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1001-4381 |
学科
|
一般工业技术;金属学与金属工艺 |
基金
|
国家教育部新世纪优秀人才支持计划
;
国家教育部霍英东教育基金
;
国家教育部高等学校学科创新引智计划项目
|
文献收藏号
|
CSCD:4917633
|
参考文献 共
81
共5页
|
1.
Papyrin A. Cold spray technology.
Adv Mater Process,2001,159(9):49-51
|
CSCD被引
27
次
|
|
|
|
2.
Alkimov A P. A method of cold gas dynamic deposition.
Dold Akad Nauk SSSR,1990,315(5):1062-1065
|
CSCD被引
3
次
|
|
|
|
3.
Li C J. Optimal design of a novel cold spray gun nozzle at a limited space.
J Therm Spray Techn,2005,14(3):391-395
|
CSCD被引
1
次
|
|
|
|
4.
Li W Y. Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powder.
Mater Des,2007,28(7):2129-2137
|
CSCD被引
15
次
|
|
|
|
5.
Klinkov S V. Deposition of multicomponent coatings by cold spray.
Surf Coat Tech,2008,202(24):5858-5862
|
CSCD被引
8
次
|
|
|
|
6.
.
MIL-STD-3021, Department of defense manufacturing process standard materials deposition of cold spray
|
CSCD被引
1
次
|
|
|
|
7.
Wang H T. Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al_2O_3 intermetallic composite coating.
Vacuum,2008,83(1):146-152
|
CSCD被引
9
次
|
|
|
|
8.
Luo X T. High strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite through high velocity impact.
Scripta Mater,2011,65(7):581-584
|
CSCD被引
6
次
|
|
|
|
9.
Phani P S. Effect of heat treatment on properties of cold sprayed nanocrystalline copper alumina coatings.
Acta Mater,2007,55(14):4741-4751
|
CSCD被引
17
次
|
|
|
|
10.
黄春杰. 冷喷涂制备颗粒增强钛基复合材料涂层研究.
材料工程,2013(4):1-5
|
CSCD被引
7
次
|
|
|
|
11.
Lima R S. Microstructural characteristics of cold-sprayed nanostructured WC-Co coatings.
Thin Solid Films,2002,416(1/2):129-135
|
CSCD被引
21
次
|
|
|
|
12.
Stoltenhoff T. An analysis of the cold spray process and its coatings.
J Therm Spray Techn,2002,11(4):542-550
|
CSCD被引
37
次
|
|
|
|
13.
Eesley L G. Thermal properties of kinetic spray Al-SiC metal-matrix composite.
J Mater Res,2003,18(4):855-860
|
CSCD被引
1
次
|
|
|
|
14.
Li W Y. Characterizations of cold sprayed TiN particle reinforced Al2319 composite coating.
J Mater Process Tech,2008,202(1/3):508-513
|
CSCD被引
7
次
|
|
|
|
15.
Zhou X L. Deposition behavior of mixed binary metallic powders in cold spraying process.
Appl Surf Sci,2011,257(24):10628-10633
|
CSCD被引
2
次
|
|
|
|
16.
Price T S. A method for characterizing the degree of inter-particle bond formation in cold sprayed coatings.
J Therm Spray Techn,2007,16(4):566-570
|
CSCD被引
2
次
|
|
|
|
17.
Wang Q. The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate.
Surf Coat Tech,2010,205(1):50-56
|
CSCD被引
23
次
|
|
|
|
18.
Tao Y S. Effect of α-Al_2O_3 on the properties of cold sprayed Al/α-Al_2O_3 composite coatings on AZ91D magnesium alloy.
Appl Surf Sci,2009,256(1):261-266
|
CSCD被引
20
次
|
|
|
|
19.
Novoselova T. Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits.
J Alloy Compd,2007,436(1/2):69-77
|
CSCD被引
10
次
|
|
|
|
20.
Yu M. Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed SiCp/Al 5056 composite coatings.
Surf Coat Tech,2013,220:102-106
|
CSCD被引
4
次
|
|
|
|
|